Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leaderboard

Popular Content

Showing content with the highest reputation on 11/25/2017 in all areas

  1. I have so many, but here is my favorite....................... (1977 Python - UnFired)
  2. OK, I'll share four interesting Smith & Wessons (some of these have been posted before)... First up is the one that Alec requested - and given the breadth of his competitive Smiths, I'm flattered. This is a Performance Center 627-4 chambered in .38 Super. These were made ca 2003 for the distributor Bangers. I believe that there were two production runs of 300 guns each. This is from the first run and is #214. It has a non-fluted stainless cylinder (chamfered charge-holes) in DLC black and a 5.5" barrel. It came with both a ported muzzle cap and a plain one. It has a ball detent in the yoke. I use this gun for USPSA and ICORE and as such have changed out the sights to a plain LPA rear and a Dawson FO front. It has had an action job and been converted to DAO. The grips are made by KSD. Next up is a gun that I had built in the early 70's. I was a big fan of Skeeter Skelton (a gun writer of the time) who was a big fan of the .44 Special cartridge. I badly wanted an N-frame .44 Spl. This was after Smith discontinued the Model 24 in 67 and before they reintroduced it in early/mid-80's. J&G in AZ had original 6.5" Model 24 barrels available. I bought one and then found a Model 28-2 for the foundation of the conversion. George Matthews of Downey, CA did the conversion which consisted of boring out the cylinder - including rebating the chambers and squaring the face, and installing the barrel. It had a Patridge sight on it, which I had changed to a Baughman ramp with a gold insert. My buddy and I changed the trigger to a smooth combat trigger and installed a Model 14 SAO rebound spring (this was well before the days of just buying a Wolff spring). The optic was added sometime in the 80's and is a first generation (Japan) Tasco ProPoint red dot on a B-Square mount. The grip is a custom, one-off Hogue monogrip in Micarta with brass spacer. The next two are limited run S&W L-frames. First is a Model 646, which is chambered in .40 S&W. Smith made about 400 Performance Center 646's with slab-sided barrels. Several years later they discovered left-over cylinders from that run. Smith is famous for never letting anything go to waste, so they utilized the remaining cylinders in a production run of regular production 646's with the round profile barrel with full underlug. There were appx 300 of these made. I used this for IDPA, until I retired it several years ago. It has an LPA plain rear sight and a Dawson FO front and basic action job - light stoning, Wolff springs and chamfered charge-holes. The grips are from the Smith X-frame Emergency Kit (they made an orange and a yellow one - one in .460 and the other in .500) Lastly we have what is known as a Brazil Contract Model 586-4. These are unique guns in a number of respects and it is hard to pin Smith down as to number made and how many ended up in the U.S. If you have the SCSW (Standard Catalog of Smith & Wesson) 3rd Edition and the fourth edition, you will notice there is additional info in the 4th edition - I was the source for that info. The most obvious feature is that these are chambered in .38 Special, not .357 Magnum. They have a 4.2" barrel which is the legal minimum for importation into some countries. The SCSW 3rd Ed talks about the 586-5 Brazil Contract guns which were shipped in 1993. The paradox is that the 586-4 (a chronologically older engineering change) were shipped in 1997 - four years after the 586-5's. The contract for the 586-5s was filled and the small overrun (<30) of the 4.2" guns were sold to U.S. distributors. The research that I did indicates that the second contract (the 586-4's) may have been canceled and the entire order sold to U.S. distributors, but I found nothing to corroborate this. Even if true, we are talking only several hundred guns. These 586-4's came with several features not found on regular production 586-4's. They have MIM cylinder releases (reg prod 1997) and MIM triggers (also 1997, but part of engineering change 586-6), yet retained the hammer mounted firing pin which was dropped in 1997 as part of 586-6. Suffice it to say that these are Frankenguns from the factory. This is a current IDPA gun and, again has an LPA rear sight. The front is a Dawson FO, but the original blade was integral with the ramp and base, so the blade and base were machined off and a Weigand sight base was installed that uses the interchangeable front blades. Light action job & springs and charge-hole chamfering plus the X-frame grips. Sorry if I got mired in minutiae, but that's what makes these special - besides, you asked for it. Adios, Pizza Bob
  3. Interesting article (with, may I say, a really nice use of short video clips that help bring the story to life). The article highlights those 5 accidents the 7th Fleet had in 2017 (discussed on here previously), but also discusses how that fits into the overall context of Naval force readiness. My own takeaway: when you see experts saying they need to "rebuild the Navy"... well, hmmm... that should give us some pause, shouldn't it? http://www.cnn.com/2017/11/23/politics/us-navy-seventh-fleet-breaking-point/index.html
  4. Watch your breathing. Vertical stringing like you have on your target is usually due to breathing. Inhale, exhale 1/2 way, hold it, align sights, shoot. With military sights I'd give that 4 clicks to the right at 25. Military sights move the strike of a round 1" @ 100. Do all this and you'll get all rounds in the 2" red square. Move the target out to 50 until you get them all in the red square then 100. Take your time. Speed will come. Do yourself a favor and learn to shoot with the iron sights before you put on a red dot. Red dots are great, easy to acquire, and very helpful. But learn iron sights first. HE is right. Cowitness the front sight with the red dot. I think it makes acquisition faster.
