Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leaderboard

Popular Content

Showing content with the highest reputation on 12/24/2017 in all areas

  1. SALT= State and Local Tax. If you itemize you federal tax return, you used to be able to ducted all your state income tax and local tax (some states have county, municipality tax...). I think states that don't have state income tax you could deduct your sales tax. In 2018 your SALT deduction is capped at 10K. However your standard deduction-assuming married filling jointly-goes up to 24K. Something like 70% of the taxpayers used to take the standard deduction anyway instead of itemizing. So this increase in the standard deduction -and the lowering of the marginal tax rates- will save them some money. This is why about 84% of taxpayers will see their overall tax bill reduced. But you would never guess it if listen to the talking heads or to the man on the street. TAX CUTS FOR THE MILLIONAIRES AND BILLIONAIRES!!!!111!!!! REEEEE....
  2. Well folks, after a quick overseas trip for work, it’s time to make Christmas Dinner. This year, we’ve decided to smoke a brisket. I started off with an 8lb packer brisket. I rarely see this one that small, but just for 2 of us, it’s plenty. I trimmed the brisket, leaving about 1/8-1/4” of fat on the back side. I removed all the hard fat, because that won’t render. Rubbed it down with olive oil as a binder, and my favorite rub, and left it in the refrigerator overnight so the rub soaked in a bit. I started the PBC this morning, and hung it. Bought a new thermometer (cause I hated the old one), this one has a probe to monitor the smoker temperature. The PBC settled about 260-265*. When the meat reached 160*, I pulled it off, and wrapped it in butcher paper moistened with a bit of beef broth. I sprayed it on with a little pump sprayer. Wrapped it back up, and stuck it back on the PBC (with the grate installed), until it hit the magic number of 203*. Once it hit 203*, I pulled the brisket off, wrapped it in a towel, and stuck it into an empty cooler...which is where it sits now. I’ll let it rest for at least an hour, probably 2. Total cook time was about 7 hours. After it rests, I’ll separate the point and flat, and slice this little puppy up for dinner. I’ll post pics of the finished meat after it’s sliced. We are saving the point for smoked brisket chili. Mmmmmm!!! For some reason the pics posted out of order. I think you’ll get the idea.... Merry Christmas, y’all!!
  3. Unfortunately I have experienced this in 4 offive gun shops I visited in Maine (six if you count Cabelas). You can quote, recite, print or explain until you’re blue in the face but if these morons don’t want to they won’t.
  4. First time we've ever been accused of that!
  5. Thank you everyone. Smartest forum on the internet.
  6. Definitely legal under ATF rules. (b) It shall be unlawful for any licensed importer, licensed manufacturer, licensed dealer, or licensed collector to sell or deliver— (1) any firearm or ammunition to any individual who the licensee knows or has reasonable cause to believe is less than eighteen years of age, and, if the firearm or ammunition is other than a shotgun or rifle, or ammunition for a shotgun or rifle, to any individual who the licensee knows or has reasonable cause to believe is less than twenty-one years of age; (2) any firearm to any person in any State where the purchase or possession by such person of such firearm would be in violation of any State law or any published ordinance applicable at the place of sale, delivery or other disposition, unless the licensee knows or has reasonable cause to believe that the purchase or possession would not be in violation of such State law or such published ordinance; (3) any firearm to any person who the licensee knows or has reasonable cause to believe does not reside in (or if the person is a corporation or other business entity, does not maintain a place of business in) the State in which the licensee's place of business is located, except that this paragraph (A) shall not apply to the sale or delivery of any rifle or shotgun to a resident of a State other than a State in which the licensee's place of business is located if the transferee meets in person with the transferor to accomplish the transfer, and the sale, delivery, and receipt fully comply with the legal conditions of sale in both such States (and any licensed manufacturer, importer or dealer shall be presumed, for purposes of this subparagraph, in the absence of evidence to the contrary, to have had actual knowledge of the State laws and published ordinances of both States).
