Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leaderboard

Popular Content

Showing content with the highest reputation on 11/29/2017 in all areas

  1. Sent from my iPhone using Tapatalk
  2. I know. I did that. But. Its annoying to have to do that. I want my wife to make dinner. My girls clean it up. And leave me the hell alone. Im getting too old and cranky to deal with that.
  3. Since when you need permission ? :-)
  4. Well according to them, anyone who has more than 2 guns in the home is a ticking timebomb with their "arsenal" of ten firearms. If we were to believe their rhetoric of "more guns = more gun deaths" then the chart wouldn't look like this.
  5. I also shoot a 50/200 zero. Quick side note - With a 50/200 yard zero, your holdover at 500 yards should be about 36” not 52” which makes this even easier to do. I don't think you realize how small of a change in muzzle angle you need at 0 yards to create point of aim 52" above your target at 500 yards. You only need to change the angle of the muzzle 0.17 degrees to induce your 52" of difference. Or think about it this way: Say you have an Aimpoint T1 with a 2 MOA dot. At 100 yards, the dot covers two inches, at 200 yards 4 inches, 300 yards 6 inches, 400 yards 8 inches, and at 500 yards your dot covers 10 inches. If you have a 52” holdover, it is only a hair over 5 dots high. Plenty of room in that glass without interference from the front sight tower. Another way to look at it: 52” is only 4’4”. Think about how much room in your optic a 6’ human takes up at 500 yards. Add about 2/3rds the height of the person over the intended target area for your holdover - again plenty of room before your irons get in the way of your aiming point through the glass This is not the case with strict iron sight shooting. With iron sights, you are always obscuring everything vertically below your point of aim for your desired point of impact with the sight. That’s how iron sights work. At closer ranges you don't notice the sight obscuring your target because your target appears significantly wider than the front sight post because it is so close. But when you consider that at 500 yards, your front sight post is wider than the shoulders of a man, you can start to see the problems that may arise. Now, If you are using your co-witnessed sights at the same time ie: irons and red dot aligned on target (and I don't know why on God's green Earth you would do that) then yes, your front sight apparatus will obscure your target when looking through the optic at any distance because - again, to get hits with iron sights you purposefully have to cover up everything below. This will be true regardless of using BUIS or front sight tower and is one of the reasons I prefer RDS to iron sights.
  6. I hope it passes so I don't have to leave my gun at home when I visit family in NJ
  7. Here is a link to the NRA-ILA for just that purpose. https://www.nraila.org/articles/20171127/concealed-carry-reciprocity-is-on-the-move-your-lawmakers-need-to-hear-from-you-now Click on the "Write Your Federal Lawmakers" in the article.
  8. I guess if you haven't called your reps yet, this would be the time to do it? Yes, I know some people might argue, "how will this help us in NJ?" - but I think it would exert even more pressure, bolster any subsequent legal suits brought, etc. It's another incremental step forward. Besides, from a simple standpoint of JUSTICE, the way out-of-state concealed carry licensees have been abused by this state is just WRONG - and IMO it needs to stop.
  9. Was watching the broadcast from the committee, and they "Ayes" had it. I don't really know if this meeting was just to "finalize" it or "move" it. If anyone else knows, please chime in, but sounded promising. P.S. Saw Roubian sitting in the (empty) public section.
  10. Maybe for you, but the protein is only part of the dish. Last night's meal was Ribeye and roasted veggies with kale. I finished the ribeye but couldn't finish the veggies, my wife still had about 2 ounces of ribeye and some veggies left, which are packed in her lunch for today. And it's funny that you say a "good" burger. Let me tell you something, you haven't had a good burger until you've had a Blue Apron burger. We literally get giddy when we see that a burger is on the menu, because they are out of this world, on par with anything I have had from a number of gourmet places. Maybe it wouldn't work for you, but I am telling you from experience that it has been a fantastic experience for us. Here is last night's meal.