  5. Pics or it didn't happen
  6. Here's my smallest and largest wheel gun. Gotcha Ryan!
  7. 25 yards using a small pistol target with only iron sites. Very first time on the range with it. I can count all 15 bullet holes. And boy do I love shooting the rifle! I won't deny my pistols trigger time, but it is hard not to want to shoot a powerful rifle. I ordered an Aimpoint micro red dot H2 for it. Comes with the standard picatinny mount but I'm not sure if the optic is going to be sitting high enough to clear my iron backup site in front of it. Either I'll just remove the front iron site or see if I can find a mount that lifts the optic up just a little bit. I like low profile and don't want the optic sitting up in the air, but heck, it may even be easier to shoot and won't have to put my head into such a position. Anyone recommend a good mount that will clear the Magpul backup sites? I was eye balling this one hard. https://ads.midwayusa.com/product/736329/daniel-defense-aimpoint-micro-t-1-t-2-h-1-sight-mount-absolute-co-witness-matte?utm_medium=shopping&utm_source=google&utm_campaign=Optics+-+Scope+Rings%2C+Bases%2C+Mounting+%26+Accessories&utm_content=736329&cm_mmc=pf_ci_google-_-Optics+-+Scope+Rings%2C+Bases%2C+Mounting+%26+Accessories-_-Daniel+Defense-_-736329&gclid=CjwKCAiAo9_QBRACEiwASknDwbpTqYnGV1VYCaga2oNUtKPdF42m2vMfXS7oTFfxiXwAwRU9WUaB3BoCf8MQAvD_BwE Anyway, here is the target. Practice makes perfect!
  8. I have other .357's to shoot - the Python is saved (Un-Fired) for my grandson
  9. He uses what the student best responds to.
  10. Most of my AR’s have a flip down front sight (Colt 6944 uppers), but I keep them up. With a magnified optic (4x32 ACOG), I never see them. With my red dot equipped AR, I use a lower 1/3 co-witness. HE is right, it is the way to go. Still easy to acquire the irons if your red dot fails.
  11. Some great advice there from Griz!
  12. You will not be able to use the H1 (or any RDS) on an AR without a proper mount that brings the optic up to the right height. That being said - I have 2 of those DD mounts for the Aimpoint T1 (one older model mount that is only lower 1/3, and one newer one with the spacer in to make it lower 1/3). They work perfectly. Yes, lower 1/3 is the way to go. There are arguments for both folded down BUIS and fixed front sights. Do what works for you. My HD and Patrol carbines both have fixed front sights. My SWAT and training rifle has fold down BUIS.
  13. they don't bring it to the scotus because that won't make them money.
  14. On one hand some of these people argue that no body needs a "permission" to form a Constitutional Militia. In fact, some of these folks argue that We The People are ALREADY a Constitutional Militia by definition. THEN stop d*cking around making films, writing books and bring a case in front of SCOTUS. I still dont understand why these people complain about NRA. Is it the lack of money ? lack of plaintiffs ? $1 million ? $50 millions ? What is preventing these supposed scholars from bringing a case to SCOTUS based on Constitutional Militia argument ? We are back to square 1 where OP post started.
  15. Fuck Yeager. But I think this is a different guy: James Jeager. http://www.mecfilms.com/jrjbio.htm
  16. Yeah, I’m starting To learn living in a free state ain’t so free.
  17. Brownells selling Colt - AR15 M4 complete lower receiver 5.56MM for 249.99 free shipping and discounts can be applied depending on order total. Discount coupon codes ends on 11/26/2017. Free shipping, no minimum - Use code MEC Free shipping and 15.00 off orders over 150.00 - Use code MED Free shipping and 10% off orders over 300.00+ - Use code NAA *Remember that there will be compliance work needed prior to transfer by FFL for the stock. Regards, TokenEntry
  18. An alternate female friendly handgun is kinda obvious: Glock 19 G4 or G5. Also heard good things about Sig P320 Compact. For the record I have not fired the G5 or the Sig.
