Everything posted by lunker
-
Went to Fort Dix Today (Oct 13th) and have a Heads Up
Jimmy, I am still looking to take you up on that offer. Maybe in a few weekends? This weekend and the next are booked for me, and the following one is the Ft Dix get-together.
-
Went to Fort Dix Today (Oct 13th) and have a Heads Up
I want to shoot at steel plates. I can live with not blowing up fruit, but i want to be able to hit steel at 200-300 yards. Is that allowed at CJRPC? Does it need to be 6 feet in the air?
-
Strobe features on tac lights...
Send him into an epileptic seizure, like those Japanese cartoons did to people.
-
New Member from Monmouth Co.
I guess I will have to have a reloading class some time soon. There are a bunch of folks on the board who have asked about that. I'm on the fence though because it means I would actually have to clean up my basement first for guests.
-
New Member from Monmouth Co.
Chirp... Chirp.. Those were crickets. Actually there are a few women here, but except for Anastasia and you, I don't think anyone else made it obvious in their screen name.
-
Went to Fort Dix Today (Oct 13th) and have a Heads Up
I may be wrong, but I thought Central Jersey was more restrictive than Fort Dix when it comes to targets. I don't know if you can even shoot at steel targets at 200-300 yards, or they need to be 6 feet in the air. As for fruit, I don't know. Maybe a member can chime in here and let us know.
-
Tuesday (10/12) at Shore Shot/BA?
Sure. Just remind me as it gets closer.
-
North meets Central meets South!
Now that is upsetting. No more blowing up overripe tomatoes with the 204 Ruger.
-
Tuesday (10/12) at Shore Shot/BA?
That's the one. Nice folks and good ammo.
-
Tuesday (10/12) at Shore Shot/BA?
You should start checking into reloading. 10mm ammo will put you in the poor house. I would go to www.georgiaarms.com to get some good cheap 10mm ammo (they have other calibers cheap too). The wait can be a few weeks, but the pricing is awesome.
-
New Member from Monmouth Co.
+1. In trap your vertical lead is pretty much the same for each shot because they all follow nearly the same vertical trajectory. The only thing that changes is the horizontal direction. Skeet requires constantly changing your horizontal lead depending on where you're standing.
-
my 3 PP & FID are in!
If you make it to Shore Shot on a Tuesday night, I can bring: Glock 34 (9mm) Beretta Steel I (9mm) S&W Model 28 (357mag) Dan Wesson CBOB (10mm) Ruger Blackhawk (10mm) If you plan to make it, let me know and I'll bring the one you want to shoot.
-
USPSA Match Tenafly NJ (Indoors) 10/17/10
Ron, I am surprised that the town has not found a way to shut the range dow. That town is none too gun friendly. I am glad it is undergoing a revival and you're part of it. We all know how hard towns make it for new shooting ranges to open. The old ones need to be kept going.
-
Tuesday (10/12) at Shore Shot/BA?
I'm bringing my Dan Wesson 10mm next week to show Yankees. This could start to get expensive.
-
USPSA Match Tenafly NJ (Indoors) 10/17/10
I grew up in Tenafly (after living in JC and Union City when I was little). You would have to try really hard to find a bigger collection of rich liberal assholes than you would in that town. If my parents didn't still live there, I would never set foot in it again.
-
uspsa @old bridge 10/24 registration open
I've probably met him, but nobody comes to mind right now. Cracking a Brigadier slide should be pretty tough. The best thing to do to avoid this situation is to check your locking block often and see how it looks. That is the part that is supposed to take the brunt of the slide movement and be changed out after several thousand rounds. I don't think the slide would crack unless the locking block was worn beyond the point of being able to do its job. I am not a gunsmith so please take my advice with a healthy dose of skepticism.
-
uspsa @old bridge 10/24 registration open
Stephanie, There are models that will withstand the abuse better. Any of the models with the heavier Brigadier slide (Brigadier, Combat, Elite, Billenium, Steel) would do. Also, the models with the Brigadier slides AND steel frames (Billenium and Steel I) would withstand the abuse of 40S&W. I own the Steel I and love it. It is built like a brick shithouse.
-
my 3 PP & FID are in!
Toughen up Maks.
-
uspsa @old bridge 10/24 registration open
Krdshrk managed to post while I was researching. Oh well, that's a bummer. Looks like it will be the Glock 34 if i want to shoot Production.
-
uspsa @old bridge 10/24 registration open
OK. It was offered from the factory this way. I have not modified it in any way. Below are the rules I grabbed from the website. I would think it meets the criteria, but I don't know about #3 through 5. 1. 2000 manufactured and available to the general public . 2. No magwell attachments or external flaring of the magwell, the lateral internal width of the well may not be more than 1/4" wider than the lateral width of the magazine. The lateral width of the well to mean the narrow width where the mainspring housing is inserted, the lateral width of the magazine to mean the narrow side that faces the mainspring housing when inserted into the handgun. 3. Must meet the criteria listed in the appendix of the current rule book as well as that listed above. 4. The gun must be viewed by NROI prior to its acceptance. 5. A production gun approval form filled out and signed and returned to NROI.
-
uspsa @old bridge 10/24 registration open
That sounds like a real disadvantage. Thankfully my Beretta is Single Action Only. It has a frame mounted thumb safety like a 1911.
-
uspsa @old bridge 10/24 registration open
I just meant to say that the added weight and single action trigger on the Beretta make followup shots easier. I agree with you. Sights are the first thing that gets swapped out on any Glock I buy.
-
uspsa @old bridge 10/24 registration open
Does that mean the mags need to only have a ten round capacity, or that they can only be loaded with ten rounds. I would rather avoid buying Beretta 92FS 10 round mags if I can.
-
uspsa @old bridge 10/24 registration open
Thanks Ron.
-
uspsa @old bridge 10/24 registration open
I am not sure about that either. I know that in order to not get stuck in the more difficult class (Open?) at Glock Matches, I would need to have only stock parts (i.e. I would have to remove Wolff springs and Ghost connector). The Beretta is a better gun for shooting tons of rounds anyway because it is all steel. And that one is all factory parts.