Jump to content

Recommended Posts

Not sure if this is true, but heard from a friend I work with that the state is running low or out of pistol permits. 

He applied in Clark, and from what he told me they are usually fairly quick on their turn around.  He applied using the online system and after about a month he called just to check on his permits and they told him that everything was done but they were out of actual permits and were waiting on a delivery.

 

 

Share this post


Link to post
Share on other sites

I just saw a post on the Njguns sub reddit about something similar happening in Hoboken; he was informed they didn't have any permits. I didn't believe it at first and thought they were pulling a fast one over on the poster. For your friend to get the same response in Clark is probably not a coincidence. I didn't realize there is a limited amount. The cynic in me wonders if they are purposely withholding permits as a defacto form of control. 

Share this post


Link to post
Share on other sites
7 hours ago, dajonga said:

Misplace permits in a warehouse somewhere, stop printing new permits, blame it on an unnamed vendor and BINGO! Totalitarian handgun control.

Clever that Murphy.

It's the opposite of finding ballots in a warehouse. Oh look more votes for the progressive, under all these handgun permits.

  • Haha 1

Share this post


Link to post
Share on other sites

The law-abiding and peaceful Sheeple will just bend over to the unconstitutional and unjust tyranny.  

Share this post


Link to post
Share on other sites
2 hours ago, Ray Ray said:

I actually thought this thread was a joke.  Sadly, the joke is on us.  

 

1 hour ago, BobA said:

Yet another way to attack our guns without attacking our guns. 

 

1 hour ago, Underdog said:

The law-abiding and peaceful Sheeple will just bend over to the unconstitutional and unjust tyranny.  

The Sheeple will just accept this with all the other unconstitutional 2A laws stuffed up their butts without even a single whimper... It's what they normally do.

Just another example of removal of our 2A rights, piece by piece.

  • Agree 1

Share this post


Link to post
Share on other sites
Just now, Sniper said:

 

 

The Sheeple will just accept this with all the other unconstitutional 2A laws stuffed up their butts without even a single whimper... It's what they normally do.

Just another example of removal of our 2A rights, piece by piece.

Honestly, I think this is part of the turning point. 

Many people are already ignoring the recent attacks, now that they are prevented from buying, is going to get people up in arms. 

Keep in mind now the Ffls are impacted as they can’t sell guns to folks with no permits. 

Share this post


Link to post
Share on other sites
4 minutes ago, Maksim said:

Keep in mind now the Ffls are impacted as they can’t sell guns to folks with no permits. 

LEOs need permits for duty firearms too, this will get fixed ASAP.  

If they didn't need permits, then that's a different story. 

Share this post


Link to post
Share on other sites
1 minute ago, Ray Ray said:

LEOs need permits for duty firearms too, this will get fixed ASAP.  

If they didn't need permits, then that's a different story. 

Since when?

Share this post


Link to post
Share on other sites

I just left global pharmaceuticals R&D. We frequently needed to update forms for Federal and International regulatory reasons. FYI, turnaround time was about 5 business days. For NJ it take no longer than 2-3 days in my opinion. This assumes NJ really wants to get them quickly :)

Share this post


Link to post
Share on other sites
11 minutes ago, Ray Ray said:

LEOs need permits for duty firearms too, this will get fixed ASAP.  

If they didn't need permits, then that's a different story. 

I suspect the permits they have set aside for LEO's are magically intact.

The stacks they had for the rest are somehow missing...

Share this post


Link to post
Share on other sites
29 minutes ago, PK90 said:

Why can't the PD make copies, like dealers have to make copies of the 4473 when the government runs out?

Each permit has a unique "control number" stamped into it in red.  Copies would negate that security feature.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  •  

    alderfer921.jpg

  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Posts

    • I load a lot of light .38 loads for police revolver matches.   You named a bunch of excellent powders, but I've been slowly converting my target loads (.38, 9, .45) to use WST powder.  It burns so cleanly, especially compared to Bullseye, and it meters with amazing consistency. I've gone years without having to adjust the powder setting on the Dillon.  It just stays within 0.1, seemingly forever. My load data is consistent with that shown here:  https://www.bullseyeforum.net/t9231-wst-38-loads-for-hg-50-bullet and I crimp with a little less than 1/8" of the wadcutter exposed.  There isn't a crimp groove, but with such light loads it doesn't matter.   I like Hornady, Zero, and a few other bullets, but I use almost exclusively the 148 gr wadcutters from CNJ casting.  Lower cost, great quality, very fast shipping, and they are always in stock.   I favor CCI primers, but will use Winchester, and to be honest I'm not sure if I can tell the difference.   Federals are great, but harder to find, and since I don't have a problem with light strikes (a problem that can sometimes be solved with the 'softer' Federal primers) I don't bother looking for them.  I've read that magnum primers increase the variability of velocity--you'll see it in the standard deviation when you chrono a bunch of rounds.  I've not tested that myself, I just avoid magnum primers for target rounds.  It's not like the fast powders are hard to ignite. I use Starline brass, all from the same lot, for matches.  I'm on about the 7th reload of this batch, and I expect to keep using it for a good while yet.   I use mixed brass for practice, and it does pretty well also.  I do get some loads that bulge at the bottom of the seated wadcutters, and so can't fit into a match chamber but they almost always fit in another revolver, so they get used. These loads will consistently group under 3" from a sandbag rest at 25 yards.  I suspect they'd do better if I worked on my sandbag technique and put a scope on the gun.  
    • Selling my Harrington & RIchardson M1 Garand. All numbers matching but wood was reworked (as is obvious from the pictures). I believe it's from the Korea/Vietnam era but do not have much history behind it besides having bought it with a few other milsurp rifles at the same time. Rifling is in good shape as is the rifle overall. I know for a rifle like this pictures especially matter so please bear with my amateur skills. If you have any questions or would like better/more pictures of the rifle, feel free to reach out and I'll do my best. Willing to meet within 30-45 minutes of Burlington at your FFL or can go through mine. Obviously must have FID, permit, etc. as required by the state for an FFL to do a transfer. All FFL fees to be paid by buyer. The first to post "I'll take it" wins the sale. Asking $1500 or best reasonable offer.
    • Looking to sell a basic NJ compliant Smith & Wesson M&P 15 Sport II rifle in 5.56/.223 with, at best, 200 rounds down the rifle. Works beautifully and will include (1) 10 round magazine.  Willing to meet within 30-45 minutes of Burlington at your FFL or can go through mine. Obviously must have FID, permit, etc. as required by the state for an FFL to do a transfer. All FFL fees to be paid by buyer. The first to post "I'll take it" wins the sale. Asking $625 or best reasonable offer.
×
×
  • Create New...