Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Leaderboard

Popular Content

Showing content with the highest reputation on 10/07/2020 in all areas

  1. There are federal standards for anything under 16". There are no standards in NJ beyond that. IT just has to be "permanent" No one is going to check a muzzle device with their hand to see if it will unscrew, even a removable one will require a tool, so I'm unsure why that is a standard measurement being used above. Maybe they will look for a pin or weld mark, but I'm gonna guess that anything in question will be confiscated for review. No one just walks around inspecting rifles for no reason.
  2. Fail Double fail. Imo The pin must anchor to the threads via a hole in the barrel The depth of the hole should be sufficient to destroy the threads should be twisted off .. Imo
  3. I used a VG6 Gamma which had a hole already drilled from the factory, we used a pin, cut off the excess, and put JB weld on it. That was under the supervision of a former Chief of Police and by a gunsmith LOL...so I guess it passes muster.
  4. It's actually due to air...... but not what you think The Chrome Moly chassis are designed to flex, and the area in front of the driver compartment is where at lot of flex is meant to happen. When the chassis bows..... it actually allows more pressure to be put down on the rear tires..... This weekend in St Louis the weather was beyond exceptional for making horsepower..... cold dry temps..... the air density was at or below sea level..... This is where these engines can make over 11,000 hp ...... add that to the dense air that will allows the rear wing to generate over 4000 lbs of downforce..... No usually .... even with all that downforce..... the rear tires will still have slippage .... its normal.... But with the unusual conditions teams were having trouble getting enough wheel slippage...... so with all that being said..... all these forces played a roll in just finding a weak link...... and bending the chassis beyond what it could take that day..... and the car snapped in half... Thank god for all the safety precautions that the NHRA put out..... Leah walked away from this...... Now.... there have been times in the past where Top Fuel cars have had a " Blow Over" ..... it does happen when the front wheels get in the air and it will catch the car and blow it over....... this was not the case here.... Truly the perfect storm of very high HP conditions, Dense cool air, and way too much track grip.....
  5. A crazy idea, I know, but has he tried leaving a note under the windscreen wiper? No need to be rude - the guy might just not realize that he's pissing off the land owner.
  6. Just picked up a Winchester 94 1971 NRA Musket today. Figured I need a 30-30 in my life. Has a 26 inch barrel and a 7+1 capacity.
  7. Tapping a pin in does absolutely nothing if the threads aren't drilled to counter sink the pin. You can find out easily... grab a wrench and screw it off... it would take an incredible amount of force to strip the threads if the pin is counter sunk. Most muzzle devices are torqued on with a crush washer, maybe 40lbs of force.
  8. True story: back in the early 90's I did on-call work for the IATSE stagehands union at the meadowlands and was lucky enough to get called in for the Van Halen show. I was assigned to unload the sound equipment truck and had the good fortune of being the one to unbox and setup Eddie's speaker cabs on stage. Sammy Hagar was hanging out pre-show with the crew the whole time back stage (he was very cool). I remember Eddie making a grand entrance right before show time as his limo pulled inside the arena and he got out of with Valerie. Here is the t-shirt we were all given to wear for the show:
  9. As the weather cools off we get back to training. IMG_1607.m4v
  10. For sale: Original Barrel and receiver matching 1950 Browning A5 with Polychoke/Compensator - as well as Browning butt plate - made in Belgium with all Belgian Proofs - no dents in tube and bright and shiny - well taken care of. All original in the 300K serial range - no dents to the tube *fully* functional. Used sparingly, surplus to my needs. First ' unconditional ', I will take it get's it - then followed by PM. Asking $775.00 450....OBO - fee is on me, you pay NICS - transfer at Highland Lakes, *will* ship to your FFL for actual cost of shipping and insurance in state, if you do not want to take a ride. FID etc. ALL REQUIRED
  11. I got an email from them a few days ago saying they’re sending me a free gift. Hmmm. Ok. got it today. Ammo can embossed with target sports on the side. Ok. Cool. But. Then i opened it. Ts patch. Federal sticker. Ts sticker. Blackhawk dual mag pouch 10 rds of hornady 165 gr gmx. With a letter of thank you for ordering from them over the years. Now there’s a company that’s showing customer appreciation. Although they pretty much have nothing in stock. That company will retain my business when this shitshow subsides. thank you Target sports USA
  12. ....1951ish..... I think She's broken though.... Safety on, hammer down? What the...? Some would say a fix in search of a problem....so far it is interesting and has provided a positive safety and a clean break.. Range experience coming...