  11. At this point my wife and I have had over 400 meals from Blue Apron, I can only remember one leaving us still a bit hungry. I also think we are up to 4 meals that we felt didn't taste fantastic and 1 that we actually threw out. Pretty good record in my opinion. As to costs, we have tried to replicate some of their meals, and more times than not it costs us more to get the same quality of ingredients on our own. Blue Apron is not only convenient, it is also cost effective for us.
  12. Fancy pants food. Bah. Nothing beats a sack of rats from White Castle and a case of Schlitz.
  13. We tried Hello Fresh and Blue Apron. Decided we liked Blue Apron better. We get two meals for four people every week. Making the meals takes about 35-45 minutes and has become much loved family time. Even my 7 year old helps chop and cook and set the table with no arguing. The quality of the food has been very good and the recipes we have chosen have mostly been winners - a few I have not cared for - with a few recipes making our favorite dishes list. My favorite part is that we try different dishes and new food that normally we wouldn’t (I had Romanesco Cauliflower the other day for the first time and it was delicious) and makes us cook dishes we normally wouldn’t tackle on our own. The Little Chef: the finished product: This was Chicken with Drop Biscuits (basically Chicken Pot Pie). It was really good
  14. At 12 o'clock my newest baby a 1965 Ruger .357 3 screw without the recall repair. I only fired it once. I don't want to spoil it but it's a sweet shoot. At 3 o'clock my newest purchase a GP100 4inch. Although if you ask the boss lady she says it's her's. At 6 o'clock my most fired revolver a .357 Security 6. I believe it's model year is 1983. At 9 O'clock an inherited black powder Army Model 44cal from Navy Arms Co. Ridgefield, NJ. 1971 manufacturer date. Never fired and so far I've respected that. It's getting harder though. 3 o'clock and 6 o'clock are waiting for Santa to bring them new grips.
  15. I use a lower 1/3 co-witness (which is superior to an absolute co- witness in every way), so that may change things if you are a proponent of an absolute co-witness. That being said: 1) I don’t even see the front sight tower. When looking through my optic. 2) The front sight tower does not get in the way at longer distances (in shoot RDS our past 300 yards). Think about it, your sight systems are still co-witnessed - optic and irons. If your dot is on target, then aiming through your irons will yield the same sight picture only with the dot in the middle. No obstruction of the target by the tower.
  16. Bring your Smiths, Rugers, Colts, Taurus, Etc. Post them here! S&W 642 w/Lock
  17. Switch between Home chef & Hello fresh but prefer Hello fresh and love the cost, convenience and variety.
  18. Don;t remember shipping charge, I ordered alot of stuff with this order. new press, powder measure and alot of small stuff. it came in one big box
  19. 1 MOA??? what kind of BS is that! You can do better. Start from scratch, I'll tell ya what, I'll take that heap off your hands for half what you put into it. You deserve a sub MOA rifle.
  20. My bad was thinking NH carry. I got corn fused
  21. Nope. Stungun case is NJ2AS. They put the money where mouth is. Walking the Talk. ---------- Consistent with that prior advice, please be advised that, as of October 22, in accordance with a Consent Order entered in the United States District Court in New Jersey Second Amendment Society v. Porrino, No. --------
  22. I just donated to NJ2AS for that Stungun case. Hoping for better things to come.
  23. Finally took it out to the range on Sunday, all I can say is WOW. Took me 7 rounds to adjust the gas block from fully closed to perfectly timed following JPs instructions. From that point on it ran flawlessly for another 80 rounds. Also, once zeroed at 100 yds, got 1 MOA groups using cheap PMC 147gr ammo. I think I am liking this gun a lot better then the SPR I built last year. Also, the VG6 MB is amazing, almost no recoil or muzzle rise. I think I will put a VG6 on my savage bolt action also.
  24. Beautiful! Some of the finest guns too.
  25. 1 point
    the new Mustangs are badass for sure.... and..... I love the looks....
