Jump to content
Mr.Stu

IDPA Intro class - August 29

Recommended Posts

21 hours ago, Mr.Stu said:

Inner/outer belts are not legal in IDPA. Your belt must pass through all but 2 belt loops on your pants. I don't insist on it in my class, but expect to be told about it every time you used it at a club match and expect to earn an equipment DQ at tier 2 matches and above.

The number of mags you need depends on the division you're shooting. SSP, ESP & CO have a division capacity of 10. If you're running Jersey legal mags life is easier if you have 4 but you can get by with 3. You'll need 2 mag pouches.

The inner belt is supposed to be very stiff and designed to be used alone as a low profile EDC/CCW belt. Hopefully that's okay.

https://warriorpoetsupplyco.com/low-profile-inner-edc-belt/

I have 3 mags and 1 double mag pouch. I'm still reading over the rule book, but it looks like if I take out my aftermarket trigger I can shoot SSP. 

 

Share this post


Link to post
Share on other sites

Hello all

I wanted to say thank you to @Mr.Stu for holding the IDPA into class today.   I had a great time and learned so much.  Also thank you to RSOs (Jon, Joe and Jim) that helped out.

looking forward to participating in my first match next month at Pburg.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.



  • olight.jpg

    Use Promo Code "NJGF10" for 10% Off Regular Items

  • Supporting Vendors

  • Latest Topics

  • Similar Content

    • By Mr.Stu
      Registration for the 2024 PA State IDPA Championship is open.
      It will be held at Wilkes-Barre RPC from July 12 thru July 14.
      Sign up here: https://practiscore.com/2024-pennsylvania-state-idpa-championship/register
    • By Mr.Stu
      I have been asked to run a class to prepare people for carrying a defensive firearm by my home range, Phillipsburg Pistol club.
      It will be held on August 6th, from noon until approx. 4pm.
      We will cover safe use of a holster and a number of defensive shooting techniques.
      The class will finish with running each student through HQC1 and a certificate will be provided for those that achieve a passing score.
      It is open to all, but members of Phillipsburg Pistol Club will have spots reserved for them.
      Sign up here: https://www.eventbrite.com/e/holster-use-and-defensive-shooting-techniques-registration-675278625547
    • By Mr.Stu
      I'm looking at running my IDPA Intro class a couple of times this year.
      I'm trying to create a bit of separation between the classes and to run on different days of the week to accommodate those that have regular commitments on a schedule.
      I have booked the range for August 29 which is a Saturday.
      I also wanted to run it on Saturday, June 7 but the range is not available that day. 
      Is there any interest in a class on a weekday in June?
      Please let me know.
    • By Mr.Stu
      I am going to run another introduction to IDPA class in September. There are quite a few members here who have taken the class and followed up with going to matches and having a good time getting off the X.
       
      If you have been wanting to get into practical shooting matches, but want a step up so you don't walk in blind, please consider this class.
       
      Sign up is here: https://idpa-intro.eventbrite.com
       
      Thanks for looking,
       
      Stu (Mr.)
  • Posts

    • In 50 years of living in NJ I've never experienced any attempt to inspect the interior of the home, and only one definite inspection of the exterior for an announced reassessment of all properties and that was a drive by. About 9 years of that was living in an apartment, but still, uncommon. Every place I lived had either a finished attic, basement, or both. But they were also included in the habitable square footage on the taxes when we got there. 
    • 27.00 and change in tolls to drive down the shore from Rutherford,  47.00 in tolls to go out to Long island to visit dying relatives. Now I read they are going to raise the fees in the DMV. Murphy lied just to get elected when he said that seniors will get a significant tax break with his StayNJ" program to stop us from leaving.   Keep voting for democrats...this is what you get.  Tax and spend is all they know.  Never cut anything.  This state sucks.
    • I get the added benefit that since I have a TSP rather than a true 401(k) they tax my retirement too. Yaaaay!
    • PX4 Full Size 9mm Type G. Upgrades include: - Type G Stealth/Low Pro Levers and Slide Release - Truglo Tritium Pro Sights, White Outline Front Sight - Beretta Competition Trigger Group - LTT Optimized Trigger Bar - PX4 D Spring All parts professionally installed by gunsmith. Pistol has 400rds through it. All original parts (trigger group, trigger bar, Type F levers, sights) are included in sale. Original Beretta case and all contents included in sale. 3-10rd mags (these are the original mags that came with it). Pistol is in Excellent condition, there are a couple minor smudges on the lower part of the slide near the frame which I guess is from the sight vise. If I didn't point them out you wouldn't even notice. Trigger is super sweet, especially the SA Reset. Between the gun, parts, and gunsmith labor I have about $1200 into it. $800 Sale is Cash Only.   I'm in Whippany near Morristown. I will travel within a reasonable distance to meet at your preferred FFL to do the transfer. Buyer pays transfer fees.   -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------      
×
×
  • Create New...