  13. Always, thought the M1A could do great work with just a reddot the more i thought about it from watching Blackhawk Down. You can research but Shughart used an M14 with Aimpoint red dot for aerial sniping... Always wanted to get mine 'scoped' up and never did, till a mount came up - thsnks @Dave Archibald.... Well all mounted up, blue loctite, bore sight zero with laser to 50 yards.... After this weekends two wheel trip to VT.. will get to the range a d see what she can do.... minute of man at 200 would be ideal
  14. I like the Burris rings to be honest. you get a solid locking point that won't break the bank
  15. good, nice, but I think the p-01 wins on this account:) to be honest, I'd carry a freaking slingshot if they'd let me...hahahahahahaha
  16. I use a shepherd on one M1A. Other is open.
  17. Well - it was a fun time at the range this past Sunday! Thoughts - - It felt good and solid - The weld of the face to the stock was higher than I liked, more of a chin weld - lower rings needed (more on that later) - SA mount held like a rock and no loosening of the mount was visible - the pre-shooting measurement of the mount position was the same after the range - The zero held across 60plus rounds - amazingly - why? When I got home I noticed that the cheap 30MM split rings I used - well one cracked Given that - I ordered new 30MM rings - an yes they were vortex - LOL - I guess I will never learn. I must say that the rifle in this configuration is fast, nimble and truly quick on target. This is going to have to be upgraded to an Aimpoint and proper steel mounts - maybe Christmas to me.... Anyone have any feeling about the Aimpoint ACO https://www.aimpoint.com/product/aimpoint-aco/ Also anyone have a good line on steel 30MM rings - or heavier duty aluminum that aren't made offshore?
  18. I thought I was the only SA/DA fan left in the world.... IMHO carrying a striker is almost like carrying a cocked SA without a safety.
  19. I first drilled with 1/16 drill bit. Then I threaded the hole with an M2 tap and then used an M2 3mm set screw with thread locker and also covered the hole. There is no way they are coming out even if I wanted to. I can weld the hole if I wanted. Pinning is probably the best method.
  20. Almost bought one of those from Harry's (which tells you how long ago it was) - but lost interest when the omniscient counter guy kept referring to it as a "Mannlicher". I do have the rifle version of your Musket (which is why I wanted the Musket too)... But my favorite lever guns are my two Model 71's. One is an original Deluxe model with a three-digit serial number (first full year of production - 1936) and the other is a Winchester / Browning / Miroku High Grade. Both, of course, in .348 Winchester. And you thought I only liked revolvers. Adios, Pizza Bob
  21. Yes, the ATF only provides guidance to how to get to 16+" permanently. NJ is a different ball of wax with barrel threads somehow being evil and deadly. Inspection of rifles is not likely, but even in a clearly justified self defense situation in the home: The police will arrest you. They will take all your guns away. They will inspect every weapon to add charges. As an other and more likely senario, a ERPO will also give them reason to inspect and charge.
