Leaderboard

Well, it's simmering. It's @Displaced Texan "Modified" chili recipe because I'm sure he is taking his spice list and ratio to the grave with him. Will post ingredients a little later. The ingredients. 2 pounds ground venison 2-3ish pound cubed up beef rib from the chain of a HUGE slab of ribs wife bought back during start of pandemic at Restaurant Depot. 3-4ish pound venison back strap 1 pound vension tenderloin 1 can Rotel Original (10 oz) 1 can Store brand Rotel (14.5 oz) 1 large red onion diced 2 medium whie onion diced 2 tablespoons diced garlic (from a store bought jar) 2 cups water 2 cups of wife's tomatoe sauce (she just made a lage pot the other day) 2 beef bullions cubes 1/2 cup maza flour (I used yellow) 1 bottle of Yuengling Hersey Porter The Chili Seasoning (I DOUBLED all the below as recipe said it was for 3 pounds meat in a beanless chili and I had easily doube that amount of meat) 3 tablespoons chili powder 1 tablespoon ground cumin 1 teaspon paprika 1 teaspon cocoa powder 1/2 teaspoon red pepper flakes 1/4 teaspoon cayenne pepper 1/4 teaspoon ground cinnamon I got the chili mix recipe from the interwebs from this web site: https://www.rachelcooks.com/2019/04/16/chili-seasoning-recipe/ I ommitted the garlic powder and onion powder becuase I used fresh onions and garlic already. Instructions: Brown all meats, cut the browned venison back strap & tenderloin into cubes and browned a little more. Sautee the onions & garlic with a generous amount of butter (3 tablespoonish) Add the water, the Rotel, tomatoe sauce and beef bullions to the meats Stir all together and place over low heat to simmer & stir occassionally. I simmered for a total of 3 hours. Around 2.5 hours I placed the 1/2 maza flour and full beer into a bown and mixed together. I added about a quarter of the maza flour / beer mix at a time to the Chili stiring each time. Simmer for another 30 minute or so.

Hopefully I've piqued your interest. Allow me to recommend S&W (used) models 14, 15 or 67 in .38 Spl or 19 and 66 in .357 Magnum. You'll find that you if you look the .38's are only $100 to $200 higher than your tactical tupperware. If you want to step up to the magnums you'll be adding $200 to $500 to the price of the .38's depending on the particular gun. For the price you'll pay for the magnums you could also consider the next frame size up and look at 586/686 models. Always glad to give advice - I love spending OPM. Adios, Pizza Bob Here's a Model 15 Here's a Model 19 Both of these are equipped with stocks that would add quite a bit more the prices I quoted in the above post.

Name's Jason and i'm in Monmouth County. Wife and I applied for our FA Cards/Handgun Permits back in June and finally got them at the end of September. We were looking to get a couple of 9mm handguns for home defense. We ended up picking up a Springfield XDE 4.5" for me and a Glock 19 Gen 3 for her. We've been to a couple of ranges so far and probably put about 400 rounds through each pistol. We're pretty much hooked at this point. I'm looking forward to spending time here and soaking up the collective knowledge of the members. Thanks in advance for reading!

Congrats

WTS: Marlin 1894 .44 Magnum/44 S&W Special Includes rifle, manual, original box and lock. Rifle is in excellent/like new condition. 10-shot tubular magazine Lever action; side ejection; hammer block safety American black walnut straight-grip stock; cut checkering; rubber rifle butt pad; swivel studs 20” barrel with deep-cut Ballard-type rifling (6 grooves) 1:38” twist rate Adjustable semi-buckhorn folding rear sight, ramp front sight with brass bead and Wide-Scan hood. Solid-top receiver tapped for scope mount. 38 1/2" long 13 3/8” length of pull 6 1/2 lbs. approximate weight Extremely low round count (22 rounds) Parachute cord wrapped lever $550.00 cash Transfer thru my local Morris County FFL. FID and matching DL required. Buyer responsible for transfer fees. The first to post “I’ll take it” wins the sale then followed by PM to confirm.

