Everything posted by lunker
- "Wild west" rifles
-
Whats next..inspection? Insurance??
Those fukkers. When does it end? We are already a laughingstock because of our retarded laws. I hope Christie has the guts to veto the bill if it ever lands on his desk.
-
The High Road Forums Merged?
I had a membership in both, but I received no information e-mail or anything when the HighRoad.US sight became GunRightsMedia.com. I would've never known, especially since the .US site now redirects to the .ORG site.
-
Extended Mag tubes on Rem 870
Frank. Head over to your reloading bench and pick up the calipers. I always knew those tabs on mine for measuring internal diameters would be useful for something some day.
-
Extended Mag tubes on Rem 870
Well, you can always use one more socket. The hard part is going to the hardware store with a shotgun to check the fit.
-
"Wild west" rifles
Marlin 1894 and 1895 are great guns. I like that they are fed on the receiver and have side eject (in case you want a scope). The Henry looks nice and is US Made, but is chock full of MIM parts. Some folks are OK with that though.
-
Extended Mag tubes on Rem 870
Frank, no need If you have a deep socket set. You just use a little oil and keep turning the socket until the dimples smooth themselves out. Works like a charm. No drilling, and you could punch the dimples back in if you ever feel compelled to. Unfortunately I don't remember the socket size. I believe it is US (i.e. not metric) and fairly common size. Some people use the smaller socket first to get it started, then move to the larger socket once the small one can turn freely.
-
2 Ladies, 2 Birthdays!
Did you at least take the day off? That is a rule for me.
-
2 Ladies, 2 Birthdays!
Happy Birthday.
-
Howard Leight Electronic EarMuffs $50@ Midway
These are nice because they are flat enough to be able to shoot rifles. http://www.midwayusa.com/viewProduct/?productNumber=671923&cm_cat=Shooting_2&cm_ite=Product1_Image&cm_lm=sp:[email protected]&cm_ven=Spop-Email&cm_pla=Shooting_11020112_1&CustNum=101282957
-
US 'cannot accept' China military power
+100 There is no reason for an American Empire in the 21st Century. Now if only our country would focus on energy self sufficiency. I would love to have us develop the technology, spread it around the world, get rich off of it, and watch the autocratic oil driven regimes in the middle east implode.
-
Romantic Spark
I always cry during sex. But then the mace wears off.
-
shooting both .357 and .38 special in range session
I have read that the soot ring exerts pressure on the brass where the bullet is seated, effectively making a much tighter crimp on the bullet and allowing pressure to build higher. I can't speak from experience though. I have never had any kabooms, but I have had tough extractions from shooting 38 special in a 357..
-
How do you get started with reloading?
By the way, if you are going to start reloading and have to make a choice as to which caliber, I have a suggestion. 45ACP -The savings over store bought ammo will be substantial. This is a low pressure round, so your margin for error is greater which is good when you are first starting out. 45ACP brass can be used over and over again. Because of the low pressure, and because the ejectors on 1911 are not harsh on brass, I have yet to wear out a piece of 45ACP brass (i.e. make it too brittle or hairline cracks, swelled base, etc). It can be picked up off any range floor or brass bin, assuming the range doesn't care. The other consideration would be powder. Although something like Bullseye is a good powder and is very cost effective because you use so little of it, I would start out with something less dense. It is very easy to double or triple charge a 45ACP load with Bullseye. You don't want to run a round like that through your gun. Buy some Trail Boss powder. You will practically fill the case with powder, so there is no risk of overcharging.
-
Reloading services
Last time I spoke with Frank (two year ago during the great Obama primer shortage), he told me he hadn't reloaded ammo in a while. I believe he would do it, but you would need to provide him with the components (i.e. brass, primers, powder, bullet heads).
-
BA 1/11/11
You're shooting an old Nagant revolver? Cool.
-
Reloading services
Maks, That Ronnie round you showed me looked like it might be a little unpleasant to shoot, especially in a revolver. Nothing like a face full of primer ignition.
-
How do you get started with reloading?
Everybody says that. Except me. I like to knock out 100 pistol rounds and head to the range. The idea of spending two hours reloading does nothing for me. I need to find some inner zen or something.
-
How do you get started with reloading?
These two books are a must: ABC's of Reloading - This one explains the basics very well. http://www.amazon.com/ABCs-Reloading-Definitive-Novice-Expert/dp/0896896099/ref=sr_1_2?ie=UTF8&qid=1294334471&sr=8-2 Lyman reloading manual - This also explains the basics very well. It lists all different types of bullets (jacketed, cast) by different makers and all different powders. Most books stick with their own bullets (i.e. speer, etc). http://www.amazon.com/Lyman-Reloading-Handbook-49th-Edition/dp/B001FBFW6U/ref=sr_1_1?ie=UTF8&qid=1294334471&sr=8-1
-
shooting both .357 and .38 special in range session
I don't need yet another type of brass to collect, and to have to adjust my dies back and forth between the two. Besides, I like shooting hot 357 better anyhow,.
-
shooting both .357 and .38 special in range session
I don't get it. Lead 38 specials then jacketed 357s to wash the lead out?
-
USPSA Introduction Class at Shongum
Sign me up!
-
shooting both .357 and .38 special in range session
I never run 38special through my guns. If I want target ammo, I just load 357 very light. A fast powder like Bullseye does the trick well.
-
Bullet Hole vs Bayonne Pistol Range
I'll bet Stephanie is game.
-
Bullet Hole vs Bayonne Pistol Range
I would be happy to be on the Shore Shot shooters team (assuming I am good enough).