  19. The problem is, the anti-2A crowd began to interpret (even the Preamble) to mean "a restriction on the federal govt". They also interpret the 2A purpose to be "to secure State freedom". And then they proceed to conclude, hence, any restrictions State itself comes up for its Citizens are ok. They follow that thread to also conclude that its not an individual freedom, rather a Militia (to serve the State) right. With Feds controlling pretty much everything under "interstate commerce clause" and taking money (taxes) directly from individuals, THEN distributing to States, they got the proverbial "carrot & stick" to string along States. Along the way, States got rid of concept of "Militia" and stood up a State National Guard, effectively separating the Militia from general public. In practice, (obviously) its a web thats been creatively crafted. and deliberately setup. Would be interesting to see couple of States challenge interstate commerce, bring back concept of Militia and challenge all Federal firearm laws as unconstitutional. But thats not happening until Feds hold the keys to the money vault. And States like Texas, although chest thump as "free", they have their agenda. Look no further than youtube videos on how they treat their own Citizens who exercise 2A rights. So highly unlikely any State would walk the talk. HUGE problem in all this is, members of SCOTUS actually believes in this shit. I hope that changes quickly. Note: I personally think the authors at the time were so caught up in worrying about a centralized Govt abusing its power that they could not envision States like Maryland, New Jersey and New York degenerating into the cesspools they have become against individual rights.
  20. 1 point
    and less reliable
  21. 1 point
    The only problem is that in most places POTS really no longer exists. I is rare from what I understand to find a situation where the single copper pair actually runs all the way from your home to the Central Office. Instead, the copper pair typically meets up and is converted to fibre optics at some point and that is what goes to the CO. That means any electrical outage and your phone goes out.
  22. This was internet video about ten years ago: This was internet "video" 20 years ago: So if you're sitting here acting like "well see there, the government caused this because blah blah they weren't throttling nothing ten years ago!" Well then you maybe need a refresher that ten years ago Netflix used to mail you DVDs.... There is literally no such thing as "it was fine in the past" with this issue.
  23. I can’t believe how good this turkey tasted. Moist, tender, and an amazing flavor. The bread turned out fantastic too! Mrs Tex and I (and the tactical weiner dawg, too!) are on the couch, rubbing our bellies, we’re all done for the night! Thanks for hanging around with us! Tex
  24. Sounds like the kids' father wanted the kids to himself, without his estranged wife in the picture. If that's the case, he's the one who should be in Rikers, not her. Fook NYC. They get NONE of my money!
  25. Why would the police search the vehicle? Why did the husband call the police after he took the kids? Did she threaten him or something? Did the police ask "do you have any weapons?". It seems like this is being sold to us as NYC overreach, which it is, but that there's something else going on.
  26. 1 point
    I know what you're saying... but then again... 1) The election of Murphy is undoubtedly going to drive new users to these forums, or perhaps make them more active. We can't afford to be too paranoid... or we drive people away from these forums (or worse yet, the shooting sports) by accident. 2) And let's consider the worst... that anti-2A people are suddenly "snooping" around here... what will they really learn? They might look at the resources section which has the results of large credible crime studies (they'll see that law-abiding gun owners have been proven to be incredibly unlikely to commit crime, and that an overwhelming proportion of serious crime - including those using guns - are committed by career criminals/former felons). They'll learn that the dreaded AR-15 is RARELY used in gun crimes. Etc., etc. For me personally, looking at the results of crime studies was nothing less than eye-opening. They'll also realize that gun owners in NJ are subjected to a quagmire of laws which often make NO sense --- and yet they go out of their way to know them, and help educate newbies. Taken together - they might even start wondering (as many crime researchers themselves have done) - wow, are we putting emphasis on the wrong people? Instead of making life harder for law-abiding gun owners, should we instead focus on tougher sentencing, parole, bail programs --- and more importantly, programs that keep kids off the gangbanger/felon path in the first place? I read this site on and off for a few years before I joined --- one of the reasons I joined is because people sounded rational, well-informed, helpful, etc. - not the "gun nuts" I had been programmed by the media to expect. I'm not as worried as some of you about people snooping. If they're zealots, you won't change them anyway, but if they're even slightly rational --- they might find themselves looking at things differently.
  27. I’m going to build another Black Friday AR, I try to do one every year if I can get every part on sale. This year I have a receiver set already and an extra BCG from last year. So this should be really cheap to finish. First ALG for a handguard and act trigger. I’m thinking 9 or 9.5” Grendel barrel. Im also getting a BF sale on a can for it at silencer shop.