  7. One may purchase long guns from a VA dealer. Here is the ATF Regulations you requested. https://www.atf.gov/resource-center/docs/atf-p-5300-4pdf/download
  8. The Federal rule is a long as the sale meets the requirements of BOTH states the sale of long guns only can take place. This means rifles and shotguns. Sounds like he does not want to transfer directly to you. http://www.vsp.state.va.us/Firearms_VFTP.shtm#NonResIDReq Nonresidents - Identification and Residency Requirements Rifles and shotguns may be purchased from licensed firearms dealers by persons who are residents of other states upon the presentation of one photo-identification form issued by a governmental agency of the purchaser's state of residence and one other form of identification determined to be acceptable by the Department of Criminal Justice Services (6VAC20-130-10). The following secondary forms of ID are acceptable: A current lease. Evidence of currently paid personal property tax or real estate tax. A current utility or telephone bill. A current voter registration card. A current bank check. A current passport (must include an address). A current automobile registration. A current hunting or fishing license. Other identification allowed as evidence of residency by Part 178.124 of Title 27 of the Code of Federal Regulations and ATF Ruling 2001-5.
  9. Ryan, This guy is out of his mind! He would be correct if it was a handgun sale. The only case where a rifle would fall into this is if the rifle is non PRNJ compliant and needed work by an FFL to make it compliant. As a PRNJ resident, I have purchased long arms in both PA and DE. VA is no different! Take 2 copies of the COE with you and remind him it's not a handgun.
  10. Same here. However that may change due to the current political environment. FYI Jersey CIty Mayor Full-Flop just announced acceptance of prepaying entire 2018 property taxes: http://www.nj.com/hudson/index.ssf/2017/12/jersey_city_to_allow_residents_to_prepay_2018_taxe.html Tax experts told The Jersey Journal it's not clear the IRS will allow filers to prepay an entire year's worth of property taxes and then deduct them in April. The bill does specifically bar filers from deducting prepaid state income taxes. Rachael Bell, spokeswoman for the New Jersey Society of CPAs, told The Jersey Journal filers can prepay at least the first two quarters of their 2018 property tax bill and deduct it when they file in April. "Taxpayers need to make sure that they are not subject to the alternative minimum tax, which would negate any benefit of prepaying," Bell said. "Additionally, it's possible that Congress could act in the coming weeks to retroactively disallow prepayment."
  11. Where are you based? I would be happy to knock it out for you. I did Nick's a while ago. It's the first thing I did to mine, too. Sent from my Pixel using Tapatalk
  12. I have never had this issue either and I have a few LaRue mounts on my guns, for optics and lights. I have been using a LaRue 660 T1 mount since 2009. But I have heard this can happen from a number of very trustworthy sources - I count Shane as one of them. I suspect the moon has more to do with out of spec uppers and users that don’t RTFM. Under the heading of “It has and could again, so why risk it” that Shane so appropriately stated, I have switched over to ADM for any new mounts, but I don’t feel the need to swap out my LaRue mounts. Then again, I view the QD ability as an emergency feature. I do not routinely take the mounts on and off. I install the optic then leave it. The very few times I have taken the optic and mount off, were times I needed to either work on the gun or I was swapping the optic to another rifle.
  13. This is really good advice. In a nutshell you are trying to get more refund back of your 2017 by prepaying 2018 taxes. Those who pay more than $10k in property taxes and income taxes in 2018 will get “less” deduction in taxes (but still probably do better in 2018 anyway) this stratgy only works for 2017 if you choose to submit itemized deductions in 2017 versus standard deduction. AND you are not subject to AMT. I’ve said this before you really should examine your filing to see if you are AMT. I wish I knew what line number it is. But nevertheless you need like several thousand laying around to prepay these taxes to get that “savings”. But Howard is exactly right. Yiu are “earning”. 29% on that money you prepay Other great advice. Own ETFs instead of mutual funds (better cap gains taxes) and done own bonds in a taxable account. Only tax deferred accounts. (Bond inxome is taxes at your highest marginal bracket is robbery)
  14. Here is the thing, it could and does happen, so why use a mount that can do that? Some people keep the cam lubed to try and keep it from happening but...I'd rather just use a mount that doesn't use the rail interface as a contact point that "grinds" the contact surface. Additionally, think about that methodology and how little contact surface that yields. Less than optimal when repeatability is your goal.
  15. That’s not been my experience with the Larue mounts. They hold zero between multiple on/off cycles, and should, if they are set up correctly. Your mileage may vary, but that has been my experience.
  16. Until you start cutting half moons into your rail, then it will start shifting. If you put it on and leave it on Larue is probably OK. If you move your mounts on and off more frequently, there are way better options, some listed in this thread.
  17. Actually - I just ordered 6 from Beretta USA. $24 each, then promo code PLUS25% brought it down to $108 ($18 ea). After tax (Free shipping) it's $19.25/mag - score.
