Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leaderboard

Popular Content

Showing content with the highest reputation on 01/02/2018 in all areas

  1. I can make pex look pretty neat. Gotta snap lines. And take your time. Sent from my SM-G900V using Tapatalk
  2. Removed the illegal links. We do not condone that sort of thing here. While yeah you can save $40 bucks on the software, do you really want to risk it vs getting infected or PII stolen? If turbotax is too expensive, look at H&R Block Taxcut.... I use it, myself.
  3. Is it the new model Murphy1000? I hear with those once you put your guns in you can’t get them out.
  4. I've seen some pretty amazing pex jobs. You would be surprised when a guy with OCD and plenty of time on his hands runs pex what it looks like.. I'm anal about my roughs looking perfect, regardless of what material I'm using. Here's one I found that an engineer did on his own house. I refused to service it lol... Sent from my SM-G900V using Tapatalk
  5. Legally according to the National Standard Plumbing code 2015 adopted by the state of NJ. They allow us to vent tubs and showers this way. But not sinks, unless we have to, because there is no other way. Island sinks are usually the only exception. Beyond that it's up to the Authority having jurisdiction. Which is the township inspector. So that means when I turn in my riser diagram with the plans for a permit, he has to approve it before we can pipe it that way. It's completely in his hands. But a sink against a walk he will want the drain in the walk. If it's an outside wall the water lines must come through the floor. That's the way it is statewide, with very little exception. If the walls are 2x6 construction we can put the water lines in the outside wall as close to the inside as possible. But I'm not a fan of doing that either. Sent from my SM-G900V using Tapatalk
  6. The old school way creates an S-Trap. That's illegal to do now. That type of trap looses it's prime. Sent from my SM-G900V using Tapatalk
  7. Info's going to the builder to address.
  8. Remove the trap. And stick a shop vac hose over the drain. Let it blow warm air down the drain for about an hour. That's how I thaw frozen drains in people's houses. It works. Sent from my SM-G900V using Tapatalk
  9. I’m not quite sure why you’re defrosting pipes in your brand new home.
  10. Old CRT Monitors were nothing to mess with - those capacitors held some serious power.
  11. I will never forget my first monitor repair in 1998. I may have pooped in my pants a little bit.
  12. Cut and sew. Sent from an undisclosed location via Tapatalk
  13. Even if the floating zero issue has been resolved, you still have a badly designed battery box prone to rupturing batteries, shitty battery life when compared to other viable options out there, and a stupid auto shutoff feature that can’t be disabled. This all graciously provided by a company that purposefully hid known flaws in life saving equipment from users that depended on said equipment to keep themselves and others alive. No thanks.
  14. fixed... kidding.. well kind of.. but I am at least curious as to why you would remove anything to clean the gun? I mean on the off chance I do clean my AR (which is VERY infrequent).. I am running a bore snake through it.. cleaning the bolt.. and hitting with some light lubricant.. the process takes next to no time.. and is not complicated in any way..
  15. As GRIZ said, your relative has to take it to the FFL. You can't legally posses it yet so how can you go to an FFL by yourself to transfer a firearm to yourself that you can't yet have? I know what I would do if were in your situation but If you can find an FFL that will do the transfer, go for it! Even at the higher price. There is a risk on both sides!
  16. I got mine last year for Xmas. Use it almost every week for an hour. I'll swap out the battery just because its been a year but its still going strong. YMMV
  17. Don’t remove your optic to clean your gun. That’s unnecessary and just plain silly.
  18. I agree 100% about CPVC. Toll started using it too along with T-Ply as well. Not sure if both still do but Toll was using both on $700k-$1M homes. Funny story. Ryan optioned lots in Marlboro from Meiterman; before his conviction. Inspectors saw T-Ply and CPVC and refused to allow it. However code did allow it. Inspectors told them how long it would take to schedule inspections and Ryan agreed to use plywood sheathing if they could use CPVC. Inspectors relented. The model house with finished basement was one of the CPVC pipes that I saw fail. 4' Crack right down the middle of the pipe. Finished basement ruined. Ryan ended up only selling 3 houses in 9 months. Meiterman threw them off the site and finished the job himself. Sent from my XT1585 using Tapatalk
  19. I have to dig up some domestic pex roughs I've done. They're straight, neat and clean. But I also prefer copper. I'm old school too. The only thing I'll do with CPVC is rip it out to replace it with something else lol. Sent from my SM-G900V using Tapatalk
  20. On houses I built myself what I did was built a double wall in order to still come up in the wall. I also over built the houses with 2x6 Exterior walls and 2x6 interior walls at diverter wall. I wish every builder did the same. Then again I only spot built. Sent from my XT1585 using Tapatalk I'm sending that one to my father. He will get a kick out of it. Sent from my XT1585 using Tapatalk
  21. You plumbers realize most of this trap talk is between just you. most here probably have no idea what your talking about. LOL
  22. That is a retrofit recirc pump that uses the cold water line as a return. So it is circulating water in both lines. I've honestly never looked into one before. I'm curious how effective they are. I've always installed dedicated recirculator lines with pumps or added instant water heater at fixture. I am curious about it myself. Sent from my XT1585 using Tapatalk
  23. Will this work for the cold water line too? Just looking up more info - the recirc won't work with PEX as there's no furthest line - it's all home run... Won't work for the cold water either unless I get 4 of 'em. One for each line.
