Greenday 323 Posted December 3, 2019 Fired some 6.5 Creedmoor yesterday. Loaded it based on Sierra's manual. 2.810" C.O.A.L. Fresh Starline brass Hodgdon H4350 40gr (RCBS Charmaster, double checked on my Lee Safety Scale). Hodgdon says 38.8-41.5gr. Sierra says 39.2-41.9gr. Saw a lot of people having success between 41-41.5gr so I thought I'd back it off a grain. 142gr SMK Well, as you can see at 100 yards indoors, it proved accurate. But I have some questions about the brass and I've seen some ambiguous things online. 20191202_215417 - Unused brass, brand new. 20191202_215449 - Once fired, loaded as mentioned. 20191202_21439 - Primers of those three rounds. 20191202_215707 - Once fired American Eagle 120gr OTM So for the once fired, Starline brass, I see three lines all about the same distance. Is this from pressure? The primers look normal as pictured. I see no issues the rest of the cases. Read https://sierrabulletsblog.com/2015/08/12/reloading-101-case-diagnostics/ and It looks like example #5. It looks cosmetic and there's no bulge. Am I just imagining things and this isn't actually an issue at all? Just want to be thorough and check with other people experienced in reloading. Quote Share this post Link to post Share on other sites
CAL. .30 M1 2,101 Posted December 3, 2019 That's a very manicured thumb...mani pedi often? 1 Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 3, 2019 1 minute ago, USRifle30Cal said: That's a very manicured thumb...mani pedi often? Thank you. I have an obsession with clipping my nails short. 1 Quote Share this post Link to post Share on other sites
CAL. .30 M1 2,101 Posted December 3, 2019 Lol.... Do you have a saami case gauge for the caliber? Quote Share this post Link to post Share on other sites
raz-0 1,259 Posted December 3, 2019 *Sigh* I weep for your co-workers. I do. So you ask a question about primers and NEVER TELL US THE GODDAMNED PRIMERS YOU USED IN YOUR LOAD!!!! For fucks sake man, work with us here. Since it is starline with the SR it's small rifle. If you are shooting thinner primers like the remington 6 1/2 primers. Don't do that. If you don't have pinhole ruptures of the primer, you will at some point given 6.5 creedmore's pressure. They will blow out on hot .223 loads and 6.5 creedmore max pressure is 65k vs 55k for .223. Here's a web page with the various primer stats. http://www.jamescalhoon.com/primers_and_pressure.php Basically if loading SRP format I'd stick to remington 7 1/2 or cci 450, br4, or #41 primers, and I'd stick with the more conservative loading data. If you are using one of the thicker SRPs, then to me that just looks like you are dealing with a sloppy firing pin hole dimension vs firing pin diameter and the brass doesn't look stressed, however your pics are more like you want to have a romantic dinner with your brass rather than inspect them thoroughly. If you want to be extra careful, check your bolt face for any scorch marks/erosion. For the brass, take a paperclip unfold it and bend one end to a small L. Probe the case wall above the case web form the inside of the case, and if it feels like it catches hard in a doughnut around the case head.. congrats, you beat the crap out of your brass and should get some more and back off on the loads. But I doubt the brass is messed up given the fact that SRPs should fail well before loadings that will FUBAR your brass. Also, I highly suggest picking up the lee reloading manual and read the first half that isn't load data. It's cheap and very informative. Given 6.5 creedmore is a big case for small rifle primer, and intended for accuracy, I'd go with the remington 7 1/2 br primers. They are benchrest primers, very consistent and produce a hefty flame kernel to light up that much powder. Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 3, 2019 I had use CCI 400 primers. Though it wasn't really a question about primers. It's the cases I was more concerned about. Primers look good to me but I can switch to thicker ones. From what I've read, Starline small primer still has a larger flash hole. Given the precision of the rounds, I don't see any really reason for going higher with loads. I'll probably experiment between 39.5-40gr. I see people online saying their normal 6.5 CM load is 43gr of H4350 but I'm fine where I'm at. 14 hours ago, USRifle30Cal said: Do you have a saami case gauge for the caliber? Yes, I checked every round just to be certain before using them. No issues. It seems just like a cosmetic thing but I wanted to be sure. Quote Share this post Link to post Share on other sites
CAL. .30 M1 2,101 Posted December 3, 2019 29 minutes ago, Greenday said: I had use CCI 400 primers. Though it wasn't really a question about primers. It's the cases I was more concerned about. Primers look good to me but I can switch to thicker ones. From what I've read, Starline small primer still has a larger flash hole. Given the precision of the rounds, I don't see any really reason for going higher with loads. I'll probably experiment between 39.5-40gr. I see people online saying their normal 6.5 CM load is 43gr of H4350 but I'm fine where I'm at. Yes, I checked every round just to be certain before using them. No issues. It seems just like a cosmetic thing but I wanted to be sure. Plunk each one into the gauge...what do you see Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 3, 2019 5 minutes ago, USRifle30Cal said: Plunk each one into the gauge...what do you see The used cases? I'll do that when I get home. Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 3, 2019 Reloading is dangerous 1 1 Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 3, 2019 49 minutes ago, Ray Ray said: Reloading is dangerous Good thing I'm asking questions before making assumptions. 1 Quote Share this post Link to post Share on other sites
JackDaWack 2,895 Posted December 3, 2019 58 minutes ago, Ray Ray said: Reloading is dangerous No, being ignorant is. 1 1 Quote Share this post Link to post Share on other sites
Ray Ray 3,566 Posted December 3, 2019 46 minutes ago, JackDaWack said: No, being ignorant is. Ignorance is bliss 1 Quote Share this post Link to post Share on other sites