  26. 5 states ask Congress to swiftly pass national reciprocity: Alabama, Louisiana, Missouri, Montana and South Carolina. http://www.guns.com/2017/11/27/5-states-ask-congress-to-swiftly-pass-national-reciprocity/
  27. funny seeing the chicken pot pie thing, my wife just walked in with a dozen chicken pot pies for me, shes going to FL for a bit and hooked me up. I'm easy. And I dont cook.
  28. I am still getting used to the idea of smart phones. May be in 2025 if I am still in shape to stomach a meal by then. Seriously though, these reviews make me want to try. Always resisted the idea of "scheduled delivery" stuff.
  29. We have tried several of the meal kit delivery services, Blue Apron, Hello Fresh, and Home Chef. Mrs Tex and I have found we prefer Home Chef. We liked the ingredients better, as well as the recipe selections. They fit our calorie and palate preferences the best. We schedule a delivery once a month, just as a break from our regular cooking. It’s fun to try new dishes, a little outside the box from what we normally cook. I encourage anyone to try them. Lots of fun and good cooking!!!
  30. So just throw them in the garbage.
  31. Felt the food was a better quality, the recipes were better, and we could cancel a week here or there (going away, holidays, etc...) with less hassle.
  32. OK, I'll play. Here's my pack: Top to bottom: S&W 686+ Deluxe (357) Brand new, just picked it up from Cheyenne (thanks Bob ) S&W 617 (22lr) S&W 627 Pro (357) Ruger GP100 Match Champion (357)
  33. But is it more people buying guns? Or is it just people who own guns, buying more? What we gun owners need, more than anything, is more PEOPLE who own guns, not people who own more guns. Politically speaking, that is.
  34. http://lmgtfy.com/?q=galves+online
  35. As MOST OF AMERICANS agree with me, no body likes guns... sorry, wrong thread. It would be priceless to see certain people reaction if they were to publish stats on how ammo was bought - GAZILLION TRILLION rounds of ammo.. In all seriousness, good job folks.
  36. 357 Vaquero Birds Beak grip angle is okay, it looks hot though.
  37. Colt Agent Jay Pee holster Gun and holster are worn out. It has sat in this condition for years loaded with wad-cutters.
  38. 4 inch GP100, in 327 Federal Magnum Highly underated cartridge and platform
  39. 6 inch Python Highly overrated but very pretty.
  40. that's about the only one I could find.. shooters has one for the safes they sell. they loaded mine in the house at no cost for buying the safe from them..not sure that is still there policy.. here is one more. they have one in nj.. https://www.newhaven-usa.com/rent-stair-climbers.htm
  41. New York, California and Connecticut Attorney Generals are against the bill. I'm shocked I tell you just shocked.
  42. I have so many, but here is my favorite....................... (1977 Python - UnFired)
  43. OK, I'll share four interesting Smith & Wessons (some of these have been posted before)... First up is the one that Alec requested - and given the breadth of his competitive Smiths, I'm flattered. This is a Performance Center 627-4 chambered in .38 Super. These were made ca 2003 for the distributor Bangers. I believe that there were two production runs of 300 guns each. This is from the first run and is #214. It has a non-fluted stainless cylinder (chamfered charge-holes) in DLC black and a 5.5" barrel. It came with both a ported muzzle cap and a plain one. It has a ball detent in the yoke. I use this gun for USPSA and ICORE and as such have changed out the sights to a plain LPA rear and a Dawson FO front. It has had an action job and been converted to DAO. The grips are made by KSD. Next up is a gun that I had built in the early 70's. I was a big fan of Skeeter Skelton (a gun writer of the time) who was a big fan of the .44 Special cartridge. I badly wanted an N-frame .44 Spl. This was after Smith discontinued the Model 24 in 67 and before they reintroduced it in early/mid-80's. J&G in AZ had original 6.5" Model 24 barrels available. I bought one and then found a Model 28-2 for the foundation of the conversion. George Matthews of Downey, CA did the conversion which consisted of boring out the cylinder - including rebating the chambers and squaring the face, and installing the barrel. It had a Patridge sight on it, which I had changed to a Baughman ramp with a gold insert. My