-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By RetNJ47
Selling off some ammo. Message me with any questions.
Tried to price everything lower than what I could find on ammoseek.
SOLD-ATS(TargetSportsUsa brand I think) 5.56 M193
CCI 22 Short $8/box(100)
SOLD - CCI Blazer Brick
Winchester 7.62x51 $15/box (20)
Aguila Minishell Slugs $20/box(20)
Federal Premium 308 SMK $25/box(20)
Federal Berger OTM 6.5 Creedmoor $25
Hornady Precision Hunter 6.5 CM $30/box(20)
277 Fury(Sig Sauer) Accubond Hybrid Ammo $40/box (is/was? new military 6.8)
Tulammo 7.62x39 in 50 cal ammo can 1000 rounds $550
All ammo stored in humidity controlled environment either in ammo cans or larger sealed box with dessicant packets inside.
Once again, I researched prices on ammoseek if I’m off on pricing please message and let me know or message me an offer.
Located in Toms River area would prefer to meet at either Shoreshot or Weshoot.
Thanks for reading!
Also have all this stuff for sale message me if interested.
SOLD: Unity Riser FDE
SOLD: 5.56 Warcomp
SOLD: Black Raptor CH(1 left)
SOLD: Vortex Sparc Red Dot
SOLD: Unity Micro T2 Mount
SOLD: Surefire 7.62 Warcomp
A lot of people asking what is in this last picture. I can take better pictures and post here or a new thread if everyone wants that or an list. And just send a message to request close up pictures for serialized items if you wanna check. I assure you everything is legit but I know I’m new so my feelings wont be hurt.
-
By RetNJ47
Great start for people looking to get into reloading. $500. (FIRM)
RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
Rockchucker Supreme IV Single Stage Press
https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
Inline Fab Automatic Case Ejector System
https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
Inline Fab Universal double component tray system.
https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
RCBS
Uniflow Powder Drop
https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
M500 Mechanical Scale
https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
Powder Trickler
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
Universal Case Loading Block
https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
Hand Priming Tool for Small and Large Primers
https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
Additional press add ons:
(NIB) Advanced Powder Stand
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
(NIB) RCBS Auto Prime System
https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
Hornady impact bullet puller.
Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
-
By RetNJ47
Decided to sell again.
Very light use shot less than 50 rounds.
Zastava ZPAP M70(Tacticool Version) Serbian AK-47 with UTG QD optics mount with Vortex Sparc AR red dot.
1x PMAG 10/30 round from the factory.
5x Zastava 10/30 round mag blocked magazines.
Single point sling- Unknown manufacturer.
Asking $1250 OBO, Located in Toms River and meetup at FFL for transfer would prefer to be Shoreshot or Weshoot.
Also have 1000+ Tulammo Steel Case 7.62x39 in 50 Cal ammo can I can include for extra $$(no idea on price they are all over the place and crazy). Stored in can with dessicant and cardboard since purchase. Have the original box but it has a slight tear in the corner.
First to post “I’ll take it” gets it.
-
By RetNJ47
Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
Full list of modifications:
-Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
-SilencerCo Muzzle Brake
-SDTA 6” Blast Shield
-SBA3 Brace (Black or possibly FDE available)
-Magpul Gen 2 BUIS and Vertical Foregrip
-CMMG Stainless Gas Tube
$1550
Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
Still have stock barrel also if interested.
**Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.
-
By dysman78
Prior sale fell through. relisting -
I have 500 rounds of LAX Ammunition Reman 165gr RNFP and 500 rounds of LAX Ammunition Reman 180GR RNFP in factory boxes (not loose) for a total of 1000 rounds. Willing to split up and sell in 500 rds if necessary.
$135 for 500 rounds $260 for all 1000 rounds
This ammo has been properly stored and purchased in late 2022. Been using LAX Ammo for years for range ammo and never had any issues.
First person to say i'll take it gets it.
Live in Essex County. Willing to travel reasonable distance if necessary or meet up at local range (Gun for Hire, RTSP etc.)
PM me with any questions
-
-
Posts
-
In 50 years of living in NJ I've never experienced any attempt to inspect the interior of the home, and only one definite inspection of the exterior for an announced reassessment of all properties and that was a drive by. About 9 years of that was living in an apartment, but still, uncommon. Every place I lived had either a finished attic, basement, or both. But they were also included in the habitable square footage on the taxes when we got there.
-
27.00 and change in tolls to drive down the shore from Rutherford, 47.00 in tolls to go out to Long island to visit dying relatives. Now I read they are going to raise the fees in the DMV. Murphy lied just to get elected when he said that seniors will get a significant tax break with his StayNJ" program to stop us from leaving. Keep voting for democrats...this is what you get. Tax and spend is all they know. Never cut anything. This state sucks.
-
I get the added benefit that since I have a TSP rather than a true 401(k) they tax my retirement too. Yaaaay!
-
By diamondd817 · Posted
PX4 Full Size 9mm Type G. Upgrades include: - Type G Stealth/Low Pro Levers and Slide Release - Truglo Tritium Pro Sights, White Outline Front Sight - Beretta Competition Trigger Group - LTT Optimized Trigger Bar - PX4 D Spring All parts professionally installed by gunsmith. Pistol has 400rds through it. All original parts (trigger group, trigger bar, Type F levers, sights) are included in sale. Original Beretta case and all contents included in sale. 3-10rd mags (these are the original mags that came with it). Pistol is in Excellent condition, there are a couple minor smudges on the lower part of the slide near the frame which I guess is from the sight vise. If I didn't point them out you wouldn't even notice. Trigger is super sweet, especially the SA Reset. Between the gun, parts, and gunsmith labor I have about $1200 into it. $800 Sale is Cash Only. I'm in Whippany near Morristown. I will travel within a reasonable distance to meet at your preferred FFL to do the transfer. Buyer pays transfer fees. -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-