Everything posted by lunker
-
shooting both .357 and .38 special in range session
You can shoot both, but should shoot 357mag first if you plan on doing both in the same session. Unburnt powder forms a soot ring in the cylinder right at the edge of the case mouth. This acts to constrict the cylinder a little bit. If you shoot 357 first, then 38 special, there is no issue. If you shoot 38 special first, the soot ring builds up in the area where the longer 357 brass will be sitting. This will cause higher pressures. 357mag is already a high pressure round. My biggest gripe is that the soot ring makes ejecting 357 brass much harder. The easiest thing to do is quickly run a wire bore brush through the cylinder holes after shooting either caliber..
-
Second Amendment Message from Michael Patrick Carroll
You don't win anything in National Republican politics if you're not pro second amendment. Look at the chilly reception Giuliani got (of course his liberal social views assisted in that).
-
Second Amendment Message from Michael Patrick Carroll
Bravo to Mr Carroll. A well thought out and well written, respectful letter. The only part I don't get is the reference to Maryland, considering California and New York City still have us beat for asanine gun laws.
-
Any Opinions on Fusion Firearms
I only found this out after many searches. I was ready to plunk down some $$$ for a Fusion 1911 in 10mm. I have spoken with the owner and found him to be pleasant. Sometimes things change once a business already has your money though. There are lots of good stories and reviews about Fusion on the 1911 Forum and in the 10mm club on Glock Talk. But this is just enough smoke here to make me think there might be a fire. That's a real consideration on a nearly 2k pistol.
-
Great Deal on Used CZ75s
$349 shipped [/url] http://www.wideners....21&dir=700|1012
-
The High Road Forums Merged?
Has anyone else noticed that the competing High Road forums (highroad.org and highroad.us) have been merged? Did Oleg Volk win his fight against the person that took over his website? Do I have my facts straight?
-
Any Opinions on Fusion Firearms
Here is a really long but informative read on Fusion firearms. While I think the OP is a squeaky wheel, he certainly should've been treated better. There is one 1911 Forum where Fusion is a sponsor. Any mentions of problems with the gunsor customer service are promptly deleted. This thread is from Glock Talk, where the rules are a bit looser than the uptight freaks at the other sight. Ask Tony357 about them. http://glocktalk.com...d.php?t=1240356
-
powder valley
I don't think so. To me it feels like a lighter version of the NY1 trigger now. It definitely makes a nicer indent in primers though. I have been bringing my disassembly tool and a few springs and connectors with me to Shore Shot to test various configurations in the same outing, for a good apples-to-apples comparison. So far this heavy striker spring, heavy trigger reset spring, light plunger safety spring is my favorite. I haven't decided whether I like the 3.5 or 5lb connector better though. I am still running a stock safety plunger and striker. One of these days I'd like to try the mechanism with the trigger stop screw.
-
What could it be???
I would've bought the cheaper mags, but it was a package deal for the M1A Scout, cleaning kit, and four mags for my P7M8.
-
What could it be???
I thought I had it bad. My M1A mags are $50 a pop.
-
powder valley
Frank, The Tula primers work fine in my G34. I have the 3.5 connector with the extra power striker spring @6lb (stock is 5.5lb, and the reduced is 4lb).
-
What could it be???
Meaning you can pull the trigger again on a round without racking the slide (i.e. in case of a light strike, debris in the gun, etc). Glocks are not double strike capable.
-
44 mag what do you think
That's a mighty heavy round (I used to load 240grain). I bet it's pretty long. Will the OAL be OK in your Ruger? The recoil should be stout, to say the least.
-
What could it be???
Reintroduce the PC-9 and PC-40, but accept Glock magazines. Nah, that wouldn't sell like hotcakes.
-
15 round AK-type magazines
Thanks Pete. Great find.
-
IDPA Classifier Match - 1/16/11
Count me in as a maybe. I am looking to clear the date with the little lady.
-
357 sig vs 40 s&w
40 is everywhere. During the Obama shortages, it was the ONLY pistol caliber to be found anywhere, 9mm, 357mag and 45ACP were nowhere to be found.
-
357 sig vs 40 s&w
Jermz. had a Glock in 357Sig. I have fired it a number of times. The recoil and report are stout, comparable to 10mm in a Glock 20. I imagine the recoil would be less in an all steel Sig.
-
357 sig vs 40 s&w
I wouldn't worry too much about the sight difference if one of the barrels would be just for range fun. The difference in point of impact will be negligible at self defense ranges ( 10 yards and less). It would be different if you were a bullseye competition shooter.
-
357 sig vs 40 s&w
The best man-stopping round ever created is the 125 grain 357magnum. This has been documented from years of police records of shootings. The 357 Sig was created to mimic the ballistics of this round, and does so very well. It can't compete with the 357mag at higher bullet weights, but at this light one it does the job. The stopping power of a 357 magnum combined with the capacity of an autoloader. What isn't there to like? (Besides the flash and recoil )
-
FN FiveseveN
+1 on plasticky feel. And I am a Glock guy.
-
FN FiveseveN
They are fun to shoot, and very accurate. I have shot Tony's from TJ Sporting Arms. He brings it to Brick Armory sometimes.
-
HAPPY NEW YEAR!!!
HAPPY NEW YEARS EVERYONE. Can't wait to break my first resolution.
-
Small light reliable inexpensive pistol chambered in 40
Hell, that looks like it could be a 7" Longslide. Crazy!
-
Show Us Your Bolt Action ,308's
I predict a precision Mosin Nagant will be residing in that stock soon!