Everything posted by DirtyDigz
-
Getting excited about my first AR build.
Package from CMMG arrived tonight, however it was just a parts kit and not the upper. Apparently from the handwritten note on the packing slip, the upper is backordered.
-
XS BigDot sights?
Had the XS big dot sights on my glock 26 for a while. Did *NOT* like them for distance/target shooting, and wasn't especially fond of them for close up shooting either. Could have been just me, but I was very in-accurate with them.
-
Now *THESE* are some mag dumps!
Notice that too KpdPipes? I thought I saw one of the M4's had a slam fire...
-
PMC 223 Ammo $6.49 Cabelas with $5 shipping
Ordered 10 boxes, thanks for the heads up!
-
Now *THESE* are some mag dumps!
M4 and M4A1 full auto mag dumps repeated until failure (barrel melt/burst on the M4, gas tube rupture on the M4A1). Sorry, can't figure out how to embed the videos, so go to the link and view them there: http://atwar.blogs.nytimes.com/2010/01/12/m4-and-m4a1-guns/?hp
-
4th grader busted for bringing a "gun" to school.
That's a deadly AK47!
-
Mesa Tactical Rail System for Rem. 870
Yup, a lot of crap to jiggle loose from recoil... I have a mesa tactical shell carrier on my benelli though, love it. Just use blue loctite on the fastners!
-
BUIS (Backup Iron Sights) Recommendations
Those are nice. I don't think I can use the front sight though. It is meant to be mounted on a handguard rail. I need one that mounts on a gas block rail. Remember that the Magpul MBUS are polymer, not metal, and may not fare too well on anything that gets smoking hot...
-
Getting excited about my first AR build.
Anyone ordered from this place before? http://dynamicarmament.com/ They've got good prices on AR parts, just wondering how they are on service/delivery.
-
Getting excited about my first AR build.
CMMG 16" medcon med-length upper with micro gas block ordered tonight. Guessing that will take a couple of weeks to come in. DD rail and AA piston kit should be arriving tomorrow.
-
Gathering interest - NJGF engraved AR Lowers
No harm no foul on my part, I appreciate the efforts to put the buy together. I'm going to consider myself no longer committed to this, but LMK if something else looks promising for a group buy.
-
Gathering interest - NJGF engraved AR Lowers
Ok, what's the status on this? If it's not going to happen anytime in the near future then I'd like to get released from my commitment so I can go buy another lower for my AR build.
-
Getting excited about my first AR build.
Haven't decided yet, but I'm leaning towards getting a fixed/solid stock as opposed to a pinned collapsible. Me too. Stupid NJ.... Anyway good luck, keep the photos coming as you get this thing together! Will do, will probably have a lull for a few weeks once I order and wait for the upper. Now, about that Spike's Tactical group lower buy....
-
Getting excited about my first AR build.
Haven't decided yet, but I'm leaning towards getting a fixed/solid stock as opposed to a pinned collapsible.
-
Ammo Storage
Store ammo in the safe all along the walls, firearms in the middle. It's getting really tight in there! Also use one of these "rechargeable" dessicant canisters: http://www.silica-gel.eu/engels/sg750-en.html Every month or so I toss it in the oven for a couple of hours to recharge it.
-
Getting excited about my first AR build.
Got my muzzle brake in today, first part I ordered: Adams Arms piston kit and Daniel Defense rail should be arriving in the next day or two. Now I just have to decide on a mid-length upper. Still leaning towards CMMG because I can order with a clamp-on gas block and not have to worry about cutting off a bayo lug and removing a pinned triangle front sight which I probably won't use again anyway.
-
Bullet Hole Sat. 1/30 ~11:45
Yeah, I had to wait about 20 minutes for a port, left about 1:00. There were empty casings *everywhere*, had to watch your step walking around.
-
Bullet Hole Sat. 1/30 ~11:45
Going to the bullet hole in about 45 minutes. I'll be wearing my NJGF T-shirt; if anyone else from the board is going, say hi!
-
Legal to have "Full Auto" Bolt Carrier?
The ATF letter that Caine linked to dated April, 2008, indicates to me that it is not illegal.
-
Legal to have "Full Auto" Bolt Carrier?
Thanks. Since this AR is going to end up as piston driven, I'll go for the full auto BCG then.
-
Good Deal on PMC .223
Nope, my order was for 9mm only. Heh, did you even read my post? No, I ordered all Winchester, I did not order any Federal. I received all Federal, a 100% substitution for the Winchester. It's actually better quality (for this low end range of target rounds), so I'm not complaining about the substitution.
-
Good Deal on PMC .223
Received a box from TMJ today. I ordered: 10 boxes of 100 round Winchester "White Box" 9mm 115gr FMJ. I received: 20 boxes of 50 round "American Eagle" manufactured by Federal 9mm 115gr FMJ. Am I satisfied?: Yes. Would I order from them again?: No way in hell.
-
Legal to have "Full Auto" Bolt Carrier?
I'm looking at buying a CMMG upper for my AR. They offer "Full Auto" bolt carriers as a free option. First off, is it legal to have a Full Auto carrier if the fire control group (trigger/sear) are still semi? Aside from legalities, any advantages/disadvantages to having a full auto carrier versus a "regular" one?
-
would not want to be that guy...
Squib, and then, what, 2 or 3 dud rounds in a row before the next one fired and blew the barrel/chamber? Making mental note to carefully examine any ejected round that fails to go bang to make sure the bullet is still seated in it...
-
How do you feel about the ACR pricing?
I was holding off on my first AR build to see what they were priced at. I am now embarking on my first AR build without worrying about the ACR any more.