  24. Again. I wouldn't make it a permanent thing. For now it's helping. But address it properly asap. Sent from my SM-G900V using Tapatalk
  25. It’s jus a resistor.
  26. It does when it malfunctions. Happens a lot. Sent from my SM-G900V using Tapatalk
  27. Supplies can't ever go in an exterior wall. That's when we can come through the floor. I don't come from the ghetto. I don't use mechanical vents even if they're now allowed since the last code change. They're garbage and I refuse to install one. Sent from my SM-G900V using Tapatalk
  28. 1 point
    If anything, make a bunch of common magwell adaptors for all the big name pistol companies. Not just Glock.
  29. If I had to do it again, I would get the all black version. The side saddle would cover the beautiful finish and I like the look of the gun as is. GG&G makes a rail section that fits over the extension tube and under the cap. It too would look funny. She is gonna probably stay as is.
  30. Great temporary solution. Not a permanent one. That heat trace tape burns down a lot of houses. Sent from my SM-G900V using Tapatalk
  31. Supplies can not be run in floor by code unless necessary. Only really necessary if there is an outside wall. If beam in way come through floor and break into wall under vanity in toe kick area. Sent from my XT1585 using Tapatalk
  32. Dude, let the faucet drip/trickle. It won't freeze if it's moving. Also I know how to fix that even in an unheated space. Without moving pipes or adding heat. Install this. Fixed! Plus you will save water, and never have to wait for hot to come up to the faucet. https://www.afsupply.com/grundfos-595916.html?gclid=CjwKCAiA-KzSBRAnEiwAkmQ1521-WJQm3rbZUFR1Wg7b7AMZaGUoTcWuByuawyY9pjOAmm6A2L5DmRoCm-gQAvD_BwE Sent from my SM-G900V using Tapatalk
  33. Some plans call for a bathroom above an unheated garage. Personally I refuse to pipe it that way, unless the customer or builder signs a release that removes any liability from me when it freezes. Same with running baseboard heat into a soffit area, on an overhang or cantilever. I won't do it until I can't be held liable. Sent from my SM-G900V using Tapatalk
  34. Hair Dryer blowing into hose or pipe if you don't have large shop vac. I will also use heat guns blowing onto the pipe but be careful not to melt plastic pipe or start a fire. Sent from my XT1585 using Tapatalk
  35. And no outside walls even if it is a conditioned space. Usually takes 2 days sub 20 degree temps. However if the wind is blowing cold, pipes can freeze in a day with 30 degree temps. All it takes is a small penetration. This cold spell we are in anyone's pipes can freeze. Some have frozen for the first time in 20 years since the home was built. Sent from my XT1585 using Tapatalk
  36. It's in the code. We must protect pipes from freezing. I personally refuse to run plumbing through any unheated space, including through a garage ceiling. Unless the customer agrees to let me heat the garage. It's that simple. Sent from my SM-G900V using Tapatalk
  37. 1 point
    Why? Plenty of proven platforms out there that aren't fugly.
  38. It's already on my list of items that the builder needs to address. If my fix is what was needed, then I'll see if he can reimburse me for the equipment.
  39. It's not easier to defrost. I can't use a thaw machine on it, if it's plastic. It's harder to thaw. But less chance of a split. Sent from my SM-G900V using Tapatalk
  40. My last house was a 2 story 1910, my brother lives in NH in an early 1800's house (post & beam on granite foundation). For me, I put another layer of insulation in my attic (on the attic floor) and built a cover out of rigid insulation for the attic stairs. Basically a box that covered the pull down stairs opening. I had forced hot air and got a 30-40% increase in airflow just by sealing all the ducts in the basement. Also closed off some of the 2nd floor heat registers and ran the ceiling fan in the bedroom 365. My brother gets most of his heat from a wood burning stove, but as others said, you need to control the heat with fans. He put up a cheap set of french doors to close off the stairwell and uses those little triangular corner fans in various doorways to direct the heat.