First ill take it gets it in the thread followed by a pm Nics and transfer in you at my local ffl..will gladly ship in state to another 01 ffl on your dime 490xxx winchester model 12...well used and sometime in its life someone gave it an 18" barrel...it was full. Barrel serials to the receiver. Rock solid lockup, slam fire (why people like that i dont know) - this is a great start to a trench clone Smoooooth as glass.... has that been there done that look....and no dents to the tube and it is bright and shiny Asking 450 OBO....

So, you're saying that Biden is lying about this on his web site, like everything else he's lied about? Or, does he just not remember what's on his site? Here's just one, there's a whole lot more at the link. ...."End the online sale of firearms and ammunitions. Biden will enact legislation to prohibit all online sales of firearms, ammunition, kits, and gun parts." https://joebiden.com/gunsafety/

we are going to look in charleston area. just getting started so to speak

polls are wrong Trump has more support than last time

So, what is the point of polls? Does it sway one's potential vote in either direction? I would think that the outcome would stimulate the losing party to campaign more?

You can send Walther CS an email. I had contacted them when my PPQ trigger return spring failed and they sent me a replacement with a spare (occurred at 12k rounds for those curious). Taking the PPQ apart is no more difficult than a Glock or any other striker fired gun. You should be able to do it with help from YouTube and a few punches as Stu already said.

phew.... good thing it wasn't squirrel...

This one should be here tomorrow. https://www.midwayusa.com/product/1016958652?pid=271904

OK, after my last post, I'll give you just one sample (of many) showing the (in)accuracy of the polls. First, flash back to October 2016, here's the WSJ/NBC poll on Hillary versus Trump: ...."Hillary Clinton has opened up a 14-percentage-point lead against Donald Trump nationally, according to an NBC News/Wall Street Journal poll released Monday." https://www.cbsnews.com/news/poll-hillary-clinton-leads-donald-trump-by-14-points-nationally/ Now, fast forward to the beginning of this October 2020, and here is the same WSJ/NBC poll: ...."Joe Biden leads Donald Trump by 14 percentage points nationally with about a month to go until Election Day, the new NBC News/Wall Street Journal poll found." https://www.cnbc.com/2020/10/04/2020-election-news-biden-leads-trump-in-nbc-wsj-poll.html What happened on Nov. 8th, 2016???? Still think the polls are accurate?

3 like new cases. taking up room! 20 each or all 3 for 50.00 P/U in waretown https://imgur.com/a/en0x9Gl The first to post "I'll take it" wins the sale

SPF @loonhead

PM incoming - I am going to make a recommendation that was made to me.

Hope is not a strategy.

same here

Actually, it included your choice of a die set when sold new; other tahn that, it is a totally universal press using standard modern dies. Heres a little advertising price sheet i found on line that garners some insight and info..

Don't forget, DST ends Nov 1 at 0200.

The numbers were just not there for us so why take up a case that can further damage our 2A rights? With ACB, I am sure they will take the cases and most likely rule in our favor going forward!

It was 5 libs to 4 conservatives. Now it's 5 conservatives to 4 libs. Yes, Roberts is a lib (or compromised).

Nice write up, Glen. I enjoy doing the ‘how to’ cooking threads. In the near future, I’m gonna show you guys how to make home made sausage.....

I'm not concerned with the polls, I'm concerned with the guaranteed fraudulent mail in ballots. But to answer the question, I don't see prices coming down any time soon no matter who wins. Or at least until the used gun market is flooded once the panic has passed, unless you live in Portland.

Hard to say who will win, honestly see it 50/50. But I do know this, I am voting for Trump and down the ticket to see the price of ammo and guns stabilize and go down and to prevent Biden/Harris from messing with our 2A! But to be honest, I don't see it going down even after a Trump reelection.

I have this one! I love it! I do dry tumble though. https://www.amazon.com/Lyman-Products-Turbo-Media-Separator/dp/B00URUDWEE/ref=sr_1_7?crid=1RDKAAWI6AFX8&dchild=1&keywords=media+separator+for+reloading&qid=1603674402&sprefix=media+sep%2Caps%2C157&sr=8-7

Yes, recipe please, since the other guy is taking his to the grave, or at least back to Texas.

