Jump to content
shooter28

Poly80 Build

Recommended Posts

Now that there is something pretty to look at, here's the Poly80 G19 build Ive been working on. 

Zaffiri slide with RMR cut

SLR magwell

All internals are OEM Glock. Trigger came as part of the kit but will be replaced 

46238310552_de71836e86_c.jpg

46238303882_1232ee8498_c.jpg

Next up on the list is:

Zaffiri TiN threaded barrel

Slide completion kit

Ameriglo sights

Trijicon RMR

Trigger- deciding between Overwatch and Apex kits. Never messed with any aftermarket Glock trigger before so any input is welcome. 

I put these on my Xmas list so hopefully Santa is watching/listening......

  • Like 1

Share this post


Link to post
Share on other sites
38 minutes ago, Ray Ray said:

I am considering a 19 lower, which is the actual serial number yes?

I do not want a 80% lower though, I would prefer a factory built 100% lower.

Thanks for sharing

Big Tex outdoor is where Mrs got her 34 lower.

Share this post


Link to post
Share on other sites

KkxK7Ow.jpg

Here ya go Ray.

G17 frame on top

G19 frame on bottom

Both are Gen 3 stripped frames in what Glock calls OD Green.

I got them from Big Tex Outdoors for like $70 each.

For another $70 you can get a Glock LPK.

Ike is the man!

 

  • Like 2

Share this post


Link to post
Share on other sites
On 12/12/2018 at 2:57 PM, shooter28 said:

Now that there is something pretty to look at, here's the Poly80 G19 build Ive been working on. 

Zaffiri slide with RMR cut

SLR magwell

All internals are OEM Glock. Trigger came as part of the kit but will be replaced 

46238310552_de71836e86_c.jpg

46238303882_1232ee8498_c.jpg

Next up on the list is:

Zaffiri TiN threaded barrel

Slide completion kit

Ameriglo sights

Trijicon RMR

Trigger- deciding between Overwatch and Apex kits. Never messed with any aftermarket Glock trigger before so any input is welcome. 

I put these on my Xmas list so hopefully Santa is watching/listening......

I think my wife got the overwatch

  • Like 1

Share this post


Link to post
Share on other sites

I sincerely hope you are not finishing that lower within the confines of NJ.  I had two of them and replaced them with factory frames from Big Texas Outdoors, @High Exposure recommendation. 

 

Just ordered a G3 34 lower cause I have a Zev slide that I can finish off now.

  • Like 3

Share this post


Link to post
Share on other sites
5 minutes ago, Rob0115 said:

I sincerely hope you are not finishing that lower within the confines of NJ.  I had two of them and replaced them with factory frames from Big Texas Outdoors, @High Exposure recommendation. 

Another big Tex outdoor?

@High Exposure has to be getting a kickback 

  • Like 1

Share this post


Link to post
Share on other sites
3 minutes ago, Zeke said:

Another big Tex outdoor?

@High Exposure has to be getting a kickback 

I bought a 17 and 19 RTF frame when they had them for 79 bucks each stripped.  I just ordered the 34 complete (no stripped option) because I had a spare Zev upper for it that I wanted to use. 

  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, Rob0115 said:

I sincerely hope you are not finishing that lower within the confines of NJ.  I had two of them and replaced them with factory frames from Big Texas Outdoors, @High Exposure recommendation. 

 

Just ordered a G3 34 upper cause I have a Zev slide that I can finish off now.

Nope the 80% frame was cut and drilled for completion in a friendly state.  

  • Like 2

Share this post


Link to post
Share on other sites

Update: 

Built the slide up so I now have a functioning weapon. Still need a iron sights and a red dot. Trigger will be replaced at some point as well.

46561592061_03faa8b261_c.jpg

46561592101_dc589baab3_c.jpg

The only issue is the extractor. I have a billet extracts but it wouldn't seat all the way in the channel properly. Gotta figure out whats going on there. A factory extractor is in its place for now. 

Share this post


Link to post
Share on other sites
On 12/14/2018 at 7:50 AM, Ray Ray said:

Does Lone Wolf make a G19 lower?

The LW timber wolf frames I’ve seen are hit or miss.  Get a factory glock frame for less money and no issues.   They have 19x frames now too   

 

https://www.bigtexoutdoors.com/product/glock-oem-frames-stripped-complete-g17-g19/

  • Like 1

Share this post


Link to post
Share on other sites

Got some more parts installed. Now that I have sights, Im hoping I get a chance to shoot it this weekend.

Ameriglo Suppressor height sights. Single orange/green dot up front, blacked out rear. 

Tactical Pontoon Trigger- this thing is awesome. Ranger Proof trigger shoe, adjustable over travel, Ghost edge 3.5Lb connector, polished trigger bar. There is basically no uptake in the trigger. I might see if I can tighten it up a bit more. Very short, crisp reset as well. 

32071113437_213b4679db_b.jpg

47012347211_797a041064_b.jpg

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...

Important Information