rtquig 45 Posted March 17, 2019 14 minutes ago, SIGMan Freud said: Yes, those of the SAAMI rim depth ranges for the chamber. Just wondering what S&W considers their spec. I measured my bolt depth and got 0.041" (with my cheap Chinese digital calipers). Do the gauge instructions tell you to just eyeball it or maybe run a credit card over it to make sure it's flush or lower (that is, doesn't get hung up passing from bolt to gauge)? S&W does not mention the size, the send the gauge taped to a post card size color directions like the one on their web site. One picture shows it flush and days correct. The next picture shows it above the face of the bolt and says incorrect. The gauge fits perfect in the bolt so there is no mistake. Either it is above, which is no good or flush or slightly below which is correct. No credit card is mentioned to test. 1 Quote Share this post Link to post Share on other sites
rtquig 45 Posted March 17, 2019 Taking out my gauges, I would say the gauge they sent is 0.051, but 0.053 was also very close. It was hard to get an accurate definite answerer. I would say 0.051 would be okay. 1 Quote Share this post Link to post Share on other sites
SIGMan Freud 93 Posted March 17, 2019 30 minutes ago, rtquig said: Taking out my gauges, I would say the gauge they sent is 0.51, but 0.53 was also very close. It was hard to get an accurate definite answerer. I would say 0.51 would be okay. Interesting, and that makes sense that they went with a thickness closest to the upper end of the 0.043-0.051" range. I haven't gotten my gauge yet, bit I'm fairly certain my bolt is slightly shallow. Mine is the Performance Center model and it was made in Nov of 2018. I measured mine multiple times and keep coming up with 0.041" I wonder what depth causes the autofire? I saw one guy on the S&W forum that claimed his depth was 0.036" and he did not have any issues, maybe because of his ammo? I think the SAAMI spec for the cartridge rim is 0.036" to 0.043". Quote Share this post Link to post Share on other sites
GramGun79 226 Posted March 22, 2019 Still have not received my gauges. How long did it take for some of you to get them? Quote Share this post Link to post Share on other sites
Maksim 1,504 Posted March 22, 2019 Ordered it same day, have not gotten mine yet either. Quote Share this post Link to post Share on other sites
SIGMan Freud 93 Posted March 22, 2019 I ordered mine on 3/11 and it came in the mail 3/21, so 10 days. I measured the gauge with two sets of calipers and the thickness is 0.035”. The gauge did not protrude above the bolt but was slightly below, which is consistent with my prior measurement of the recess depth for my gun being 0.041”. Quote Share this post Link to post Share on other sites
Lakota 342 Posted March 22, 2019 I got my gauge yesterday ... checked it and my bolt is fine. Quote Share this post Link to post Share on other sites
oldguysrule649 397 Posted March 22, 2019 Received my guage today in the mail. Just checked my bolt and it was ok. (I purchased my 15/22 in April 2014.) Quote Share this post Link to post Share on other sites
njpilot 671 Posted March 23, 2019 My gauge arrived today, so everyone who ordered it right away should get it any day now. Quote Share this post Link to post Share on other sites
Kawi7 52 Posted March 23, 2019 I received my gauge 11 days after ordering. The bolt was in spec.. The rifle was purchased in 2017.. Quote Share this post Link to post Share on other sites
remixer 1,645 Posted March 29, 2019 Has anyone gotten the tool yet? Quote Share this post Link to post Share on other sites
JT Custom Guns 956 Posted March 29, 2019 We got ours about a week ago.......... Quote Share this post Link to post Share on other sites
remixer 1,645 Posted April 4, 2019 We did get our Gauge Quote Share this post Link to post Share on other sites
Heronimo42 9 Posted May 8, 2019 Ordered mine on 3/28, still haven't received it. S&W customer service said the following- I am sorry but we don’t have visibility of these orders so there is no way for us to check status of them. Please allow 15-20 business days for delivery of the bolt gauge. Thank You for choosing Smith & Wesson / Thompson Center products. Have a great day. Smith&Wesson values its customers and we are happy to have served you today. Please do not hesitate to contact us should you require further assistance. Quote Share this post Link to post Share on other sites