buddy and I changed the trigger to a smooth combat trigger and installed a Model 14 SAO rebound spring (this was well before the days of just buying a Wolff spring). The optic was added sometime in the 80's and is a first generation (Japan) Tasco ProPoint red dot on a B-Square mount. The grip is a custom, one-off Hogue monogrip in Micarta with brass spacer. The next two are limited run S&W L-frames. First is a Model 646, which is chambered in .40 S&W. Smith made about 400 Performance Center 646's with slab-sided barrels. Several years later they discovered left-over cylinders from that run. Smith is famous for never letting anything go to waste, so they utilized the remaining cylinders in a production run of regular production 646's with the round profile barrel with full underlug. There were appx 300 of these made. I used this for IDPA, until I retired it several years ago. It has an LPA plain rear sight and a Dawson FO front and basic action job - light stoning, Wolff springs and chamfered charge-holes. The grips are from the Smith X-frame Emergency Kit (they made an orange and a yellow one - one in .460 and the other in .500) Lastly we have what is known as a Brazil Contract Model 586-4. These are unique guns in a number of respects and it is hard to pin Smith down as to number made and how many ended up in the U.S. If you have the SCSW (Standard Catalog of Smith & Wesson) 3rd Edition and the fourth edition, you will notice there is additional info in the 4th edition - I was the source for that info. The most obvious feature is that these are chambered in .38 Special, not .357 Magnum. They have a 4.2" barrel which is the legal minimum for importation into some countries. The SCSW 3rd Ed talks about the 586-5 Brazil Contract guns which were shipped in 1993. The paradox is that the 586-4 (a chronologically older engineering change) were shipped in 1997 - four years after the 586-5's. The contract for the 586-5s was filled and the small overrun (<30) of the 4.2" guns were sold to U.S. distributors. The research that I did indicates that the second contract (the 586-4's) may have been canceled and the entire order sold to U.S. distributors, but I found nothing to corroborate this. Even if true, we are talking only several hundred guns. These 586-4's came with several features not found on regular production 586-4's. They have MIM cylinder releases (reg prod 1997) and MIM triggers (also 1997, but part of engineering change 586-6), yet retained the hammer mounted firing pin which was dropped in 1997 as part of 586-6. Suffice it to say that these are Frankenguns from the factory. This is a current IDPA gun and, again has an LPA rear sight. The front is a Dawson FO, but the original blade was integral with the ramp and base, so the blade and base were machined off and a Weigand sight base was installed that uses the interchangeable front blades. Light action job & springs and charge-hole chamfering plus the X-frame grips. Sorry if I got mired in minutiae, but that's what makes these special - besides, you asked for it. Adios, Pizza Bob
  44. http://am-revolver.com/my-equipment/
  45. Sent from my iPhone using Tapatalk
  46. Oh boy, this is gonna be good. Waiting on @Pizza Bob.
  47. 1 point
    You do not send any paperwork to ATF or any other party for long guns in NJ. As far as ATF / Feds is considered, you took possession of those rifles legally (per their own instructions). Remember, Form 4473 clearly says YOU cannot gift the firearms to an otherwise prohibited person and you cannot gift in exchange for money, services etc. At the time of this surprise reveal, have your parents fill the NJ Certificate Of Eligibility (link below), two per each firearm. You keep one copy of each and your parent keeps a copy. Also remember that when you gift the long gun, you are gifting to specific parent and thats who should fill out the COE. And you are done. http://www.state.nj.us/njsp/info/pdf/firearms/sp-634.pdf IANAL. BTW, Dont let anyone tell you all of this is a loophole. Its not. Its the law and good number of firearms change hands in face to face transactions between law abiding citizens who are not prohibited from owning and possessing firearms. I strongly suggest you pick a NJ FFL who is active on these forums. Ask for recommendations if you need help finding one.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.