myhatinthering 462 Posted November 24, 2018 Took my new sig out to the range for some shooting and although I love the feel and accuracy of this handgun, experienced 8 stovepipes in 300 rounds with 5 in the first 100, 2 in next 100 and 1 in the next 100. Upon receiving it, I broke it down and inspected but did not lube it ( I never do this to new guns as I run them like this to wear into each part faster upon break in) and have yet to experience this many in any new semi auto handgun I've ever owned. I'm breaking it down tonight, will clean, lube, inspect etc and bring her back out on Sunday. Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted November 24, 2018 I clean and lube before firing. The preservatives used in the metals can be sticky. Nonetheless this seems a bit odd. Quote Share this post Link to post Share on other sites
myhatinthering 462 Posted November 24, 2018 agree, it's high but perhaps the sig is just different in this regard just stripped her down,cleaned and lubed it real nice and worked the action incessantly while watching Ozark. We'll see on Sunday and I'll report back Quote Share this post Link to post Share on other sites
Maksim 1,504 Posted November 24, 2018 What sort of issues were you having? Not cycling completely? What kind of ammo? Weak ammo + tight springs? I recall H&K somewhere recommended, at least for their guns, to run +p ammo the first few hundred rounds, or at the very least heavier grain. Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 24, 2018 Over 2k and zero issues ( I pre cleaned mine) zero issues Quote Share this post Link to post Share on other sites
myhatinthering 462 Posted November 24, 2018 42 minutes ago, Maksim said: What sort of issues were you having? Not cycling completely? What kind of ammo? Weak ammo + tight springs? I recall H&K somewhere recommended, at least for their guns, to run +p ammo the first few hundred rounds, or at the very least heavier grain. just stovepipes and one failure to eject. I've had 1 or 2 of these issues on other new semis but not like this. I used blazer 115gr fmj. Took the whole thing apart, cleaned, lubed and worked the action quite a bit. We'll see this weekend Quote Share this post Link to post Share on other sites
myhatinthering 462 Posted November 24, 2018 29 minutes ago, Zeke said: Over 2k and zero issues ( I pre cleaned mine) zero issues gotta say however, love the feel and accuracy of this handgun. The recoil seems negligible and love how it lines right up for the next shot. big fan and thinking I've just got one that has that first 500 rounds of needed break-in that sometimes occurs Quote Share this post Link to post Share on other sites
Maksim 1,504 Posted November 24, 2018 11 minutes ago, myhatinthering said: just stovepipes and one failure to eject. I've had 1 or 2 of these issues on other new semis but not like this. I used blazer 115gr fmj. Took the whole thing apart, cleaned, lubed and worked the action quite a bit. We'll see this weekend There is the issue. Was it Blazer or Blazer brass? Blazer bimetal/aluminum/non-brass ammo, particular 115 gr, when I chronoed it, was quite a bit weaker... and the case did not seal as much, causing issues. Shoot some other brass cased ammo and should have no issues with the gun. =) Quote Share this post Link to post Share on other sites
myhatinthering 462 Posted November 24, 2018 5 minutes ago, Maksim said: There is the issue. Was it Blazer or Blazer brass? Blazer bimetal/aluminum/non-brass ammo, particular 115 gr, when I chronoed it, was quite a bit weaker... and the case did not seal as much, causing issues. Shoot some other brass cased ammo and should have no issues with the gun. =) brass but to be honest, all my firearms go through every type of ammo and if they can't cycle reliably, they go Quote Share this post Link to post Share on other sites
GlennS87 65 Posted November 24, 2018 I also have about 2000 rounds through mine and have only had 2 ftf's. I did clean lube as a bunch of YouTube's suggested you would have issues if you didn't. 2 Quote Share this post Link to post Share on other sites
myhatinthering 462 Posted November 25, 2018 Happy to report all is well. 1 mag was not seating properly as there was something stuck behind the lip preventing it from functioning properly. Did not notice it when I took it apart to clean it inspect it move it after the other day. Ironically I noticed it after using the other magazine which was sitting perfectly. Went through 200 rounds of 124 grain Aguila, 200 rounds of Blazer 115 grain, 200 rounds of wolf Steel nothing wrong, function flawlessly 1 Quote Share this post Link to post Share on other sites
