It's shit. It's poor at corrosion protection, and not a particularly good lube. The sample I had, I would even argue promoted corrosion. There's tons of corrosion tests online with carbon steel bits. In every one of the militec-1 performs like shit, which mirrors my experience.
My $0.02 cents on gun care products.
1) Don't rely on CLP type products to protect much. They peak at mediocre at everything except maybe lube, and IMO you need at LEAST an additional C product for cleaning. Once you do that, there are better performing products at lubing, protecting, and both at once than CLP products. My main objection to them as lubes is that if you are going to put anything up for a month or more, many of them are essentially gone when you pull them out, and there are a ton of price competitive products that won't be.
2) The one's I warn people about.
-Boeshield T-9. This, IMO is a P and only a P unless you are cleaning before and after range trips. While initially it is a decent lube, left in the safe it gets quite gummy. Not horribly sticky, but almost resin like. KEEP IT AWAY from fire control bits. I used it in the trigger group of my 1911 and it gummed stuff up enough that it caused safety issues. IT does still get used on my blued guns when they get put up for a while, but only externally as a protectant. It's a decent protectant for the off season, and much easier to clean off than some others.
-militec-1 As stated above. Crap lube, appears to cause or assist corrosion in my case. Hate it.
-froglube. The paste, which I wanted to like, just doesn't work well. It's either a paste not providing much lube, or it's gone after things heat up. The liquid is less objectionable, but is a poor P and a marginal C. As a lube it is ok, but the price is stupid for the level of perfromance. Don't waste your money. Breakfree CLP does a better all around job. Well old breakfree did. Post 2006, it seems to be crappier.
-eezox. This stuff is not a very good lube. As a protectant, it has issues. Yes it works. No it doesn't protect for long durations. It's kind of pricey, and the main use I put it to now that I have some is as a quick wipe down on the way out to the range in warm weather, and when I come back. It keeps the corrosion from sweat to a minimum. As a lube it is just too darn thin to stay put in any quantity. And as an L and P, it's too volatile for the thin film left behind to last very long.
3) Cleaners. I have yet to run into one that is really shitty. Do read the warnings about what surfaces the cleaner is safe for though. Most do a decent job and those advertised as carbon cutters do tend to work a bit better on carbon buildup. Those that advertise as copper solvents do work better at that.
Usually I pick up some butches bore shine locally. I got some m-pro 7 cleaner for free, and it seems to be a decent less smelly option.
4) Things I replace when I run out.
FP-10 It's a nice thick oil. Not too pricey. Good L, ok P, marginal C. Smells OK too.
dri-slide. It's a decent dry film moly lube. This is not for people who like their guns to always be shiny clean and makes field stripping your AR a bit of a mess.
slide-glide lite. The slide glides are very nice greases. The lite will work down to about 20F in most guns and still stay reasonably greasy up to about 100F (probably higher, that's jsut the range I have personally used it in). It's an L. No C other than it tends to trap carbon particles and keep it off your gun's surfaces where it is applied, and no P other than being a physical barrier where applied. If I put this on one of my novelty/curiosity range toys, and it sits in the safe for a year, it'll be there doing it's job when it comes out.