Portable Shooting Bench

[Mr.Forks 20]

What do you guys use in the way of portable shooting benches? I'm not against building my own but its a bring out what you bring in deal, so weight is a big consideration.
I've seen a portable plywood one on ebay but the cost was pretty extreme. 

[Zeke 5,504]

2 hours ago, Mr.Forks said:

What do you guys use in the way of portable shooting benches? I'm not against building my own but its a bring out what you bring in deal, so weight is a big consideration.
I've seen a portable plywood one on ebay but the cost was pretty extreme. 

Prone or kneeling or standing or the knee rest thingy position.

Where are you shooten you need a bench?

[Mr.Forks 20]

Friend has a farm in pa,

Plenty of space just cant be permanent. 

[Pizza Bob 1,488]

There are several collapsible / portable ones commercially available. Check places like Midway or Natchez. Usually run around $100 & up.

Adios,

Pizza Bob

[Ray Ray 3,566]

I own this one for the family farm.   Works great 

MTM HLST High-Low Shooting Table https://www.amazon.com/dp/B01NAPIUIW/ref=cm_sw_r_cp_apa_i_V01pEbRZVT4YJ

[124gr9mm 859]

Misread the title...

 

 

 

 

[tony357 386]

13 hours ago, Ray Ray said:

I own this one for the family farm.   Works great 

MTM HLST High-Low Shooting Table https://www.amazon.com/dp/B01NAPIUIW/ref=cm_sw_r_cp_apa_i_V01pEbRZVT4YJ

Are you shooting or ironing?

That's not bad little setup.

 

[Ray Ray 3,566]

9 hours ago, tony357 said:

Are you shooting or ironing?

That's not bad little setup.

 

I guess you could do that with it.  

[Mr.Forks 20]

Anyone with hand on experience with any? Everything online looks great until it arrives at my house and I hate it.

 

[BillC. 26]

I use a home made copy of the  Portektor #53 Shooting Bench (google it) .  3/4" plywood 2ft x 4ft with folding legs from a junk table. added a couple angle iron rails to make it stiffer. not to heavy, folds fairly flat ,  bring a a folding chair for a seat.

cost about $15, only had to buy the plywood

[Mr.Forks 20]

2 hours ago, BillC. said:

I use a home made copy of the  Portektor #53 Shooting Bench (google it) .  3/4" plywood 2ft x 4ft with folding legs from a junk table. added a couple angle iron rails to make it stiffer. not to heavy, folds fairly flat ,  bring a a folding chair for a seat.

cost about $15, only had to buy the plywood

Could you put up a picture for me?

[Mr.Forks 20]

On 2/10/2020 at 10:58 AM, BillC. said:

I use a home made copy of the  Portektor #53 Shooting Bench (google it) .  3/4" plywood 2ft x 4ft with folding legs from a junk table. added a couple angle iron rails to make it stiffer. not to heavy, folds fairly flat ,  bring a a folding chair for a seat.

cost about $15, only had to buy the plywood

finally googled it, been a super busy week.
Where did you add rails to stiffen it, under the table top or to the legs?

[BillC. 26]

under the  top, the long way between the leg bases. used the leg mounting bolts. just some scrap angle I had. 3/4 ply alone is good enough for shooting, the angle iron makes it stiff enough to sit on with out flex.