  28. From what I gather it was pretty standard thinking in the field - add on "field applique armor" that helped defend against the better guns of the Kraut tanks. But you didn't see it often. Commanders (Gen Patton for one) hated it though. Thought it looked "shabby" and "ill disciplined". He felt that men adding extra armor demonstrated that they lost faith in the armor and equipment they were issued.
  29. 1 point
    Primary Arms has these on sale. Limit is 10! Is this the lowest priced NJ compliant magazines? Black: http://www.primaryarms.com/hexmag-15-30-15-round-magazine-series-2-blk-hx1530-ar15s2-blk FDE: http://www.primaryarms.com/hexmag-15-30-15-round-magazine-series-2-fde-hx1530-ar15s2-fde ODG: http://www.primaryarms.com/hexmag-15-30-15-round-magazine-series-2-odg-hx1530-ar15s2-odg
  30. @gleninjersey I linked something earlier in this thread that shows original "net neutrality" came up AFTER some cable companies started to throttle / control. Just like you and I pay for "using" the net at home, companies like Google / Amazon / etc pay for connecting to backbones. In fact, service companies often pay by bandwidth measure and not a "$30 / month unlimited" deals that individuals are offered. "Unlimited" is just a marketing gimmick like it always was. People also quickly forget how some cable companies were fleecing customers by taking advantage of local monopoly. I dont believe fairness is in the DNA of some of these companies now complaining about net neutrality.
  31. @AVB-AMG I couldn’t resist—Woodford reserve bourbon old fashioned. Thanks for the idea.
  32. Simply put, deregulating the internet, departing from it's original open source unrestricted structure, would be like deregulating football, baseball, or any other sport you happen to still like. Anything goes. Regulation, to some degree, is necessary. what the FCC is proposing takes away consumer protections and empowers corporations to rape you. The internet, on the consumer market level, was intended to be an open source, unrestricted, means to access information. Without net neutrality, you will only see what your ISP wants you to see. Imagine what it would be like if you wanted to travel somewhere, and the person at the toll booth told you, as a matter of corporate policy, they don't want you to go to your destination because it would not be an optimally profitable destination for them and you will have to pay extra to go to your destination or they outright say no, you cannot use this road to get to where you want to because it's a conflict of interest, and block your ability to access information.
  33. Me either!! Now that the brine has cooled a bit, I put the turkey into a food safe 5 gallon bucket (available at your local Lowe’s store), along with the brine, 10lbs of ice, and cold water. Snap the lid on, and let it soak in the brine solution for at least 1 hour per pound of bird. We have a 23lb turkey, but we’ll let it soak for about 36 hours. I check the ice every 6-8 hours and refill as required. Now, we drink more wine, and we wait. Because I’m a Star Wars geek...
  34. I don';t think these cases are listened to or won based upon strategy. There are a number of justices that don't want to accept the second amendment for what it is: an essential part of the bill of rights. Until they are replaced these cases will not be heard. And if there is a good chance of losing we are better off not having them heard. As with most things with SCOTUS we are going to have to be very patient. Trump's biggest achievement so far has been his federal bench appointments. The numbers far exceed previous presidents. And for that to continue we need McConnell and a majority in the senate. By the end of hist first term he may have appointed anywhere from 30% to 50% of the judiciary. That will ge HUGE.
  35. Some pre-game photos.
  36. Ed Craft according to the PAFOA thread. He wasn't such a bad guy there. Sounds like he had a terrible end of life. Constantly falling. I did not care for Mipa here but I wouldn't have wished bad upon him. Hopefully he is resting peacefully and out of pain.
  37. I prefer BCM stuff as well. It's very reasonably priced and well made
  38. The time for squabbling between the 2A groups in our state is over! I for one, as a member of both NJCFO and NJ2AS I call on Alexader Roubian to apologize for any past discrepancies and unite with our 2A community for the common goal we all share! Alex, I was there with you on Sweeney's sidewalk, Carol deserved our support. The time has come for us to work TOGETHER with ANJRPC, NJCFO, NRA, SAW and all the other groups for our common goal. If you choose to act as a lone wolf in this cause, NJ2AS will be no more. Come together as one now or fade into obscurity! The choice is yours! As a member from the start with Frank, I vote we come together no matter the cost in pride! Otherwise, NJ2AS will become a Memory of a great cause gone bad!
  39. Yes, they are expensive but you get what you pay for and they are worth every penny. They produce quality rifles with a stand-up company supporting them. Buy with confidence.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.