Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

tony357

NJGF Vendor
  • Joined

  • Last visited

Everything posted by tony357

  1. I have them aat the shed this year one female got away have yet to find it, the other female i got she ran right at me when i went to pick up a concrete block just happened to catch her movement and pulled away. she attacked the broom stick when i put it in the block to get her out instantly kind of cool to watch..I was surprised how aggressive she was..
  2. They look great in all black.. Im thinking about picking one up in 9mm i can shoot it without worrying about losing the brass. I did find 1 box of 34 rounds with 8 rounds of brass missing and he also had one box of brass 25.00 out the door was good deal for 41AE. So all in total i have about 750 casings of brass about 400 still new in bag i purchased back in 1990 from IMI.. SCORE.. Thing is that serbia ammo boxes look so much alike..makes it harder to see in mixed boxes when looking.
  3. 10-22's are great ton of accessories for them and not overly priced.. i went all out on one 15 years ago bull barrel fajen stock extractor mag release yada yada yada fun as all hell..
  4. saw an all steel tactical baby eagle today at oaks in 9mm very nice gun..
  5. I have an original made in isreal great gun, i ordered it in 41AE, brushed chrome..
  6. My daughter purchased crosstrek and she really likes the car..been about a year have not heard any complaints.
  7. setup dies and reloaded 100 rnds. setup was not to bad went from 223 to the 40 cal i ordered, setup each die one at a time in order, installed brass holding pins and press ran great no quirks so my initial setup was pretty good. IMG_1422.MOV
  8. correct. that is what im after and that is off the ogive. also want same depth in cartridge to have more consistent FPS.
  9. ran a test this morning and came to definate conclusion. I cut out 5 primer pockets seated and crimped 5 different length bullets. it was a .006 spread seating the bullets at the ogive yielded a .002 spread in seated depth in cartridge.
  10. Actually these bullets are running pretty consistent i would say 85% are within .002 i checked some other lead bullets i have and they have very large spread up to .017 The Ogive is where the rifling would pick up.
  11. I take it your not a reloader.
  12. Well based on me running out of ammo due to re-shoot and not checking boxes of ammo to see if they were full, no one was running 45 that i could find but there was plenty of 40 to be had..so i must say it appears to be hanging around for while..
  13. Sounds like it may have fired partially out of battery..
  14. I know the AOL, if you measure the bullet heads they have a .009 range difference, so if i seat them from the top they will all have a different depth of + or - .009 even though they all measure the same height, if i remember correctly the ogive will be more consistent. The AOL is 1.120 i am using. What i am questioning is the method of seating and what will yield best results for consistency..
  15. seating dies have round nose seat for round nose bullets that seat from ogive on bullet not top, there is also a flat top seat for flat top and semi wad cutters, i chose to seat the bullets by the ogive round nose seat. If you look at the pic of bullets you can see a ring where it pushed the bullet into the case.
  16. I may end up switching all my calibers over to the 650 XL loving this machine. I also really like these Dillon die's with the drop out insides to clean so you do not lose your adjustment. IMG_1422.MOV
  17. rolling out some 40's for new pistol i ordered, After measuring the heads they have a measured range up to .009 difference so i set up to set depth by ogive and not top hoping to have a more consistent load. I always use the ogive on all my round nose with the square deal but was thinking about maybe using top with the 650XL but changed my mind.. 180 RNFP 1.120 AOL they will not all be the same using conical but i think depth will be more accurate for an overall setup with chrono.. What are your thoughts ? or which method has yielded best results for you?
  18. it is not that hard, set up each die one at a time. it will take some time i just set mine up for 40 cal tonight. took me about 2 hours to set up start to finish including powder check.
  19. thanks i will next time..
  20. If they are TTY and you do not change them, you will be wondering which stop sign you may go through 1st.. If i order from my local GM dealer i usually have the parts by 10 am next day. Just sayi'n...
  21. tony357 replied to 1563621's topic in Handguns
    Very nice.. Is chambered in the classic 45ACP?
  22. Applied last week for 3 permits. Last time i did not use two of them.. always get at least three weather i use them or not.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.