  22. That is all irrelevant - it is not what is commonly done and with the proper breaker bar - I bet I could get it off easy peasy. I have seen work done this way and it is substandard. You need to drill a hole into the barrel threads to a suitable depth - the pin prepped (rounded) so it sits flush in the hole - then welded over. That way when and *if* someone ever took a long breaker bar - the pin, if spun with the muzzle device, would destroy the threads - thus rendering the barrel unable to accept another muzzle device. The most 'permanent' way would be to silver solder it on.... However, for our application here - the above method - simple pin/wled - would suffice - not torque and jb weld The application of JB Weld in any form or fashion to adhere a muzzle device, is "rube goldberg" stuff... HOW CAN I REMOVE J-B WELD AFTER IT IS FULLY CURED? When fully cured, J-B Weld can only be removed by grinding or filing it off, or by directly heating the product above the 600º maximum temperature threshold. All the info above is my *opinion* and like assholes, everyone has one - YMMV
  23. Hey there "Blue Star" - have seen your posts over on /r/njguns and been curious to meet and talk with you. I'm reserving the date, will RSVP over at your site and look forward to hanging next week.
  24. The muzzle device was screwed on with more torque than I could possibly do with my own hands to take it off. The pin was tapped in with a hammer which would go into the threads. JB weld was used to make sure you can not take the pin out. My comment about the threads "probably" being fine are an assumption. I have no idea, nor will I ever know because the muzzle device will never be taken off. I honestly don't know if it could be taken off without damaging the barrel.
  25. Trigger is probably easiest part of a lower build lol, enjoy brother!
  26. Lever guns are great! I have a Winchester in 30-30 and a Rossi in .357 Magnum! What's not to love?
  27. Had my share of stripping M16’s. Just never the trigger assembly. Will be fun.
  28. It is NEVER FUN when dentents and springs go flying everywhere! It is however, part of the learning experience that we all face!
  29. Thats a beauty.On my list to add to the collection.Good luck.
  30. 16" barrel so didn't drill down into it at all, he just tapped it in and JB welded it, it won't come off easily even if I wanted to try, but the threads would "probably" be fine? IDK, it would pass the sniff test regardless.
  31. Nice! How far into the threads of the barrel did you drill down to?
  32. JB Weld or even better, Quick Steel over the pin to keep it from loosening. But you still need a pin. I'm thinking drill bit end or steel punch?
  33. Nice work. What did you use as a pin?
  34. As Rutgers said, CTR is fine as long as you pin it. This applies to any collapsible stock. I went with the MOE fixed carbine stock for my build. It's great if you are building a carbine AR15, very solid, no movement at all when on the gun which helps with accuracy. It's also inexpensive. Here's a link. https://magpul.com/firearm-accessories/stocks/ar15-m4-m16-sr25-m110-ar10/moe-fixed-carbine-stock-mil-spec.html?mp_global_color=118 Once you have the stock figured out all you need a compliant upper and 10rd mag and you are set.
  35. It removes the valve. that's all there is to know.
  36. https://www.autozone.com/tire-repair-and-tire-wheel/tire-valve-stem/specialty-products-valve-stem-puller-tire/560285_0_0 https://www.autozone.com/tire-repair-and-tire-wheel/tire-valve-stem-core-remover-tool/slime-4-way-tire-valve-stem-core-remover-tool/487510_0?rrec=true
  37. I have a Hanks 21oz steel core belt as my everyday belt. Only had it a few months but seems very nice, and pretty sure it could last through their 100 year warranty. Made in US and has had zero problems carrying IWB/OWB plus spare mags and all the stuff (phone, leatherman wave, kimber pepperblaster) I always have on me with zero sag. Only complaint is, it is THICK. It is over 1/4" thick, so some cheap mag holders I've had don't fit on it. Stuff with better clips have not been an issue. Hanks has belts from $50-60 to a bit over $100 for carry, so i'd look there and see if thats what you are looking for. Prior to the Hanks I have now, I've used 5.11 belts with permastiff insert with good luck, typically getting 5-7+ years of daily use out of em before considering retiring em from everyday use.
  38. 1 point
    I just posted for the guys that don't load. And the guys that can't find 9MM. If natchez ever gets it in again, buy it!
