Zeke 5,504 Posted July 6, 2018 looking for rmr pre fab slide , threaded barrel and comp. g 19 prolly a trigger group also.. asking for a friend ( wife) her ar is done. This is next Quote Share this post Link to post Share on other sites
High Exposure 5,661 Posted July 6, 2018 Best value I’ve found are the Brownells slides for $199. https://www.brownells.com/handgun-parts/slide-parts/slides/rmr-cut-slide-for-gen3-glock-9mm-prod107977.aspx They don’t look the best, but they do everything you need for less than the boutique slides or sending your own out to get milled. My Fauxland Special has the Brownells slide G19 with the lightening cut over the barrel. Barrel/comp: I like the KKM setup. Trigger - I like the Overwatch Falx, although my G19 has the Overwatch Flat Tac trigger. I prefer the curve of the Falx - flat triggers just feel weird to me. 1 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted July 6, 2018 @Smokin .50 watch this wtf is @blksheep 4 minutes ago, High Exposure said: Best value I’ve found are the Brownells slides for $199. https://www.brownells.com/handgun-parts/slide-parts/slides/rmr-cut-slide-for-gen3-glock-9mm-prod107977.aspx They don’t look the best, but they do everything you need for less than the boutique slides or sending your own out to get milled. My Fauxland Special has the Brownells slide G19 with Window. Barrel/comp: I like the KKM setup Trigger - I like the Overwatch Falx, although my G19 has the Overwatch Flat Tac trigger. @Mrs.Zeke Quote Share this post Link to post Share on other sites
High Exposure 5,661 Posted July 6, 2018 Oh, don’t forget you’ll need: • Optic - Trijicon RMR06 with Battlewerx anti flicker sealing plate • Extended controls - Glock OEM • Suppressor sights - Ameriglo • Magwell - Agency and • Grip job - Modern Materiél. You should probably also get @Mrs.Zeke a comp gun too. G34 is a nice place to start. Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted July 6, 2018 1 minute ago, High Exposure said: Oh, don’t forget you’ll need extended controls - Glock OEM, suppressor height sights - Ameriglo, a magwell - Agency, and a grip job - Modern Materiél. Don’t hold back buddy. Jeebus! you guys will make @GramGun79 proud 1 Quote Share this post Link to post Share on other sites
JD1037 125 Posted July 6, 2018 Yes to all of this Quote Share this post Link to post Share on other sites
louu 399 Posted July 6, 2018 You don't need any of that. Keep the 19 stock and get a 34 they can be found for less than $600. Put dawsonprecision.com sights on it and a DK Custom trigger kit in it and your done. I'll bring mine on Saturday if you would like to check it out. If you feel the need you can get a magwell and basepads but it's not necessary if you practice (or in my case shoot single stack) Quote Share this post Link to post Share on other sites
louu 399 Posted July 6, 2018 Also if you are planning on getting into shooting some matches with all this stuff I would highly recommend not buying anything yet. Just use what you have now and figure out what direction you want to go in. Meaning what division you want to get into. If you have good eyes you can stay in production and limited. If you need a dot on your pistol check out carry optics (CO) you'll need a gen 4 MOS 34 for that. If you want to get into true open well then zeke is gona be pissed... Quote Share this post Link to post Share on other sites
shooter28 153 Posted July 6, 2018 Im building a Poly80 so this is relevant to my interests. Slides- Ive been looking at L2D Combat and Southwest Precision for their milled slides. I know the slide cuts are just for looks, but I think they look awesome haha. Trigger- Seems like the Apex Trigger kit is the go to. Ive never tried any of the triggers before fyi Barrel- Im between Faxon, Agency and S3F TiN barrels. Sights- Ameriglo Comp- Texas Black Rifle Co 1 Quote Share this post Link to post Share on other sites
GramGun79 226 Posted July 6, 2018 Here is a little inspiration for your 19 project.@zeke @Mrs.Zeke Sent from my iPhone using Tapatalk 2 Quote Share this post Link to post Share on other sites
High Exposure 5,661 Posted July 6, 2018 JagerWerks does nice work on slides. 3 Quote Share this post Link to post Share on other sites
10X 3,296 Posted July 6, 2018 Achieving "Glock Perfection" always seems to require throwing away a lot of the parts supplied by Glock. 3 Quote Share this post Link to post Share on other sites
