Milling slide for rmr footprint.

[david8613 69]

Milling slide for rmr footprint. What places do you guys recommend. I contacted tier 1 defense waiting for response.

[SJG 253]

Before you go the pistol optic route strongly suggest you find someone with an optic on their pistol and see if you really want to go that route. It is not a panacea.

 

[SgtToadette 59]

19 hours ago, SJG said:

Before you go the pistol optic route strongly suggest you find someone with an optic on their pistol and see if you really want to go that route. It is not a panacea.

 

Nah don't listen to him.

[SW9racer 262]

I used DP Custom Works at https://www.dpcustomworksllc.com/   For work done on my S&W MP9Pro. Also had my slide custom cut as well. 

 

[david8613 69]

Lol, I'm the type I cant just try something once or twice. I have get it use it for awhile and if I like it I'll keep it, if I dont like it I will sell it, no worries. Definitely going optics route, I was gonna do an optics ready gun but this forum convincing me I should go milled. What's the going price to do this type of work? I have to  send just the slide, not the whole gun correct?

[david8613 69]

I'm looking at jagerworks. I see they have a. Option to iron sights in front of red dot or in back of red dot. What is better and why?

[SW9racer 262]

I feel the iron sites block the optic, so I opted not to have a rear site groove cut, and instead have a slide racker.  I have a nice open field of view. I have a buis on my ar, but they are always folded down. I turned my M&P into a race gun for open division, and for range use. I have an extra battery, but they last hundreds of hours. If my RMR died I would be too depressed to continue, and just switch to another pistol for the rest of the match. 

[david8613 69]

My cz p10c suppressor ready came in, gotta pick it up. I gotta contact who ever is gonna do my milling, I need to find out if I can keep the suppressor height sights. I noticed the rear sight has a ramp taking up space on the slide, might have to get it changed, not sure. Rear Sight Looks like this

[shooter28 153]

Jagerworks, Primary Machine, Agency Arms, ATEi, Cajun Gunworks, and Southwest Precision all do slide milling. 

Have the rear sight cut behind the optic. That way if you decide you dont like the optic, you can take it off and have the normal sight radius on the irons

[david8613 69]

So I wont be able to keep the sight that on it now? The rear sight would have to be moved backwards or keep it there a put holosun 507c sight a little further foward? Not sure...

[shooter28 153]

From what I have seen, no. 

They will mill the slot for the RMR right where the current cut for the rear sight is now. Then they will mill a separate spot for the rear sight. Up to you if you want infront or behind. My vote would be behind

[Down South 9]

I'm in Free Florida and would recommend looking up Shark Coast Tactical , they do awesome work.

Plus they have a cool ass Logo . 

[david8613 69]

http://ncengravers.com/czproducts/p10-opticmiling

I found a pic with an optic on the slide with cz OEM suppressor height sights. It looks to me to be very close to the ejection port. Is this safe to do? I see other cz p10c slides milled with a new dovetail and a different rear suppressor height sight to move the red dot farther back on the slide. See the difference in the 2 pics below. What do you think?

[blksheep 466]

David,

     In the bottom pic the recut for a normal rear sight.  Your best bet is to actually talk to the guys you don't for a living. 

L&M Precision in North Carolina...email or call Mark

DP Custom works...email or call Doug. 

They are more than happy to talk shop.

[Zeke 5,504]

On 6/8/2019 at 2:07 PM, david8613 said:

http://ncengravers.com/czproducts/p10-opticmiling

I found a pic with an optic on the slide with cz OEM suppressor height sights. It looks to me to be very close to the ejection port. Is this safe to do? I see other cz p10c slides milled with a new dovetail and a different rear suppressor height sight to move the red dot farther back on the slide. See the difference in the 2 pics below. What do you think?

The top one just looks wrong. Same with rear sights in front of an rds. I’d go with the donut.

[david8613 69]

I agree OEM suppressor hight sights do look awkward. I was checking the pros and cons of the sight being in front of red dot or in back of red dot. I think there is alot to like with the sight in front, first it protects the red dot from damage if you rack it that way, second having the sight in front also keeps the red dot with a nice clean view of the glass nothing in the way that can confuse your eyes. 

[Shane45 807]

If your considering the new triji, sight in front could be an issue fyi.

[High Exposure 5,664]

My first milled slide I had the Irons in front of the RMR.

My second, I put the irons behind the RMR.

I discovered, it didn’t matter. They both work equally well.

YMMV

[Shane45 807]

I think the issue looks to be real estate. The way it overhangs is going to eat up space to put the irons in front of it I think.

 

[High Exposure 5,664]

16 minutes ago, Shane45 said:

I think the issue looks to be real estate. The way it overhangs is going to eat up space to put the irons in front of it I think.

 

Oh, agreed 100% Shane.

My response about irons was to David.

[Shane45 807]

Rgr that

[david8613 69]

Good stuff, looks like the that tube on the front trig is making the foot print much bigger, but I bet it helps with focus. I'll be running a holosun 507c. 

[CageFighter 236]

anyone in NJ mill slides?  Im looking to mount an optic and cut some grooves/holes in it. 

[david8613 69]

Cage fighter check out dpcustom they had a crazy sale going on, I'm getting an rmr/holosun optic cuts on 2 slides, a czp10c and an hk vp9, my total came to 120.00!!!

Sorry but I think the sale is over. 

https://www.dpcustomworksllc.com

[CageFighter 236]

just my luck.  

 

[High Exposure 5,664]

I took advantage of that sale as well - got in on Monday. I ordered the EDC package, nitride, and RMR cut. Cost waaaaay less than it should have.

Mailing my slide out tomorrow morning. Can’t wait to get it back.

Snagged a Holosun 407C for $189 from Brownells to go on it. 

Life is good.

[ChrisJM981 924]

I'm going to have my PPQ slide milled. Any recommendations on where to send it? 

[blksheep 466]

L&M Precision.  Mark does excellent work, one of the originals in the biz.

[ChrisJM981 924]

1 hour ago, blksheep said:

L&M Precision.  Mark does excellent work, one of the originals in the biz.

Thanks for the recommendation. 

The milling costs almost as much as the gun. I wonder why it's so much more for the PPQ. Ouch. 

[High Exposure 5,664]

I’ll second Mark and L&M. Great work.