  18. All of mine have a light, They are made by Muzzle Flash the best dam light Co. on Earth..
  19. I use ADM for the red dots No issues. I prefer Bobro for the long range adjustable power scopes. Really well made, beautifully machined and always have held a zero for me. Pricey though. Side note : dont order an ADM through Amazon. I did last year and regret it. When I got it I threw it in a parts box and didn’t use it for a few months. When I took it out of the box it just didn’t look like my other ADM mounts. On closer inspection it was a counterfeit mount. I couldn’t send it back so I mounted it on a cheap POS Primary Arms red dot and placed it on a seldom used AR15. Lesson learned. I love Amazon for the convenience and quick delivery but more and more I hear about bogus counterfeit items coming from them. From food to high dollar goods. Caveat emptor.
  20. So. For us common folk. Please explain what a salt deduction is. Gracias
  21. Call your town office, mine only allows me to pay the first quarter
  22. Send it to Cylinder and Slide. They did an awesome job on mine and it was worth the wait. If you can live with just the cuts for the sights you can send just the slide and they'll turn it around quicker and you'll save on shipping. Sent from my Pixel using Tapatalk
  23. I hope that's his aim that sucks and not the gun. I'd probably strip down the gun and take that external safety off. Safety first.
  24. Use a post-it note, works for me. Then I don't forget.
  25. update on shell holders The Lee shell holder does fit the Frankford Arsenal tool. As mentioned by Tony the diameter is .811 and will fit into the tool. The frankford holders are .785 The thickness is a few thousands more than the FA but I should be able to set the adjustment to compensate, If not i'll just file off a few .000 once I prime some I'll post so if anyone else needs this info. Update, I loaded 100 .45 auto rim with the Frankford tool with a Lee autoprime shellholder and all loads fired fine. Have been using an old RCBS hand primer for the last 30 years ( still works fine ) The handheld auto primers with the primer trays are good as now I just bring my loading kit to work and sit in my truck and prime all my brass during the day without having the primers spill all over. Thanks for the replies.
  26. loose lips sink ships. and for the record.....the kind of stuff we're talkin' 'bout here is why i don't want a smart tv
  27. Take it as you like. That’s on you. I have knowledge, experience, and training opportunities concerning the shooting of AR pattern rifles over the last 15 years that doesn’t mirror most folks. That includes regularly shooting in armor and kit and training others to do the same - I teach both techniques. I was merely stating that believing that a high knee prone position is an outdated technique is shortsighted. The high leg didn’t evolve into flat iso. Flat iso has always existed. Look at pictures as far back as WWI, (maybe even further but I only did a quick google search) you will see soldiers in a flat iso position. I have never once said any way was THE way to do anything - shit, I shoot flat iso when out of kit. I shoot flat iso sometimes in kit. My whole point in my statement regarding high knee was there was more than one way to do something. The situation will dictate. Everyone’s frame of reference is different - many people forget that. I believe I said everyone’s needs and capabilities are different - I just went back and checked - yup, that is in fact what I said. That statement stands true. Sometimes flat iso is right, sometimes high knee is called for. As such, a high knee shooting position is still taught for a lot of applications and is most certainly not outdated. Oh, and I don’t need to be leery of anyone I have trained with - their pedigree is unapproachable. Looking back over the last few responses, out of the two of us, your statements were more towards the “final word” spectrum of the discussion.
  28. Yes NRA & CRPA have already filed suits on multiple grounds. Including violation of Interstate Commerce and Second Amendment Rights on the grounds Prop 63 will limit their access to ammo which the Supreme Court has previously ruled the Ammo for Firearms is also protected under the Second Amendment because without Ammo they can not be used for their intended purpose. They are hoping for another injunction. Sent from my XT1585 using Tapatalk
  29. Note to self; add post-it’s to range bag.
  30. $19 For the Magwell insert - http://www.berettausa.com/en-us/beretta-cx4-magazine-insert-for-px4-series-not-45acp-/c5c620/ $29 for the Mag Release - http://www.berettausa.com/en-us/beretta-cx4-storm-magazine-release-px4-series/c89210/ If you're on the beretta forums there's a discount too (find it there)... I converted mine a while ago. Also got some additional rails, a 2nd charging handle (so I have 'em on both sides now), and a barrel shroud (Not the Beretta one).

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.