Everything posted by lunker
-
Do you shoot with your non-dominant eye closed?
Pistol and rifle, only the dominant eye is open. Shotgun, both are open.
-
Monster Mosin.....Almost done. Updated 6-15-10
Is Tony from TJ Sporting Arms all out? I bought mine from him a few months back.
-
What would you say is the best 9mm that is most easily
And some would say JMB improved his designs one step further with the gun he created after the 1911, the Browning Hi-Power, on which the CZ 75 was based (and IMO, improved on). http://www.hipowersandhandguns.com/Brow ... d%20CZ.htm
-
B.A. 6/15
There was a while where I liked the fancy microbrews, but I have come back home to shitty macrobrews. My favorites, in order: 1) Miller High Life and High Life Light (not Genuine Draft, a sweet beer for women) 2) Schaeffer - The one beer to have when you're having more than one 3) Schlitz - nuff said 4) Pabst Blue Ribbon (used to be #1, but dropped a few because all the urban hipster douchebags drinking it these days) If I am to be forced to drink good beer, I can live with a Harpoon.
-
What would you say is the best 9mm that is most easily
+1
-
Special on 45ACP ammo
Modern service pistols can take +P ammo. 45ACP is a low pressure round to begin with, so the +P ammo is not that abusive. Continuous use will accelerate the wear of the gun. Occasional use won't be a problem.
-
Special on 45ACP ammo
Ooops. :oops: I told you Cheaper Than Dirt Sucks.
-
Special on 45ACP ammo
I don't like Cheaper Than Dirt. I think they were one of the worst gougers during the Obama shortages, but they have a good deal on 45ACP (+P) ammo. $16 http://www.cheaperthandirt.com/AMM527-1 ... 26FreeGift
-
200Gr SWC what a pain!
Shane, I used to have occasional feeding difficulties with Hornady 200 grain lead SWC out my Colt Gold Cup. They fired and ejected OK, but would occasionally hang on the feed ramp. I preferred 230 grain ball so I never tinkered around with their OAL, which I suspect was the problem.
-
Happy Belated birthday Matt6666669
Happy Birthday!
-
Officially a Kool-Aid Drinker
A few months back I had been thinking of getting rid of my Glock 34 to finance yet another rifle purchase. I wanted to keep my CZ 75B Compact because it was a nicer, blued all-steel gun. The problem was that the Glock is just the easiest gun in the world to shoot well. I would have to say that it would be my handgun of choice for Ray's Zombie Apocalypse scenario. I never worry that it won't work. It is is made up of only 33 parts. Excluding the barrel, frame and slide, the most expensive replacement part on the darn thing is $20. Most are under $10. The aftermarket for Glocks is enormous. The Glock is overbuilt to withstand severe treatment. If you are a recoil junkie (like me), the G20 is the one gun that was designed to shoot the original 10mm Norma loads (180grain @1200fps) and has been able to withstand the abuse. The Colt Delta Elite and the EAA Witness both have a history of cracked frames. Even the stout S&W 1006 has been know to have a few hiccups with heavy loads.
-
92fs vs 90 two
I'll take the M9 over the 92FS, if only because it doesn't have the retarded lawyer warning on it (although I like the rear sights on the 92FS better). Below is courtesy of the FAQ on the Beretta Forum. The differences between the M9 and 92FS: The M9 usually has a straight dustcover and non-radiused backstrap (Contract Pistols will always be straight/straight) The 92FS (recent model) has a radiused backstrap and angled dustcover M9 markings (including proof markings and cage # markings) M9 lacks the warning to read owner's manual The rear sight of the 92FS has 2 dots, whereas the M9 has a single half-moon M9 (unless special or limited edition) comes in cardboard box, with no plastic hard case All model 92/M9/M9A1/96/90Two model barrels are made the same way. All other aspects of 92FS and M9 are similar/identical. This includes warnings and polymer coated parts.
-
Officially a Kool-Aid Drinker
Ha. I thought only the 40S&W Glocks were Kaboomers!
-
Officially a Kool-Aid Drinker
357Sig is a fun round. It is a pain in the butt to reload necked pistol cases. That is the only reason I didn't try one out. 10mm fills my bill for big boom.
-
Which one to buy - Russian 91/30 or Finnish M39
I'm glad you ended up with a keeper.
