raz-0

That looks like it's pushing the primer back as well on some. I'm saying either hot ammo or a tight chamber bumping up pressure.

Why own guns? It's legal, but why go through the hassle. That's a poor reason to do anything.

You should really check you are right before calling out people for being wrong. Yup.

SInce she's still holding him while he is bleeding out and Rick turns away before shooting, it's Peter.

There's been a number of evaluations of the 10,000 hours theory. The conclusion is, as a number, it's a load of crap. Different skills require differing amounts of effort, and different people have a harder/easier time with any given skill.

Well there's the outside chance the en banc process is started as a delaying tactic. It is a possibility, although I agree that in most likelihood, they intend to reverse it.

No, because apply to be denied is going after the states defense of "but of course we approve tons of these. 97% of applicants get theirs". This is just looking for people who have been denied already looking for potentially aggrieved parties. The legal reasoning other than "shall not be infringed!!!!" really isn't stated. That's a legal non starter. So is going the privileges and immunities route as SCOTUS said as much in heller and a number of other cases that wanted to revisit that bit of the bill of rights. There's a difference between lunatic raving about 2A issues, wishful thinking that is slightly informed, and a legal strategy that has some sound legal thinking and wicked legal strategy behind it. For example the calguns foundation and SAF have some sound legal strategies going. They don't give it all away though, but they do tell you enough to know it isn't lunatic ravings or wishful thinking. They also don't ever make the statement like: " 5. Every effort so far, for the past 40 years here in NJ has failed. Will our's work? If it gets to the final stage, the answer is yes." Your final stage can be SCOTUS, it could be constitutional convention, it could be bloody revolution, it could be intervention by the lizard people. There are NO guarantees of victory, ever. Statements like this tend to make me thing that this falls into either the wishful thinking category or the lunatic category, in order of likelihood. There may be a sound plan, but the come on does not make it sound worthy of my time or money. Short of either altering the come on, or getting enough people I know have sound judgment to vouch, it jsut isn't going to get much of my time.

Primary arms is pretty affordable and pretty good. If that's still out of your range, I'd wait for a clearance sale on bushnell or Simmons. That can get you down to about $60-70.

I used to use precision delta FMJ, but have gone to no exposed lead. I have used precision bullets coated lead, berrys plated, rainier palted, the bulletworks.net plated, and xtreme plated. I've also used montana gold CMJ. All things considered I uses thebulletworks.net's plated or extrme plated. I'd used the berry's double struck plated too, but have no reasonably priced source for such. The coated IMO, jsut aren't worth it. I dunno how much ibejiheads discounts for not shipping, but freight included for them is $105 per k. FOr BBI coated it is 90 per k shipped. PRecision seems ot be offline, but they were around those prices. The bulletworks.net is $100 shipped for nice plated stuff. xtreme if you wait a week or so for their rotating 5% discount to be the caliber you want is about $104. I'll pay the $10-15 per K to avoid the TLC coated needs.

http://lapakdonatello.blogspot.com/ Well there's another picture of it tagged "King Cobra (Lokal)" Except for the sheath it looks VERY much like a POS combat knife that used to be sold by smokey mountain knife works back when. That came with a nylon sheath and black handle. You will note the dudes page has it in the company of some of the finest gil hibbard knives knock offs (I mean a numebr of them aren't even real gil hibbard knives, which isn't exactly aiming high). You will note none of the blade markings appear the same, but it still says "hand made". I will also note it ships with a POS stamped steel knife strapped to the knife which is ALWAYS a mark of quality. http://76.my/UserImages/Items/1005/06/abenini%401.jpg the same thing in black. Note the awesome spare knife with your knife. and another http://76.my/UserImages/Items/1005/06/[email protected] the web cache that remains of the page thsoe were linked form says "This is a serious looking survival knife that can be used for cutting .." Well of course it can. As for this: https://www.bukalapak.com/p/hobi/koleksi/benda-tajam/52zap-jual-pisau-king-cobra-pisau-lempar It translates to US dollars for me. It says $9.49. Which seems like a fair price since it looks like junk. So.... why do you want this knife?

Because there is no information about the actual plan. Having read their info, there seems to be absolutely nothing indicating that it shares much DNA with the apply to be denied plan.