XDJohnTact 49 Posted May 8, 2019 I was asked by S&W for my serial number and sent it in. Never heard from them again so I guess mine is OK? Quote Share this post Link to post Share on other sites
PK90 3,570 Posted May 8, 2019 On 3/22/2019 at 3:32 AM, SIGMan Freud said: ... I measured the gauge with two sets of calipers and the thickness is 0.035”.... AND On 3/17/2019 at 9:27 AM, rtquig said: Taking out my gauges, I would say the gauge they sent is 0.051, but 0.053 was also very close. It was hard to get an accurate definite answerer. I would say 0.051 would be okay. Do we have a true reading of the gauge thickness? Quote Share this post Link to post Share on other sites
JT Custom Guns 956 Posted May 8, 2019 5 minutes ago, PK90 said: AND Do we have a true reading of the gauge thickness? Mine measures 0.0350 exactly! Quote Share this post Link to post Share on other sites
Heronimo42 9 Posted June 7, 2019 I spoke with S&W customer service on May 16. I was told they had to change suppliers due to material shortages. They had me reorder another gauge then and I was told to expect it between 10-14 days from new supplier. Still haven't received it. Anyone have one they can mail to me? I'll cover shipping costs via paypal or zelle pay if interested. Thanks. Quote Share this post Link to post Share on other sites
PK90 3,570 Posted June 7, 2019 3 hours ago, Heronimo42 said: I spoke with S&W customer service on May 16. I was told they had to change suppliers due to material shortages. They had me reorder another gauge then and I was told to expect it between 10-14 days from new supplier. Still haven't received it. Anyone have one they can mail to me? I'll cover shipping costs via paypal or zelle pay if interested. Thanks. I have one that I can send you. PM me your address. No charge. Quote Share this post Link to post Share on other sites
XDJohnTact 49 Posted June 8, 2019 I contacted them months ago and sent them my serial number as requested. Never heard back so I guess mine was early enough to not be a problem? Brought it to the shoot last week and it cycles just fine. Fun to shoot at 25 yards. Quote Share this post Link to post Share on other sites
Maksim 1,504 Posted June 9, 2019 On 5/8/2019 at 8:26 AM, Heronimo42 said: Ordered mine on 3/28, still haven't received it. S&W customer service said the following- I am sorry but we don’t have visibility of these orders so there is no way for us to check status of them. Please allow 15-20 business days for delivery of the bolt gauge. Thank You for choosing Smith & Wesson / Thompson Center products. Have a great day. Smith&Wesson values its customers and we are happy to have served you today. Please do not hesitate to contact us should you require further assistance. On 5/8/2019 at 11:00 AM, XDJohnTact said: I was asked by S&W for my serial number and sent it in. Never heard from them again so I guess mine is OK? Have not gotten mine either but it is a very early model. Quote Share this post Link to post Share on other sites
remixer 1,645 Posted June 11, 2019 I got my second one today. LOL not even sure why.... unless they are just shipping those to dealers regardless if we ordered them already Quote Share this post Link to post Share on other sites
Heronimo42 9 Posted June 12, 2019 I received a gauge from PK90, who sent it to me graciously. I checked mine out and good to go. If anyone needs a gauge, please pm me and I will mail this one to you to check out. Quote Share this post Link to post Share on other sites
Zeke 5,504 Posted June 12, 2019 40 minutes ago, Heronimo42 said: I received a gauge from PK90, who sent it to me graciously. I checked mine out and good to go. If anyone needs a gauge, please pm me and I will mail this one to you to check out. @PK90 is da man! 1 Quote Share this post Link to post Share on other sites
XDJohnTact 49 Posted June 12, 2019 2 hours ago, Heronimo42 said: I received a gauge from PK90, who sent it to me graciously. I checked mine out and good to go. If anyone needs a gauge, please pm me and I will mail this one to you to check out. PM sent! Quote Share this post Link to post Share on other sites