Ff312 5 Posted August 26, 2018 P365 Factory night sights. Not sure what your g43 has. 1 Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted August 27, 2018 1 hour ago, Ff312 said: P365 Factory night sights. Not sure what your g43 has. There is cost too. The Glock is more expensive. Actually, the Glock 43 is one of the more expensive single stack 9mms on the market. Hell, it's a C-Note more than a M&P Shield and the Shield is an all around better gun. Quote Share this post Link to post Share on other sites
mustang69 503 Posted April 22, 2019 Just picked up my P365 today as my new EDC. I compared it to the G43 and the Taurus G2C (because they were all next to each other in the gun case). Side by side, the biggest difference between the G43 and the Sig was the sights. Haven't shot it yet but those Sign X-ray sights just work well with my old eyes. I'll admit I'm not a Glock fan. Had a G43 in NJ and sold it since it wasn't practical there. The Sig just seems "right" and the sights made the difference for me. As for the Taurus? While I was a bit surprised at the price I just couldn't get past the potential reliability issues. I've been carrying a Kimber micro9 that will be replaced by the Sig P365. Quote Share this post Link to post Share on other sites
sgtdave4321 36 Posted April 23, 2019 My P365 has worked out well. I have about 500 rounds through it with no issues. My front sight dimmed out. I called SIG and sent the slide in. The replaced the sight and had it back to me in about 8 days. 1 Quote Share this post Link to post Share on other sites
bhunted 887 Posted April 24, 2019 On 4/22/2019 at 9:12 PM, sgtdave4321 said: My P365 has worked out well. I have about 500 rounds through it with no issues. My front sight dimmed out. I called SIG and sent the slide in. The replaced the sight and had it back to me in about 8 days. Was just looking at one yesterday as well and am considering it. Right now my edc is either my P938 or my VP9SK.... I watched the videos and wondered about the primer drag. I've heard online that a lot of small guns have that problem. I dunno about that. My SK, P938, etc. I never recalled any drag on those primers. But I will check again. There are companies offering steel pins in lieu of the factory mim... I think that will only keep the pin from fracturing. We shall see. May have to go out and get one today. Quote Share this post Link to post Share on other sites
bhunted 887 Posted April 24, 2019 Picked up a brand new March 2019 vintage P365... , ammo, extra 12 round mag and holster... Cleaned it, reversed the mag release and reassembled. Got to say, these mags are the biggest bitches to load even with a loader. Especially the 12 round. None of my pistols are that hard, not even my p938.... Range asap, maybe tamale... Quote Share this post Link to post Share on other sites
PK90 3,569 Posted April 24, 2019 New Sig Sauer P365 NRA Edition 1 Quote Share this post Link to post Share on other sites
bhunted 887 Posted April 24, 2019 Afraid to ask price... nice. Quote Share this post Link to post Share on other sites
PK90 3,569 Posted April 24, 2019 Just now, bhunted said: Afraid to ask price... nice. $50 more Quote Share this post Link to post Share on other sites
bhunted 887 Posted April 24, 2019 Not bad.... figures... paid only $519 for mine.... worth it for the 12 rounder. paid 49 for that bad boy. Quote Share this post Link to post Share on other sites
mustang69 503 Posted April 24, 2019 56 minutes ago, bhunted said: Afraid to ask price... nice. Google-fu shows retail to be $599, available only through that distributor. Doesn't sound like a bad deal since it includes the 12-rounder. 1 Quote Share this post Link to post Share on other sites
Krdshrk 3,871 Posted April 24, 2019 1 hour ago, PK90 said: New Sig Sauer P365 NRA Edition Doodoo brown edition 1 Quote Share this post Link to post Share on other sites
bhunted 887 Posted April 24, 2019 59 minutes ago, mustang69 said: Google-fu shows retail to be $599, available only through that distributor. Doesn't sound like a bad deal since it includes the 12-rounder. Thats bs. There were others out there offering email notification when they arrive in stock. 41 minutes ago, Krdshrk said: Doodoo brown edition Baby poop for sure. Lol Quote Share this post Link to post Share on other sites
david8613 69 Posted April 29, 2019 Picking up a sig sauer p365 this Saturday, I am so excited. She has a born on date of January 24, 2019. I am glad to hear most of the issues sig had at launch have been resolved. Are there any new issues I have to worry about? Anything I should I check on her before I head to the range to test? Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted April 29, 2019 1 hour ago, david8613 said: Are there any new issues have to worry about? Anything I should I check on her before I head to range to test? Yes Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted April 29, 2019 3 hours ago, david8613 said: Picking up a sig sauer p365 Saturday, so excited. She has a born on date January 24, 2019. Glad to hear most of issues they had at launch have been solved. Are there any new issues have to worry about? Anything I should I check on her before I head to range to test? Good choice! Quote Share this post Link to post Share on other sites
SW9racer 262 Posted April 29, 2019 5 hours ago, david8613 said: Picking up a sig sauer p365 this Saturday, I am so excited. She has a born on date of January 24, 2019. I am glad to hear most of the issues sig had at launch have been resolved. Are there any new issues I have to worry about? Anything I should I check on her before I head to the range to test? Mine also has a 1/19 born date. Just hit the 1,000 round count with no issues at all. Quote Share this post Link to post Share on other sites
bhunted 887 Posted April 30, 2019 20 hours ago, david8613 said: Picking up a sig sauer p365 this Saturday, I am so excited. She has a born on date of January 24, 2019. I am glad to hear most of the issues sig had at launch have been resolved. Are there any new issues I have to worry about? Anything I should I check on her before I head to the range to test? You're good to go. All fixed except primer drag which they won't fix. Quote Share this post Link to post Share on other sites
david8613 69 Posted May 1, 2019 I saw this, pretty cool. [NRA 2019] Gray Guns New P365 Compensator -The Firearm Blog https://www.thefirearmblog.com/blog/2019/04/30/nra-2019-gray-guns-new-p365-compensator/ Quote Share this post Link to post Share on other sites
SJG 253 Posted May 1, 2019 The P365 is designed as a EDC gun. Putting a compensator on an EDC gun makes no sense. If you want a comp on a gun you really need to go with a compact size pistol as opposed to subcompact. 1 1 Quote Share this post Link to post Share on other sites
Krdshrk 3,871 Posted May 1, 2019 3 hours ago, david8613 said: I saw this, pretty cool. [NRA 2019] Gray Guns New P365 Compensator -The Firearm Blog https://www.thefirearmblog.com/blog/2019/04/30/nra-2019-gray-guns-new-p365-compensator/ 1 Quote Share this post Link to post Share on other sites
david8613 69 Posted May 1, 2019 I'm not into that, at all. I like my stuff bone stock. I just thought it looked cool, all the laser work and stuff, it's crazy how much people can customize things these days. Quote Share this post Link to post Share on other sites
JC_68Westy 1,024 Posted May 1, 2019 I have to say the only thing I don't like about my P365 is the rail. I do not put anything on a gun this compact. Quote Share this post Link to post Share on other sites
bhunted 887 Posted May 1, 2019 4 hours ago, JC_68Westy said: I have to say the only thing I don't like about my P365 is the rail. I do not put anything on a gun this compact. That's hardly a rail. Had to look at mine to even realize it was there. They do offer lights and lasers for it though. Quote Share this post Link to post Share on other sites
david8613 69 Posted May 4, 2019 She is home! I like it alot, for being so tiny she feels nice in hand. 1 1 Quote Share this post Link to post Share on other sites