I have the Frankford media separator and its a beast. I just whip the handle like there is no tomorrow and it gets every pin out. Out of 1000 223 rounds I prepped, I didn't find a single pin stuck or floating around in a case. It gets most the water off them too. Can also be used with dry media.

It thickened up nicely. I think it taste pretty darn good! I used the yellow. I'll use the white next time.

Personally i love my 2 czs. Maybe ill make a Smith my next one. Maybe an m and p next?

When you see a poll posted, you need to search for the Methodology of the poll. Sometimes they put the link right below the poll. Other times, it's a major search to find it. Once you locate it, it will show the questions that were asked, and if you pay attention, you'll see how they "lead" the person being polled. Then, somewhere in that methodology, they'll list the demographics on who they polled. In almost every case, they poll MORE Dems than Repubs, even though it's almost even in the real world.

There will be unprecedented voter fraud this election. A possible scenario is that Trump wins, the Senate holds and the Dems steal both. An illegitimate government will likely spell the end of the Republic.

.....so...i was in Charleston this week finding a place to live....success.... will be back in March...to start to finalize. We drive down 81 to 77 to 26 then 526.. I would be surprised if WV and VA went any other way but Trump...if....placards are any indicator...even NC....it was more of a mix though SC, again i think will go trump....BUT Charleston county...specifically Mt Pleasant had a lot of Biden crap...sullivans isle...isle of plams..etc. west ashely not so much....down 17 to HHI..Beaufort..Trump... Graham was getting pounded in ads by the dems...if he makes it back...i would be surprised...BUT that is onlymobservations from a car window and walking around. Overheard a convo though of two old guys at the Blind Tiger Pub..Friday lunchtime...bemoaning Bidens tax plans... we will know soon enough..

i have said this for years about polls. you and me, and any other member could all go to the same mall, ask the exact same questions in the exact same way "randomly" and come up with wildly different results. also....where can we find the data to look into the polling? you know where about i live i think......i see tons of hiden signs in my home town, cherry hill, haddonfield, lawnside, stratford.......every dam where i drive. i figure i at least know who the commies are....

sadly, i personally think that there is a chance of this, whether through crook or hook........ exactly

Amazon delivered some citric acid powder today, setting me up for round two. Once again a two hour tumble in hot water with a splash of Dawn; this time with the pins & citric acid powder also. I'm now satisfied with the results. Primer pockets are nice and clean. While I accept that it may not matter, in my mind a clean pocket reduces the chance of a primer not seating properly. To me that makes it worth the extra investment in time and product. Those pins though, man are they annoying! I'm glad I ordered the fancy media separator, that should be here tomorrow. Meanwhile, I test fired another 10 rounds yesterday, making me confident to go into mass production with that load. I have two other projectiles and some different powder to create test loads for as well.

Thanks for the add, Brand new to Firearms. 56 now. Fired a few in the 80s but now that I moved on from last hobby(drag racing) very interested in starting a new hobby. At the stage of just received FID and awaiting Purchase permit. FID only took 30 days. Applied for PP after October 1st and if I read correctly it will be electronic form. Decided my first purchase will be a P226 Legion or possibly MK25. So far struggling to find one. Sill have time until permit comes in. I'm hopeful. Well hope the group don't mind questions, I'm a heavy researcher prior to big decisions. Thanks for reading

Stop watching CNN. I don't take anything for granted, look at 2016 Only thing guaranteed in life is death.

It wasn't a Glock, it was a 1911. There was no thread because Howard (no longer on this forum - moved to a free state) signed a non-disclosure agreement.

You can zero at 10 or 25 yards easily. I do a 50/200 Zero on my ARs. https://jerkingthetrigger.com/2015/02/13/zeroing-target-50200-yard-zero-at-10-yards/

I spoke with FIU, the permits are issued for 90 days and will automatically extend for another 90. The only way it will not is if the chief goes into each permit and manually stops the extension. Also, there is a lot of information about the epermits on https://njsp.org/firearms/forms.shtml

No wonder Biden's been hidin' they're looking for nuts!

New guy! Just found out today about the forum from Scott Rivera of SWAT Firearms in Hammonton. I’m a new gun owner, but not entirely new to shooting. Looking forward to connecting with other NJ shooters. Thanks!