Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leaderboard

Popular Content

Showing content with the highest reputation on 06/18/2020 in all areas

  1. I have one that i made myself out of an old circular saw blade. Its pretty dangerous because I dont have any guard on it but it works really really well for clearing heavy brush and would probably work equally well for rioters.
  2. There is a procedure for starting them.. i hope you followed it! You pull on full choke 1 or 2 times, and then move to half choke and it should start right away.. if you kept pulling at full choke you flooded it.. I have the ms271. I had a similar experience until I figured it out, and I mean very similar like I wanted to return the damn thing... starts on 3 pulls now. 2 to prime, one to fire up. With high and low carb adjustments there is no reason to have starting and running issues with them. I do recall some people complaining about the chain oil feed clogging, but never experienced it, at leaet mine eats through chain oil pretty regularly. Then again I cleaned it pretty good every time I sharpened a blade and flipped the bar. I think this is pretty normal for all chainsaws, and can be effected by different types of wood.
  3. Did you check the oil channel? They get clogged with sawdust on every brand I have seen. It should be part of your maintenance cycle to clean that muck out of there.
  4. Welcome from Middletown. I second the recommendation to first rent and try out a handgun before purchasing. It is helpful to see how the gun feels in your hand under recoil while shooting. Regarding the S&W 15-22, I have had mine for 5 years and it has been a great fun gun to shoot at the range. Have shot approx 3,500 rounds through mine with rarely any issues. I almost exclusively shoot CCI AR Tactical and Mini-Mags thru it. Garden State Shooting Center (now known as WeShoot) in Lakewood has a good selection of rental firearms. I also have purchased most of my firearms there. As mentioned above, Howell Gun Works is a good place. Also, Legend Firearms (Ira) which is located inside the Union Hill Gun Club (in Monroe) where I am also a member. Also recommend you look into acquiring a NJ Hunting license. That will enable you to shoot your long guns at the wildlife management areas. (Shooting the 15-22 outdoors is the most fun.) Fyi, Podcasts I listen to include: 1) Gun for Hire (NJ specific), Gun Talk, and American Armed Radio. My favorite Youtube channels include: hickok45, sootch00, IraqiVeteren8888, Paul Harrell, and gunblue490, among many others.
  5. Bru and Cin are in. Thrower 20 gauge .410 gauge clays and shells. Nick we may join you at the rifle range too if that's OK.
  6. That is a ring crimp to hold the bullet in the casing. Seems kinda low on the brass. I would toss them. There was some WWII surplus ammo with a crimp like that from 1942. What are the head stamp markings on those? Post a pic of the head stamp. One thing for sure, you did not do that crimp. That looks commercially done.
  7. Somebody started a thread about guns...
  8. Glock 17 Gen 5. Can't go wrong with a Glock. Done. Unlimited aftermarket parts and accessories. Easy to shoot, easy to maintain, will outlast you, excellent resale value.
  9. Dunno, Mrs pot. Plenty of people shoot with me on the regular, and they are also done with the forum . But what do I know
  10. "Find it and they will come" or so the movie line goes. Welcome Chris
  11. I have a number of MSR stoves. The only one I bought new was a 1st gen. Whisperlite. I don't use it much and it stays in my truck kit. It's not the multi-fuel version, but I am sure it would burn unleaded in a pinch. I much prefer my Simmerlite and its caniser fuel twin, the Windpro II. The Windpro goes on most day hikes and such and takes canisters. I have a Rapidfire as well that also uses canisters instead of white gas. Zeke, the Dragonfly is too noisy but would work better than the others with larger pots. The Windpro/Simmerlite works the best with smaller pots. The Colemans are for family car camping, though. I have finally picked up a 3-burner 426D and restored it and love it... one burner for a percolator and the other two for a griddle.
  12. It may vary by range RTSP allows you to rent alone if you have the FPID. https://www.rtsponline.com/new-to-shooting/ Gun for hire does too but you must bring your own firearm as well. https://gunforhire.com/why-rent-guns/
  13. Call ahead. People cap themselves with rentals and the local ranges are tired of mopping up. It’s joisey, nobody is happy
  14. This is a 7 year old thread. @Midwest hasn't logged in for the past 5 years. Nice try though. Reading the Sills hearings would only get your blood pressure up and make you NOT WANT TO WAIT until you get to the range to turn ammo into noise, smoke, fun and a little destruction.
  15. It was the marine
  16. I got the jetboil as a gift and really like it but I always buy MSR equipment because they make great stuff and are a really good company. I got a free pair of snow shoes for my daughter but all the straps were dry rotted. I called to get a replacement. The girl that helped me said normally it would be 18 bucks for new straps but "kids are awesome and need to get outside so I'm sending them for free" Her sending me 18 bucks worth of straps now gained a customer for life so I went out and bought MSR snow shoes for my wife and I and they weren't cheap.
  17. All of these companies make cheap versions of their products, Stihl probably offers the greatest range in quality vs pricing... I wont buy anything but stihl after using their orange head products, which is anything above their residential lines. I buy all my products out of Power Place in Rockaway and they gas and tune everything before it leaves their store. I think ECHO is a great brand for the residential line up of products and fits a lot people needs well in that price range, but if you up your budge Stihl will most likely have much better offerings in their Farm and Professional line ups.
  18. https://www.njsp.org/firearms/firearms-faqs.shtml #s 2, 9, & 19
  19. I picked up an Echo PAS unit last spring, you can swap out the heads as needed. I have the string trimmer and a blade holder one. I can attach various style blades to it based on what I need it for. I've also picked up the chainsaw/pruner attachment, extension pole & blower for it. Was so happy with the easy & reliable starts last year and beginning of this year after it sat all Winter that I picked up an Echo chainsaw this spring. The Echos have not given me 1% of the trouble my Stihl equipment used to give me.
  20. A barbers brush is all you need. @Handyman my go to for untreated ( non lacquered or poly) wooden handles is linseed oil. Butcher blocks, bowls, cutting boards etc is mineral oil.
  21. I would make sure that you do not use too much gun oil on the metal. The oil can soak into the wood and make it very soft. I have a 96 year old Winchester and have wiped the stock wi†h lemon furniture oil once.
  22. The right is beautiful
  23. My answer is NO! When your life is on the line, you are dependent on a paintball gun? When the PoPo pulls up, looks like a real handgun, you get shot! Picture an intruder in your house and you pull your paintball gun! Intruder pulls out non paintball gun! End of story!
  24. I’m in if @Displaced Texan or @DirtyDigz can make it. I need to buy their boolits. as I understand Greenday is shooting with Krdshrk and Peel sooo we should all congregate social distancing separately
  25. “Wawa believes Black lives matter, and we have posted signage sharing this message in our stores,” she said in written statement. “This week, we are also providing our associates with pins as a way to express their support for Black lives matter within uniform guidelines, if they choose to.” When an associate declines to wear the pin, they'll be labeled as a racist I'm sure. When will they hand out the Blue Lives Matter & MAGA pins? This is so disappointing. Source: https://www.nj.com/burlington/2020/06/wawa-revisits-uniform-policy-after-worker-told-he-cant-wear-black-lives-matter-mask.html There's other articles on the web that show the mask he was wearing also. It was not subtle.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.