-
Which one to buy - Russian 91/30 or Finnish M39
I don't mean this an an insult, but I strongly suspect the "more paperwork" line was an attempt to get you to part with more of your hard-earned cash. IMO, charging $65 for a transfer is ludicrous and people should vote with their feet and wallet and force the business owner to change. I understand that an FFL wants you to buy the gun from him rather than just transferring it, but that price is beyond excessive. Lanigan's in Shrewsbury will never see my business for charging this same price. As members here know, I often buy and sell guns. I have shipped many pistols (via FedEx) and rifles (via US Mail) to FFLs. I enclose a copy of my Drivers License and NJ Firearms Purchaser's ID with the shipped firearm. This is all that is needed for their FFL log. There are many FFLs that refuse to accept from an individual. The only ones legally obligated to do business this way are in states like California (which may be the only state with this rule), where face-to-face firearms transactions are illegal. The ones who refuse to accept firearms from an individual are just choosing this as their policy. I personally do my best not to do business with them. When I sell a gun online, I add a line telling the buyer to find an FFL who will accept transfers from an individual. If that is not possible, they must be willing to pay an extra $35 for the transfer fee I will be charged to go through my FFL. Give Shore Shot Pistol Range (one of the sponsors for this site) a call. I believe they would accept the rifle from your seller. There are FFLs on this board, and hopefully they will expand on what I wrote. :Rant-Off
-
Picked up a PAP.
Speak of the devil... I talk about regretting selling my PAP, and the guy who bought it makes the next post.
-
Picked up a PAP.
The wood stocked ones are nice. They show up on GunBroker all the time for $499. A place in South Dakota called "The Attic" sells them. I bought one, sold it, regretted selling it, then bought another. They are well made (i.e. the receiver does not feel like it's made out of pot metal, like a WASR), fun to shoot, and accurate too. I was nailing tomatoes at 75 yards with iron sights without much problem.
-
NRA life member offers?
Well then... the Fall it is. That's good for me. I didn't really have the money laying around, but a bargain is a bargain.
-
Help me narrow down the wishlist (and choose my next)...
To Ken's point, here is a Mossberg shotgun combo. It comes with a short barrel and pistol grip for the home, and a long barrel for the field. Tough to beat for $300. There are certainly fancier guns out there, but I don't know if any are more reliable. http://www.budsgunshop.com/catalog/adva ... st%5B0%5D=
-
Brick Armory 6-09-2010
Suck it up and get out there Maks. It's not raining (yet)
-
Midway sale on Tipton cleaning rods
http://www.midwayusa.com/Promotion/defa ... e607201021 I like the Tipton carbon fiber rods. They are strong, and come with a plastic bore protector. I always hesitate to use steel rods for cleaning a barrel.
-
HK P30
Frank, That question has different answers depending on your intended uses. I have speer Gold Dot 124grain +P for my home defense pistol. I use regular old Federal American Eagle red box 115 grains for the range (while occasionally shooting the Speer to keep familiar with it). When Cabelas has a sale, I buy the PMC 9mm ammo (Sometimes the sale price is close to my reloading price on 9mm, so I just buy it.). If I didn't reload, and shot at a range that allowed steel/aluminum cased ammo, I would have no problem shooting it there. I used to use it in my AR (since sold), and still do in my AK clone.
-
HK P30
Aluminum and steel cased ammo can't be reloaded. Brass ammo can. The steel ammo is harder on the extractor and ejector because it is not as pliable as brass. I know that some people complain that accuracy suffers in steel cased ammo because the case does not expand in the chamber sufficiently to form a good gas seal. I always went with the notion that steel cased ammo is good for plinking. If I want something for accuracy/reliability, etc I would go with brass. I personally don't think it is much of an issue in a modern, duty style handgun. Your HK (like Glocks, Sigs, S&W, etc) are not finicky target models. They were built to feed and eject all kinds of ammo, and to withstand the abuse. Besides, with the savings from shooting the cheaper steel ammo, you will have more than enough money to replace an ejector or extractor should you ever wear the original out. If you don't reload, cheapie ammo allows you to afford more of it and practice more. Just remember, some ranges scavenge leftover brass and don't want to spend the time/effort sorting out steel/aluminum cased ammo, so they don't allow it (i.e. Shore Shot).
-
Shore Shot 6/8
It was just me and Bryan (and his family).