  39. Five queries run at 4:25 PM today at TSUSA: Any 9mm, In stock only... "There were no products matching your query." Any 45 ACP, In stock only... "There were no products matching your query." Any 40 S&W, in stock only... "There were no products matching your query." Any 10mm, in stock only... "There were no products matching your query." Any 38 Special, in stock only... "There were no products matching your query." It's official! I have more in my basement stock than TSUSA.
  40. That's a big maybe....it s surplus military fiber stock...that is brownish already...i just might !
  41. Are you going to paint it?
  42. Makes me want to get my mat out and just screw with some steel at 100....it just fun twanging it.... What I DONT get...and why i move the bench... Is why if you cam move the bench, some don't? I mean your not going to have a bench in real life...shoot standing offhand...shoot kneeling sitting slinged up...shoot PRONE....off a backpack etc.... I see all these guys at the bench and i wonder how they would shoot without it...
  43. Thanks - hope it shoots - Bed the mount to the action and did the whole loctite gig - red right? LMAO Been a bit obsessed in reading about it - a great article I read was about - MPBR - Maximuum Point Blank Range with M80 7.62 Ball ammo - should be useable 0-275 yards - with a rise/drop of 1.5"/ 3" +/- before the 4MOA dot becomes a hinderance - some say minute of man with a 4MOA to 350yds etc. 1) I do not foresee a need to shoot with this rifle further than that - 2) The M1A/M14, if it does MOM for me, that is fine out to useable ranges, anything further you would be better served by a bolt gun IMO The idea a like is the quick application of target acquisition with a robust round. Also been obsessed with 9-Hole reviews....
  44. Ok, ok, had to take some over to the neighbor. I had a bit of a change in plans. The wife did not want me to make the entire packer, so I ended up cutting off the flat. Roughly 5 lbs trimmed. I trimmed it at 7pm. Rub is light layer of mustard as a binder. Maple BBQ rub and kosher salt with course ground black pepper Wrapped in saran wrap, went to bed later. Got up at 3:55, fired up the pellet smoker at 225, waited until the temp stabilized. Added my smoke tube. Using applewood pellets. Brisket went on at 4:15. I know others do it by feel, I'm not that confident, so I stuck my temp probe in. At 6:15 I spritzed with apple cider vinegar. At 8, I also spritzed. At 8:30 it hit 160. Wrapped in butcher paper. About 1pm it was still stalled at 171 so I turned up the temp to 250. At 1:20 PM, it was 178, now I'm worried. Lol. I turned it back down to 225. At 2:15, it came off hitting 203. I put into a cooler, still wrapped with temp probe still in for rest. At 4:30, it was at 160. I put in oven at 163 to hold temp until 6pm chow. At 6, I carved. Moist, tasty, juicy! Wonderful. Great bark, nice smoke ring. As good of a flat as one can expect!. The foil is simply because I had already put it away. Wife and I ate, I also gave the neighbors some too. I took back out of fridge for picture.
  45. Let me clear this up a tad. If it is a Barrel shorter than 16'' The muzzle devise MUST be welded as per federal law. Pinning it, and welding over the pin is acceptable. If it's a 16" barrel it must be pinned, but many FFL's Weld the pin so it doesn't fall out. Some dealers just press the pin in, some Pin and stake the pin and some pin & weld - all are acceptable but there have been a few examples of pressed pins working themselves out over time so we pin/weld. Some dealers may even tac weld the device on but that never really looks good (jmo) So it's just a matter of varying terminology as to Pin / Weld......... JT
  46. BTW. These are my 2 uppers with pinned muzzle brakes (16" 7.62 and 18" Wylde). I drilled a 1/16 hole all the way to the barrel, hammered in the pin and then put some silver and black thermal paste to cover the holes. That should be ok? Correct The paste can be removed easily but the pin might have to be drilled out.
  47. 16" barrel just pinned muzzle device 14.5" barrel pinned and welded muzzle device.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.