Krdshrk 3,877 Posted July 6, 2018 What gen glock? Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted July 6, 2018 7 minutes ago, Krdshrk said: What gen glock? Gen 4 Quote Share this post Link to post Share on other sites
JackDaWack 2,895 Posted July 6, 2018 1 hour ago, 10X said: Achieving "Glock Perfection" always seems to require throwing away a lot of the parts supplied by Glock. Hit up gun broker and find a deal on just a frame. Then build it out. Quote Share this post Link to post Share on other sites
High Exposure 5,661 Posted July 6, 2018 Don’t need to search for a deal. You can find stripped Gen 3 Glock 19 and Glock 17 frames for $70 at either Big Tex Outdoors or The Glock Store. 3 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted July 6, 2018 2 hours ago, 10X said: Achieving "Glock Perfection" always seems to require throwing away a lot of the parts supplied by Glock. Meh.. she likes it, she can do what she wants. I’m jus a helper Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted July 6, 2018 4 hours ago, GramGun79 said: Here is a little inspiration for your 19 project.@zeke @Mrs.Zeke Sent from my iPhone using Tapatalk Ummmm where’ Da brake and Rmr widdle buddy? Quote Share this post Link to post Share on other sites
LocoOcho 15 Posted July 6, 2018 The Zev slides are nice and come with RMR cut/plate but are a little pricey at $400ish stripped. From personal experience, don't get the Spartan style slide if you use a Safariland ALS Holster. The cutouts don't play nice with the locking system 2 Quote Share this post Link to post Share on other sites
High Exposure 5,661 Posted July 6, 2018 Also, ALS and comps can be problematic, especially if you have an aftermarket slide with a bull nose. You may have to hit the ALS button 2 times - once to clear the ejection port and again to clear where where the comp meets the slide. 2 Quote Share this post Link to post Share on other sites
GramGun79 226 Posted July 6, 2018 Ummmm where’ Da brake and Rmr widdle buddy?No brake on this one. I have an rmr06 but I took the picture with the carbon cap because it though it looked nice. Bling bling buddy Sent from my iPhone using Tapatalk 1 Quote Share this post Link to post Share on other sites
tranceparent 4 Posted July 11, 2018 Jagerwerks does great slide work as does Loki Tactical. Prefab though I'd say Zev, Southwest, L2D. Barrel/Comp: Primary Machine stealth comp, Agency barrel/comp, Texas Black Rifle Co, Mayhem Syndicate, Black List, Faxon... too many to name really. Barrel is a barrel in my opinion, some just have a bigger bling factor than others. Triggers: Agency, Apex, Overwatch, Tactical Trigger/Kineti-Tech which is what I am currently using. 2 Quote Share this post Link to post Share on other sites
shooter28 153 Posted July 11, 2018 Anyone try slides from zaffiri precision? They look pretty nice and the prices look awesome. https://www.zaffiriprecision.com/collections/glock Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted July 11, 2018 21 hours ago, tranceparent said: Jagerwerks does great slide work as does Loki Tactical. Prefab though I'd say Zev, Southwest, L2D. Barrel/Comp: Primary Machine stealth comp, Agency barrel/comp, Texas Black Rifle Co, Mayhem Syndicate, Black List, Faxon... too many to name really. Barrel is a barrel in my opinion, some just have a bigger bling factor than others. Triggers: Agency, Apex, Overwatch, Tactical Trigger/Kineti-Tech which is what I am currently using. You should introduce yourself. Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted July 13, 2018 On 7/6/2018 at 0:59 PM, High Exposure said: Don’t need to search for a deal. You can find stripped Gen 3 Glock 19 and Glock 17 frames for $70 at either Big Tex Outdoors or The Glock Store. +1 I took this advice. If you’re building from scratch do s G3 RTF frame. I just received one recently and love it a lot. Zev slide with RMR cut and suppressor sights on top. Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted August 11, 2018 She’s picking up her lower today. Gen 3 34 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted September 22, 2018 So far over watch trigger and Glock lpk. now comes slide time.. stuff jus keeps showing up here. I be like “ sooo, bout the slide “ she be like “ zip it!!!” Quote Share this post Link to post Share on other sites