Hmm. I can't find a pic of their bolt, but they sell the spares. It looks like the LMT enahcned bolt with two extractor springs. In which case, I've run into a couple people with failures of such a system when researching my last build. Failure mode was the same for both. Single spring failed creating a binding situation that lead to FTE/FTF issues. Both were high volume competitive shooters. Those were both LMT purchased directly form LMT though. Are there any other changed on the KAC one? (okay, found pics and description) AS for the rounded lugs. I have a bolt that implements that. It needs a barrel specifically head spaced to it regardless of the manufacturers claims otherwise. It dealt witht he cam pin area by making it as thick as the raised ring on a normal mil-spec bolt rather than altering the cam pin dimensions. given that they specified the carbine length operating system, I doubt there will be much tuning of anything. To me it sounds like they want a bag of armorer installable parts without inventory hassles. That may mean spares interchangeability, which would mean no fancy bolt or special gas system. just rail, gas blocks, and sights in one bag, trigger group in another bag form someone else.

Just finished reading them, and I am 100% with you on this. The contents put forth seem to largely be the equivalent of an NRA questionnaire or similar and ammount to a meandering screed going on about liberal or conservative and the second amendment followed up by getting someone to say "with us" or against us on the subject. The only bits that might rise above that are that it gets into the issues of oaths to hold office, and perhaps traps them into picking a side on the issue of burdening the law abiding. In a utopia of legal logic, you might be able to go down the road of a RICO lawsuit for conspiracy. That'd be kind of rough. You also, in an ideal world, would be able to go back to the NJ constitution, the oath to hold office, and the guarantee in the constitution to defense of oneself. ("All persons are by nature free and independent, and have certain natural and unalienable rights, among which are those of enjoying and defending life and liberty, of acquiring, possessing, and protecting property, and of pursuing and obtaining safety and happiness. ") A premeditated effort to deny that should be enough to kick someone out, but this i NJ, and it won't be. More realistically, it sounds like a fishing expedition for a privileges and immunities case. Which SCOTUS has pretty much stated that although they think the current legal status of that clause is BS, they weren't about to touch it as it would leave courts everywhere with a century of cases to retry, so suck it up and never speak of such things again. (I'm paraphrasing here)

That's my bet.

Do NOT get ICE glasses for significant prescriptions. They say they will handle a heavily - diopter, but only in the plastic inserts. Which have to bend in the middle to mount. Whihc makes the grind o the lenses wrong. They are a giant POS in that regard. If you have a significant prescription and are looking at rudy project, CALL THEM. Calling them will get you an accurate answer. Looking stuff up on the web will not. I know form experience. They were a lot less hassle than their web site too.

the cheap online glasses places are great fro spare pairs in case of shtf, or of 3 year olds. The kid has me down to my last pair, need ot get more.

Perhaps they are Ms, but the person makign them is the guy who chose the font for apple's keyboards

So like eating a meal with gay people means you are gay? I think people may be reading into it a bit too much and mistaking tyring to get some plot points in before the finale as something else.

I think you missed the point of the book. THe plot is there as candy coating for the history lessons and such. The plot is the filler for the most part.

I'm going to refrain from particular recommendations other than to say I am less than pleased with most of the off the shelf setups for desktops these days. They are focused more on corporate deployment, and tend to be built with power savings in mind and this is mostly done by having very slim margins on the PSU vs peak component draw. Couple that with pretty cheap PSU builds, and you have the reason for most of the refurbs available ont he market. I will however say that for complex use and a variety of uses, a 256GB SSD is NOT the way to go. I've got one at work and I'm being constrained by it just with installing VMs and some development software. I've run into other issues with smaller boot drives at home with software that does stuff on/in default user directories without asking you your preference nor offering the option to change it. SSDs are nice, but my opinion at the moment is that if it isn't for a specific purpose where a small boot drive is a good fit (like and HTPC setup for example), if you can't afford a 500 GB drive or bigger, you can't afford SSD right now.

The big scammy pitfall for loan consolidation is when the "service" consolidates you into a loan with terms that benefit them and have done so while pushing you into chapter 11 bankruptcy for restructuring your debt. They will use that approach to negotiate terms with your debt holders, then pass little to none of that benefit on to you. Worst case you wind up with all your debt wrapped up in a loan with higher interest than you need, have the chapter 11 get most if not all of your accounts closed, and no way out of that loan for the next 7 years because of the bankruptcy. It can wind up really bad if done unwisely.

Yes that would be the agency bit of "to agencies". IIRC they can also sell it to you directly if you have the right paperwork on department letterhead. No idea how you go about handling the disposition of firearms personally purchased for work that are non-compliant once you ceases working for said agency though.

That was my reasoning.

open tip match.

Thompson center contender G2 will shoot it jsut fine.