myhatinthering 462 Posted November 25, 2018 I will say that I really like this handgun. It lines up naturally when you point to shoot, there's almost no recoil impulse and the reset is fine on the trigger. Very comfortable to shoot 1 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 25, 2018 25 minutes ago, myhatinthering said: I will say that I really like this handgun. It lines up naturally when you point to shoot, there's almost no recoil impulse and the reset is fine on the trigger. Very comfortable to shoot It’s awesomeness! Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 25, 2018 6 hours ago, myhatinthering said: Happy to report all is well. 1 mag was not seating properly as there was something stuck behind the lip preventing it from functioning properly. Did not notice it when I took it apart to clean it inspect it move it after the other day. Ironically I noticed it after using the other magazine which was sitting perfectly. Went through 200 rounds of 124 grain Aguila, 200 rounds of Blazer 115 grain, 200 rounds of wolf Steel nothing wrong, function flawlessly Pro tip.. tag your mags.. if you are getting issues with any gun it’s easy to eliminate mags. 1 Quote Share this post Link to post Share on other sites
myhatinthering 462 Posted November 25, 2018 26 minutes ago, Zeke said: Pro tip.. tag your mags.. if you are getting issues with any gun it’s easy to eliminate mags. usually look at the mags first but there was a piece of plastic under the guide, oddest thing I've ever seen in my life. Never once saw this on any magazine in my life. Just a stupid 1 in a million thing. love the handgun though, just love it. 1 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 25, 2018 24 minutes ago, myhatinthering said: usually look at the mags first but there was a piece of plastic under the guide, oddest thing I've ever seen in my life. Never once saw this on any magazine in my life. Just a stupid 1 in a million thing. love the handgun though, just love it. Me also 1 Quote Share this post Link to post Share on other sites
NJSigfan 218 Posted November 25, 2018 Reading this post has me more excited to get mine. The count down has begun. 2 Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted November 25, 2018 On 11/23/2018 at 8:09 PM, High Exposure said: We get it, you're jealous. Enough 1 Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 25, 2018 32 minutes ago, NJSigfan said: Reading this post has me more excited to get mine. The count down has begun. Do it! Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 26, 2018 45 minutes ago, Ray Ray said: We get it, you're jealous. Enough He is! It’s so transparent Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 26, 2018 I’m hoping since it’s military newest mags will start becoming cheaper and abundant.. problem with early adoption. 1 Quote Share this post Link to post Share on other sites
Screwball 483 Posted November 26, 2018 I’m hoping since it’s military newest mags will start becoming cheaper and abundant.. problem with early adoption.They using SIG magazines? Or is it going to be a Checkmate like learning curve? Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 26, 2018 Sig is having a cyber Monday sale! Although @Mrs.Zeke found them cheaper on eBay... need to start doing steel comps but this court is killing me morally Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted November 26, 2018 4 hours ago, Zeke said: Sig is having a cyber Monday sale! Although @Mrs.Zeke found them cheaper on eBay... need to start doing steel comps but this court is killing me morally Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 26, 2018 8 minutes ago, Rob0115 said: Seriously bro! thats so played out 1 Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted November 26, 2018 19 minutes ago, Zeke said: Seriously bro! thats so played out There’s a good lesson to learned there. Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted November 26, 2018 26 minutes ago, Rob0115 said: There’s a good lesson to learned there. No! No! No! Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted November 26, 2018 1 hour ago, Rob0115 said: Sorry, me and Alonzo disagree. Quote Share this post Link to post Share on other sites
Rob0115 1,105 Posted November 27, 2018 1 hour ago, Ray Ray said: Sorry, me and Alonzo disagree. Love the movie but the 4506? Quote Share this post Link to post Share on other sites