Just did mine last summer in trex transcend. Your price in the 7-9k range for materials is pretty close. My 12×20 was about 11k in materials including lights stairs and drainage system. Includes the wood and brackets as well.
You can draw out a complete deck plan on the trex.com site for free. I used that for the permit in Vernon. Pretty cool system, you design it all online, add stairs, railings, add lights, swap colors, etc. When done, get 10 page pdf with material list, 3d image, etc via email.
Had a contractor frame it out and lay the footings, I did everything from the joists North including railings and cap and stair lights (12v plug, no electric permit needed since we had an outdoor outlet already).
The trex transcend is about 90 bucks a 20' board at the place on 23 you mention. The max length is 20', so consider a 2 row picture frame layout. It looks nice, allows you to use the 20' lengths but cut a foot or so off each edge so its square. You do need to build a ladder type PT frame under the end joists for support, but then the layout is easy.
I did the grooved boards with the trex clips. The clips alone will be a few hundred bucks.
I did the trex drain system as well. Pretty slick system, adds about 1000 in materials with trough material, funnels, tape caulk, staples, etc.
The railings are simple, the trex layout designer tells you how many sections are needed and what to buy. And plenty of you tube videos were helpful.
I disagree about the trex getting to hot to walk on. It gets warm sure, but a pair of boat shoes or flip flops on those blazing hot days is an option. On an average summer day it's not bad. 100 degrees in direct sun, yeah it, as most composites and even PT wood, will roast your tootsies!
Worth every penny not to have to stain, seal, etc every few years.
Good luck