-
Supporting Vendors
-
-
Latest Topics
-
-
Similar Content
-
By rifleman
Model 1891 Argentine Mauser 7.65 x 53 with bayonet. Not an exact match but fits pretty good. This fine weapon is an engineering marvel well over 100 years old. Ramp sight to 900 yards for harassing fire to prevent free movement in the enemy's camp. Steel is in pretty good condition. All threads have been lubricated and work fine. Crack in upper handguard & the stock was secured with 2 screws. I have shot this many times and he is a beast. If your'e looking for a shooter, Boyd's has replacement stocks and you can take your spot on the line with fine German craftsmanship.
Barrel has all the right stamps and marks according to several articles.
I had this gun for 35 years and time for a new home. I used to display it in my office with the bayonet but it looked way too scary.
22 boxes (440 rounds) of new ammo included. They go for $40 per box now!
Rifle, bayonet (with metal sheath) & ammo $450 or trade for 12g target ammo/silver. I can bring it to Central Jersey Rifle Pistol Club for inspection.
First reply I'll take it gets the prize
-
By RetNJ47
Great start for people looking to get into reloading. $500. (FIRM)
RCBS Rock Chucker Supreme IV Single Stage Press on Inline Fab stand with extras. Located in the Lakewood area(Weshoot or Shoreshot). Would prefer to meet at either of those spots but willing to meet halfway.
Rockchucker Supreme IV Single Stage Press
https://www.rcbs.com/presses/single-stage/rock-chucker-supreme-press/16-9356.html
Inline Fabrication Ultramount for RCBS Rockchucker, RC1,2,3. Supreme IV,Pro2000 & Turret presses.
https://inlinefabrication.com/collections/rcbs/products/ultramount-for-rcbs-rockchucker-rc1-rc2-supreme-pro2000
Inline Fab Automatic Case Ejector System
https://inlinefabrication.com/collections/rcbs/products/case-ejector-system-for-rcbs-rockchucker-single-stage
Inline Fab Universal double component tray system.
https://inlinefabrication.com/collections/press-accessories/products/universal-double-bullet-tray-system?variant=323708361
RCBS
Uniflow Powder Drop
https://www.rcbs.com/priming-and-powder-charging/mechanical/mechanical/uniflow-powder-measure-iii/16-9016.html
M500 Mechanical Scale
https://www.rcbs.com/priming-and-powder-charging/weighing-scales/m500-mechanical-scale/16-98915.html
Powder Trickler
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/powder-trickler-2/16-9089.html
Universal Case Loading Block
https://www.rcbs.com/case-processing/accessories/universal-case-loading-block/16-9452.html
Hand Priming Tool for Small and Large Primers
https://www.rcbs.com/priming-and-powder-charging/hand-held/hand-priming-tool/16-90200.html
Additional press add ons:
(NIB) Advanced Powder Stand
https://www.rcbs.com/priming-and-powder-charging/scale-and-powder-accessories/advanced-powder-measure-stand/16-9092.html
(NIB) RCBS Auto Prime System
https://www.rcbs.com/presses/press-accessories/rock-chucker-supreme-auto-prime/16-9358.html
Hornady impact bullet puller.
Small items include (2) funnels with different attachments, calipers, primer pocket brush, case lube, case wax, case lube pad, lube pad roller, and die wrench.
All the heavy lifting to start reloading is done. This press/die set has only been used to deprime a few cartridges(I have no patience). Aside from dust it’s brand new.
****DISCLAIMER**** Not my fault if you do something stupid and get hurt. Do your research.
-
By RetNJ47
Selling my Troy A4 “Other” Firearm 5.56(.223) with Blast Shield (faux suppressor) and BA Hanson profile 11.3” precision barrel with Silencer Co ASR muzzle brake.
Had gunsmith remove pin and welded muzzle brake on stock 10.5” inch barrel. Upgraded to BA 11.3” performance barrel bringing OAL to 26.8 inches without pin and welded muzzle device. ASR threaded Silco brake added with 6” Blast Shield. Trigger/Feed Ramp polish job for smoother take up and crisp reset(for a Mil-Spec trigger). Only 40 rounds have been fired for testing and proper initial barrel break in using Modern Spartan Systems accuracy oil between shot cycles.
Full list of modifications:
-Ballistic Advantage Hanson Profile 5.56 chambered 11.3 inch Performance Series Barrel
-SilencerCo Muzzle Brake
-SDTA 6” Blast Shield
-SBA3 Brace (Black or possibly FDE available)
-Magpul Gen 2 BUIS and Vertical Foregrip
-CMMG Stainless Gas Tube
$1550
Located in Toms River with closest FFL being Weshoot/Shoreshot. Buyer responsible for transfer fee at FFL.
Still have stock barrel also if interested.
**Eotech Not Included** if interested it’s an EOtech EXPS2-0 and I have a G43 magnifier w/STS mount and Surefire light with pressure pad to go along with it.
-
By dman2112
Hello all,
Some opinions please. I am a long time NJ resident and also a resident in SC. I spend 8 months out of the year in NJ out of necessity. When I leave NJ I carry everywhere as I have multiple CWP's. I have purchased many pistols legally in NJ over the years.
I was thinking about getting some new permits to pee...(my term for the Pistol Permit) but with all the BS that had been going on I was thinking about refraining.
I also have completed all the NJ CWP permit applications, but I am not sure I am actually going to apply. I don't need to put up with the NJ BS. To me it's insulting. Plus with all the restrictions coming and being tied up in the courts for probably years, it may be just a futile exercise. I would rather just leave when my house is build in SC and buy it there. Once I switch my license to SC, its cash and carry for me.
I have the old, non-expiring FID. What I do not want to happen is if I go apply for new permits to pee, that my FID gets converted to an expiring one and then I have to pay a renewal fee.
I did read the new regs and it looks like they are grandfathering old FID folks to the non expiring one but this is NJ...what is written in law is usually ignored by the class warfare system we have here and the horrible mentality and attitude of some of these LEO's and NJSP officers that think their personal bias is important and the sneers you get when you go pay the $2.
Am I being paranoid?
-
By Pat
Hi guys , quick question, I have a friend who I'd like to gift my long gun to , but he does not have a firearms ID card or a hunting license, can I still legally gift him one of my long guns in New Jersey
-
-
Posts
-
By Displaced Texan · Posted
I’m back in Sunnyvale California this week. Last week, regular was right at $5/gallon. Now, it's $5.19. -
By Displaced Texan · Posted
That’s 535 of the most useless bastards I’ve ever seen. -
Good. Hopefully they will pay the legal fees when they lose Carry Killer bill and Mag Restriction and AWB ban cases.
-
Costco Union had it $3.25 today so I filled up - cuz the one in North Plainfield shot up to $3.39 (Was $3.19 last week).
-
-