-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By Rick_F
Hi there,
I was wondering what muzzle brakes/comps everyone is using. I have a Battle Comp on one of my rifles and a KVP on an "other." I'm looking for an option to pin on a 14.5" barrel to exceed 16'. I was hoping for something milder than the Battle Comp, which exhibits too much concussion for my tastes. A few people recommended the VG6 Gamma, but I would need the EX for length, and it looks to be discontinued. The Epsilon has the length but VG6 said it's not NJ legal. The Bravo Comp looks good, but on some old threads here it wasn't clear if it was GTG from a legal standpoint. Please let me know what you would recommended for shooting in an indoor range. Thanks.
-
By My1stGlock
I'm sure most of us in Central Jersey, Monmouth county know about Steve's compliance work but figured I put it out there for those that are looking for great work and reasonable prices.
Here's some pics of the brake up close and the pin/weld. That little dot is the pin and weld on the last image. Looks like factory! The other pics are just since I'm uploading anyways lol. What do u guys think about the red mag release. I'm on the fence on that. Gonna add a vertical foregrip and prob a red dot w/ irons when its all said and done.
-
By Lone Shark
Daniel Defense - DDM4-V7 - Rattlecan Cerakote Finish, .556 Semi-Auto Rifle, M-LOK, 16" Barrel.
Included with Rifle:
3 - Daniel Defense 10 rd. Mags.
Daniel Defense Muzzle Climb Mitigator, Gen II.
Magpul front and rear flip sights
BipodDeflector Brake Kit
Tipton Max Force carbon fiber cleaning rod.
Daniel Defense full-latch impact plastic case
380 rounds ammo.
Monmouth County Area - $2,960.
All Brand New - Never Fired - New Jersey Compliant
The first to post "I'll take it" wins the sale.
-
By StanMan01
Looking to sell an AR-15 with the following specs:
Upper:
Barrel: PSA 18" .223 Wylde SS Barrel (1/7 Twist)
Comp: VG6 Comp Pin and Welded by Tier 1
Rail: PSA Lightweight 15" MLOK Rail
BCG: PSA 5.56 Nitride MPI Full-Auto Bolt Carrier Group purchased on October 9th 2020
Optics: Scope is not included. I can include an EoTech 512 with GG&G Lens Cover (Logo is plain GG&G Logo) with box for $355 if the buyer is interested (Eotech Sold)
Lower:
Receiver: PSA AR-15 Lower Safe/Fire purchased on October 20th 2020.
LPK: PSA Lower Parts Kit
Stock: RRA A2 Buttstock Kit, Black
Trigger: Geissele SSA-E Trigger ($240 Trigger) - Has 0 rounds on it, Purchased on October 23rd. Can include original MilSpec take-off trigger
Pistol Grip - Have a replacement Hogue OverMolded Pistol Grip that will be included
Magazines:
2 - 10rd PMags Included
Ammo:Depending on Buyer need I can sell .223 or 5.56 (XM193 or XM855) at cost
Misc. Accessories: CMMG .22lr Conversion Kit unused with 10rd mag - $120 (Only looking to sell with the AR at the moment)
Rounds Count:
Upper has about 250 rounds down the pipe
Lower: Maybe 50 Rounds
Price: $SOLD
Location: Essex or Monmouth County FFL
Buyer must have FID and matching Driver License. Transfer will abide by all state/federal laws
First "I'll take it" gets it
Can provide additional photos upon request.
-
By Swizz70
Hello Gents,
I'm selling my (like new) AR mid length complete upper receiver chambered in 300BLKOUT 7.62 × 35mm manufactured by Special Ops Tactical. Only put approximately 100 rounds through it. For those of you who don't know, this basically will fit on most AR lowers and uses the same AR magazines but gives you a .30 caliber (7.62 x 35) by just swapping the upper receiver if you are looking for a heavier load and more knock down power for hunting etc. (obviously state laws apply). I'm only selling it because I ended up buying a complete .30 caliber rifle.
Here are some specs:
300 BLK Out Nitride - 14.5″ Pinned to 16" Overall Midlength Upper
GPX 12.6" MLOK Free Floating Rail System with continuous 1913 Picatinny rail on top
Muzzle Brake Original "Black Magic" 30 Cal (pinned & welded NJ legal).
{Nitride} M4 Extended Feed Ramps
Nitride M4 Barrel Extension
1:7 Twist Rate
5/8×24 Thread Pitch
Raptor Charging Handle
Price: $695
Pm or email me with any questions: [email protected]
I am in Deptford NJ.
THE FIRST TO POST "I'LL TAKE IT" WINS THE SALE.
A "PM sent" DOES NOT ESTABLISH THE SALE. If you want the item, post "I'll take it" and should the deal fall apart the seller can post "still available." Should you reach a negotiated price via PM then post "I'll take it per our PM(s)" on this thread.
-
-
Posts
-
By Gregory Sutton · Posted
Looking to let the lwrc go this weekend, 1100 for this weekend! -
Sold Pending Funds. Will update when it's final or becomes available again.
-
WTS- 1.Centurion Arms CM4 5.56, factory done by Monte with 16" chf medium contour barrel with polished ramps and OD Green barrel (options no longer offered). LMT ambi handle, AST trigger, B5 stock, Colt OD green buffer tube (I sent him this to use), BG6 brake, Magpul overmold grip-----(Burris RT6 and ADM Mount not included less than 500 rounds but in keeping with CA accuracy (for those that don't know, CA are like early Noveske accuracy when John was around) printed .65 with 77gr mkt 262/black hills. With $hitty AE 55gr she still prints MOA for 5 shot groups you simply cannot find a better price as standard CM4 is 1475 new without any upgrades. Priced to move as eye on other thing ...........1k for rifle 2.Home build side charger 5.56, 14.7" BA pencil barrel with BCA upper/BCG, Aero Lower, RTB FF rail, Aero LPK, A2 stock, BCM grip........$400 for rifle prefer to use Steve at Monmouth Arms but open, both rifle fully compliant First post to post 'I'll take it' wins like I normally do, will keep up for 2-3 days then move to my usually spots but will give the NJ crew a look first any questions let me know, no trades, you want it you pay for it https://imgur.com/a/rLU4X1P
-
WTS: Glock 19 Gen 4 Approx. 200 rds like new condition. Comes with original case and all contents as shown. 3 NJ compliant magazines. Standard sights. $450 with fees by buyer Located in Bergen County, willing to travel to FFL within reason. First post “I’ll take it” wins sale.
-
-