raz-0 1,259 Posted December 3, 2019 3 hours ago, Greenday said: I had use CCI 400 primers. Though it wasn't really a question about primers. It's the cases I was more concerned about. Primers look good to me but I can switch to thicker ones. From what I've read, Starline small primer still has a larger flash hole. Given the precision of the rounds, I don't see any really reason for going higher with loads. I'll probably experiment between 39.5-40gr. I see people online saying their normal 6.5 CM load is 43gr of H4350 but I'm fine where I'm at. Yes, I checked every round just to be certain before using them. No issues. It seems just like a cosmetic thing but I wanted to be sure. You'll have to take better pictures or circle what you are concerned about. I wouldn't bat an eye at any of the brass pictured. But some of your primers have some nice flow into the flash hole. that really shouldn't be happening that much. I would step up to a thicker primer. I won't load 6 1/2s or cci 400s in .223 and 6.5 creedmore is higher pressure. Quote Share this post Link to post Share on other sites
fishnut 2,358 Posted December 3, 2019 56 minutes ago, Ray Ray said: Ignorance is bliss A certain amount of brain damage is of therapeutic value Quote Share this post Link to post Share on other sites
CAL. .30 M1 2,101 Posted December 3, 2019 2 hours ago, Greenday said: The used cases? I'll do that when I get home. Yes yes of course 2 hours ago, Ray Ray said: Reloading is dangerous Yes it is...if you do t learn what your are doing... Quote Share this post Link to post Share on other sites
RUTGERS95 890 Posted December 3, 2019 what bcg are you using? primer cratering is light but present so my guess is you are using a 308 instead of 6.5 bcg (has smaller gas port hole and is made for higher pressure) dollars to donuts you will see a better primer pop if this is your culprit Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 3, 2019 5 minutes ago, RUTGERS95 said: what bcg are you using? primer cratering is light but present so my guess is you are using a 308 instead of 6.5 bcg (has smaller gas port hole and is made for higher pressure) dollars to donuts you will see a better primer pop if this is your culprit It's the stock one on ther rifle. TC LRR Quote Share this post Link to post Share on other sites
RUTGERS95 890 Posted December 3, 2019 1 minute ago, Greenday said: It's the stock one on ther rifle. TC LRR I'd google/research and see if there is any issues with pressure. could be the ammo of course, did you try other ammo? Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 3, 2019 Some American Eagle 120 open tip match. Users a large primer. Primer crater is similar size. Quote Share this post Link to post Share on other sites
RUTGERS95 890 Posted December 3, 2019 I would call and ask TC as it looks like their bolt is the same as their other TC designs. See what they say and especially since you are saying the primer looks the same with the AE 120otms (which I have used and they are not that hot for factory) interesting Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 3, 2019 Attached is a used Starline in a case gauge. The American Eagle rounds look exactly the same. Entire body fits inside, just not the end. Probably from the neck slightly expanding from pressure. Quote Share this post Link to post Share on other sites
CAL. .30 M1 2,101 Posted December 4, 2019 7 hours ago, Greenday said: Attached is a used Starline in a case gauge. The American Eagle rounds look exactly the same. Entire body fits inside, just not the end. Probably from the neck slightly expanding from pressure. Your concern was brass differences as witnessed by your eyes.....so you plunked each one.....are they similar....in terms of seating depth etc . ? Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 4, 2019 8 hours ago, USRifle30Cal said: Your concern was brass differences as witnessed by your eyes.....so you plunked each one.....are they similar....in terms of seating depth etc . ? The reloads were. Cases were all the same. Powder all the same. COAL was +/- were all either 2.8100 or 2.8095". I'm probably just overreacting but I just wanted to get a second opinion from experienced reloaders. Quote Share this post Link to post Share on other sites
carl_g 568 Posted December 4, 2019 Can you circle what you are concerned about on the brass? I cant really see anything other that three scratch marks that most likely happened during extraction. But I am not really sure what you are asking us to look at. 2 Quote Share this post Link to post Share on other sites
CAL. .30 M1 2,101 Posted December 4, 2019 6 hours ago, Greenday said: The reloads were. Cases were all the same. Powder all the same. COAL was +/- were all either 2.8100 or 2.8095". I'm probably just overreacting but I just wanted to get a second opinion from experienced reloaders. You seemed concerned abt the brass after firing...... Your eyes for the most part cannot see certain things....the case guage can tell you a lot on fired brass as well..as that is a fixed datum point if reference. Brass of differing manufactures etc can exhibit differing characteristics..and those of the same consistency exhibit the same...or close.... So..there was one ...that must have prompted your concern.... when placed in the gauge..do you see anything that inducates .. Some sort of anonmoly Quote Share this post Link to post Share on other sites
Greenday 323 Posted December 4, 2019 2 hours ago, USRifle30Cal said: You seemed concerned abt the brass after firing...... Your eyes for the most part cannot see certain things....the case guage can tell you a lot on fired brass as well..as that is a fixed datum point if reference. Brass of differing manufactures etc can exhibit differing characteristics..and those of the same consistency exhibit the same...or close... So..there was one ...that must have prompted your concern.... when placed in the gauge..do you see anything that inducates .. Some sort of anonmoly Honestly, it was just those 3 marks that carl_g was talking about. Marks from being extracted could just be all they are. 3 hours ago, carl_g said: Can you circle what you are concerned about on the brass? I cant really see anything other that three scratch marks that most likely happened during extraction. But I am not really sure what you are asking us to look at. Those three scratch marks are what I was talking about. I dont see that with my 5.56 hunting rifle so I guess the 6.5 just is a little rougher extracting it. Quote Share this post Link to post Share on other sites