Leaderboard

Attic fans are great, or they are terrible. I mean that 100%. The problem with most attic fan installations is they end up pulling conditioned air out of your home and venting it out the roof. If you go in your attic and pull back insulation you will see lots of penetrations in most houses from wiring, duct work, plumbing stacks and often just gaps in Sheetrock. If you run an attic fan in a house like that it will pull air from all those openings. I had a foot of loose fiberglass blown into my attic on top of the existing fiberglass bats. Before I did that I pulled up all the batting and caulked around every single penetration and totally sealed the attic from the house below. Now the attic fans with correct baffles does a great job of keeping the attic cooler without sucking out conditioned air.

Lmao! Howz that bus feel on top of ya? [emoji23] Sent from my iPhone using Tapatalk

If NJ goes to 10, you should just buy 30s. Sent from an undisclosed location via Tapatalk

You mean Pangaea The old super-continent, Not the bakery.

You don't cool the hallway or the bathroom, you leave the doors open and the air will migrate in those rooms. If you want to do a ducted system you put everything up in the attic, and drop registers from the ceiling in each room. The return goes in the hallway ceiling. Downstairs is always tricky. Usually you have to sacrifice a closet for a trunk. Or you can do mini splits in the downstairs. Sent from my SM-G900V using Tapatalk

I see Mrs peel finally used her permit

Thanks! I kinda like the mini-split idea. There are a number of different options there.

Sizing in Florida is very different than how we size. We go approximately 1 ton per 500sq foot here. Down there they usually go larger. If the A coil is the only thing leaking I would just replace it. And have the lineset pressure tested as well. Which is something we all do when changing a coil. You can't just jam a larger ton condenser and coil into an existing system that's sized for 3 tons. You're ductwork may not be large enough for the additional tonage. And the additional room isn't included in your ductwork sizing. Chances are everything would need to be made larger to work. Or you could just add one minisplit to the sun room and not have to worry about the rest. Would be my advice. Sent from my SM-G900V using Tapatalk

Come pull a weed out of my garden and I'll pay you a dollar, there I'm your boss for all intents and purposes. Your boss is a cool guy, just sayin'

I'm lucky, my boss is totally 2A friendly lol... Sent from my SM-G900V using Tapatalk

Infamous lives in Mt Olive. Permit turnaround time is fast there. Sent from my SM-G900V using Tapatalk

It's hard to mess up a choke tube... Personally, I stick with OEM, which means Remington. My Ithaca was shortened to about 20", but had it threaded for Remington chokes for compatibility with my hunting shotguns, which I have pretty much most of the common sizes. My KSG uses a SMT Tactical choke adapter... which also uses Remington chokes. Was considering having my IAC 97 and Century PW87 threaded for them... but think I'm going to wait until I get other things squared away (would like to refinish them, as well). The only shotgun that uses different chokes is my Mossberg SRII, which is my trap gun. Run full and improved modified in it. Think they are Beretta/Benelli chokes. Stock ones were extended, so easy to tighten down. No desire to pick up more. And I agree... clean and grease them before installing. Saves a lot of headache. If you buy tubes online, get a tube with them.

I use Carlsons, never a problem, pattern well. Use extended chokes, forget about the ported ones, not worth it, and make sure you lube them before you put them in. I use a light coating of Rig plus P stainless steel grease.

In the 9 years I've had it I have spent $2,400 on gas so there is that. Just not much else. I have a hard case now, the trash bag was just to get the Mosin home from the shop where I got it.

I haven't received anything yet. Not even a confirmation email. I was very busy at work this week and almost forgot about it. I'm going to call on Monday.

More importantly, why is it running 8-9 times a day, and only the Spin Cycle?

What's his name Sent from my SM-G920V using Tapatalk

Got you beat. I transported my Mosin 91/30 in a black trash bag in my Smart Car. Had to fold down the passenger seat so it would fit. Ammo was behind the seat.

I was jus gonna post how I use balistol like most of the posters here. Fine, whatev MrsZ use HE's stuff!

You coming to 7/14? I would like to talk to you

For all you Jeff Cooper fans, Ruger has announced a 10MM in their SR1911 platform. Just a little competition to the Colt Delta Elite. Looks promising. Jeff Quinn always gets to try out Ruger's new toys first of course

@Old School is so old He sailed around Pangea Oh not once but twice!

PP has upper management written all over him

Yes, it is a unique color for sure... FYI - GSG Coatings quality is great but the estimate was off by $75, The 10 day turn around was actually 20+ requiring several calls to get them started and some of the components were reinstalled incorrectly ( I was charged for gun smithing reassemble time) I would only use them again for simple jobs that I was not in a hurry to get back. Sent from my iPad using Tapatalk Pro

Weights are too heavy And running makes me tired I do not partake

Ballistol... I put that sh*t on everything! No joke.. I use it all over the house, the garage, etc, good stuff. On the firearms I also use Hoppes #9, G96 and Tetra grease.

Yes. The ffl shouldn't have let that leave with you. Go now Sent from my SM-G920V using Tapatalk

I like it.....the wife not so much....lol

Because destruction of State property is illegal.

Oh, you got jokes, huh? Explain my Glock malfunctions Despite the ammo

Taylor Ham wins big. Oh, pink succulent temptress! Pork roll is so slayed.

Griz always speaks truth. If you just stop and listen, Maybe you will learn.

Griz is a fountain. The knowledge pours so smoothly. We are not worthy!

Yes, I like my Glocks. I am not ashamed of this. They always go bang!

[sarcasm] 9 millimeter? What a weak little bullet. Should shoot forty-five! [/sarcasm]

This one's for you H.E... He S.W.A.T.s in starlight. Come sunrise, he writes haikus. Renaissance Man thrives.

The Cap is perplexed. Seriously... Zeke haikus? His eyes roll skyward.

Gun games, in my opinion, would help more than they hurt. They make you far more proficient in shooting under stress (yes it's a different stress than getting shot at, but far more stress than standing on a bullseye firing line). They also make you more proficient in quick manipulations, firing on the move, etc. I don't think a bad guy is going to yell "unload and show clear!" to trip you up either. Not that it would. But opinions are like assholes, everyone has one

At how ludicrous prices? Talk to you about it or Joe?

I would look into ductless mini split if running ductwork would be an issue. I just installed ductless mini split in my house here in VA and love it. Super quiet and efficient (21 seer). The system is also has a heat pump.

My CCW will be up 100% this weekend, but will drop back down to 0% when I return home.

Help me decide my future. Marry a hot girl with a lot of money. That's the best advice I can give.