@EngineerJet:
I think that there may be a more important concern for you in order to achieve your goal of creating storage space up in your attic.
That concern is whether or not your 2x6 joists that are set 16" o.c. will be adequate enough to support the added weight (live load), of whatever you ultimately put up in your attic. Do you have any idea of what wood species your 2x6 joists are, (such as Douglas Fir or SPF...), since that also is a contributing factor in the strength of the wood and its load-bearing capacity? If your house was constructed using traditional wood balloon framing then the original purpose of your 2x6 ceiling joists were to tie the perimeter walls together and neutralize the tendency of the roof load to put pressure on, or thrust the walls outward. Since they are 2x6's, they may not have been sized for also being able to support an additional live load that would come with occupied or storage use. The critical dimension in determining that is the clear, (unsupported) span of the 2x6 joists. If the span is too long then the added load (weight) of whatever you plan to store in your attic may cause those joists to severely bend and deflect which would then noticeably deform your drywall ceiling in the rooms below, maybe even creating a safety concern. You may want to consult with an Architect or Structural Engineer to determine whether your existing 2x6 ceiling joists are adequate to support the intended load in your "new' attic space, or if you should add a deeper wood joists, (i.e. 2x8 or 2x10, etc...), at the same spacing, if your clear span warrants that. Also, I would use a minimum of 5/8" plywood for the floor sheathing, but would agree that 3/4" is preferable to avoid deflection.
AVB-AMG