  41. I've never been a fan of machines like Kerig and Nespresso; however, the only Nespresso pod that I can tolerate is the Espresso version. I'm not a coffee snob but I've just never felt like the stuff that comes out of the machine has the same flavor as "real" brewed coffee. Just my two cents, but I'd return the machine and pick up a Chemex, some filters, and a decent burr grinder. It only takes 4 minutes to make a full pot and is not as labor intensive as you might think. I tend to use medium to medium dark roast beans and it comes out perfect for me to drink without any milk or sugar. If I want to make a single cup, I just use a V60 pour over dripper (https://www.amazon.com/Hario-Ceramic-Coffee-Dripper-White/dp/B000P4D5HG/ref=sr_1_3?s=home-garden&ie=UTF8&qid=1514895216&sr=1-3&keywords=v60) Here are the tools that I use: https://www.amazon.com/Chemex-8-Cup-Classic-Glass-Coffeemaker/dp/B000I1WP7W/ref=sr_1_2?s=kitchen&ie=UTF8&qid=1514894830&sr=1-2&keywords=chemex https://www.amazon.com/Chemex-FS-100-Filters-100-Chemex-Squares/dp/B000N4W2SG/ref=sr_1_4?s=kitchen&ie=UTF8&qid=1514894830&sr=1-4&keywords=chemex https://www.amazon.com/Cuisinart-DBM-8-Supreme-Grind-Automatic/dp/B00018RRRK/ref=sr_1_5?s=home-garden&ie=UTF8&qid=1514894917&sr=1-5&keywords=burr+grinder https://www.amazon.com/Hario-Buono-Pouring-Kettle-1-2L/dp/B000IGOXLS/ref=sr_1_14?s=kitchen&ie=UTF8&qid=1514894830&sr=1-14&keywords=chemex
  42. Happy New Year everyone. Back to reality after a nice four day break that went much too quickly.
  43. I'm 3hrs south of Myrtle Beach in the country. So I don't know how it is currently. Video poker places are gone, the bible thumpers took care of that. Full reciprocity NC/SC now. SC CWP is good in almost all "free states". In my travels north the only places I worry about are MD and of course PRNJ.
  44. Laser Eye in Paramus told me I was not eligible and sent me away. They did all the testing and no charge. I gave them big credit for not lying. Pretty good outfit. Sent from my iPad using Tapatalk
  45. A lot of people get wrapped around the axle about the dot not being crisp. So what? I see a bit of a smear myself in my RDSs - Aimpoints, Holosun, and RMRs. It doesn’t hamper my ability one bit. Secret of the universe # 2388: A dot that isn’t crisp doesn’t matter. First, turn down the brightness a click or two. It reduces the bloom and cleans up the dot. Then pick a portion of the ‘smear’ or comet or * or whatever you see, and use that as your aiming point. Zero to that point on the reticle. I pick the 12 o clock position of the top edge of the dot as my precise point of aim - consider it my “crosshairs”. If i need to be precise - I bisect what I want to hit with the top edge of my dot and I am good. If speed is more important than precision I can place the whole dot on my target. Doesn’t matter if I have a dot, a triangle, a smear, or a comet. Yes, if I had my druthers, I would choose a clear crisp aiming point in a reliable optic, but I know it isn’t necessary. I will choose a more reliable system with a dot that is less than perfect all day long.
  46. Not addressed to you, but ONLY a general response to the highlighted sentence: I highly doubt we have the numbers as evidenced by the actions of some here typing that they're willing to let a 59 yr old woman rot in jail! Unless & until some of the Neanderthal thinking is expunged from our ranks, I fear we'll never be able to set-aside differences of OPINION and answer a call to ACTION! Truth be told it's demoralizing and a huge distraction! If tomorrow the Coalition decided to march on Trenton with pitchforks, and we advertised it on social media as well as the forum, a very small percentage of you would hear the sortie signal. Why? Because you're not a member of the Coalition or even bothered to sign-up with us to get a FREE email from us! How effing STUPID is THAT? Trying to communicate to "gun people" is worse than herding cats! "No one showed me!" & "No one told me!" in today's world of instant communication doesn't cut it. Stop acting like you're still in Kindergarten & register for the SORTIE SIGNALS of EVERY 2A group you can spell the letters of! I don't care if you don't like or agree with me or like or agree with a group, "my" group or ANY group! In fact, I'm not here to be liked. It's not my job. My job is to INFORM. My job is to suggest a pathway so as to enable you to STAY INFORMED. My job is to "herd the cats"! What you choose to do with the info, news, commentary of factual circumstances I type about are entirely up to YOU! But whatever you do, don't come onto my "news broadcast" & suggest American Citizens spend 7 years in jail because YOU can't take your playtoz out & carry them! If any of you come up with "ideas" on what I should be doing, be prepared to be asked to JOIN THE TEAM & get some playtime in and get that uniform DIRTY in this 24/7/365 football game of NJ's Second Amendment scene. What have YOU done for YOUR RIGHTS today? Joined a 2A group? Donated? Wrote an article I can use? Volunteered to join a committee? Sign-up for a FREE effing email? For Christ's sake, DO SOMETHING! Signing this rant as tired & frustrated, yet VERY appreciative for everyone that cares enough to listen. Cares enough to sign-up for an email. Cares enough to JOIN(?)! Rosey
  47. Ray, you don't seem particularly well versed on the topic and you don't seem to care for this type of mount so I find myself wondering why you are posting in this thread. There are MANY reasons for QD. With My setup I can have my rifle setup for 800 yd shooting and in 5 seconds reconfigure to go CQB if I choose, or reconfig again for a NV setup. My "kit" leaves me with many options based on the emerging need. Sometimes I use QD just for the simple convenience. I even use QD on my precision rifles for that very reason.
  48. Huh? *BUY* once fired brass? Shoot spend some time at the range and anyone whom is shoveling their brass up to toss - just ask if you can have it ! Works for me............... be the brass whore - embrace the sickness of brass hording.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.