Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

67gtonut

Administrators
  • Joined

  • Last visited

Everything posted by 67gtonut

  1. Yes.... just noticed car is under warranty..... Find another dealer or speak to Service Manager. It has a bad coil..... covered.
  2. I watch it all the time.... I like the host..... adds a little humor. Note to self..... NEVER travel to Richland Co. S.C.
  3. Ignition coil - these days..... 1 per spark plug, mounted right over each spark plug.
  4. Rare to have Fuel Injector issues these days......and for it to only 1 cylinder. Msifire's are usually coils going bad. If light comes back on swap coil around with another...... when it misfires again, I am betting it will move to where you moved the #3 coil.... If it does..... replace that coil.
  5. http://www.tactical-life.com/news/sig-sauer-p320-dallas-pd/#sig-p320-2 No issues with P320
  6. Figure I would do a current entry.... I have been dealing with a No Start, No Crank Issue at times with the car. Seems to happen after longer drives, obviously with everything getting heat soaked under hood.... I would go to leave a Cruise Night and I would get NOTHING...... when it happened last year 2-3 times, there was not even a click from the starter. I already had a Powermaster Mini Starter, but I bit the bullet and bought a new one, and sent the old one back to Powermaster to have it rebuilt. Fast forward to this year...... thinking I had the problem solved. I went to a cruise night in Flemington 2 weeks ago.... 90+ min drive. Got there, started to rain..... went to leave after about an hour and No Start, No Crank....... crap. After a few minutes like always, it cranked fine and I headed home. Pulled into the garage, turned it off and tried to restart..... Click...... crap. Frustrated, I headed into the house and would deal with it in the morning. Well, as usual, it started fine in the morning, but I check battery voltage.... 13.2v sitting, and only dropped to 10.5v while cranking, not bad for a 15+-year-old Optima Battery. So I felt battery was not the issue. I highly doubt the new starter was an issue. It was time to look in other directions..... wiring and grounds... Well, I removed the positive cable that runs from Battery to Starter..... this was a nice fancy Steel Braided 4ga battery cable. Well, it looked like hell now, with plenty of green corrosion coming through the steel braiding, plus I found upon searching..... 4ga wire might be good for today cars, but will not carry enough amps for older muscle cars with larger engines. So instead of trying to find larger gauge battery cables the correct length..... Time to learn another skill. So I went ahead and made up my own battery cable. and then made up an additional ground cable. The new cable is very high grade and is 2ga. Just got done installing it...... Now, lets hope for the best....
  7. Will post some more stuff in time..... get into some of the aftermarket mods on the car....
  8. Well..... Time to wrap up the paint job portion.... Car was done.... in about 90 days, start to finish, quite an accomplishment for something that was supposed to be a "side job" .... Thanks for everyone who took the time to read through this..... any questions, please ask away....
  9. Ok..... set up for now..... will do a more permanent mounting later today... Question............... Would you guys apply the supplied sticker to a window stating that live monitoring exists?
  10. Just picked up the Arlo Q Will set it up tomorrow.....
  11. I appreciate all the comments and advice...... Yeah..... just trying to keep it simple.... After reading tons of reviews and articles on the cheaper cameras..... there is a pattern. Most reviewers are thrilled with what they chose..... then there is a small selection of people that cannot seem to set up their camera and get frustrated and write a poor review..... I am going to chalk some of those up to User Error....
  12. The more I look..... the more options there are... https://www.amazon.com/D-Link-Camera-Remote-Viewing-DCS-930L/dp/B00452V66G/ref=sr_1_10?s=electronics&ie=UTF8&qid=1499102917&sr=1-10&keywords=wifi+security+camera https://www.amazon.com/IdeaNext-Wireless-Security-Surveillance-Network/dp/B01HO4SHJA/ref=sr_1_7?s=electronics&ie=UTF8&qid=1499102917&sr=1-7&keywords=wifi+security+camera
  13. Any thoughts on this one? http://www.bestbuy.com/site/d-link-hd-wi-fi-camera/5386102.p?skuId=5386102 Not trying to cheap out..... but if it does the job, why pay more..... Otherwise it seems Arlo is leading the way...
  14. Have not had a problem yet..... but now I bought a QuickLift, and between that, the tools and of course the GTO.... I would like to just get a single wifi Camera to monitor if someone enters my garage.... Thinking of the Arlo at this point.... http://www.bestbuy.com/site/netgear-arlo-q-wi-fi-hd-security-camera-white-black/4637600.p?skuId=4637600 Just want one camera that can be monitored from a smart phone....
  15. Wife does not like guns, just seems to have no use for them or what they represent to her. I do not pressure her, I respect her choice....
  16. Pictures will say it all... With the roof done, it was time for the main color. All I can say is the painter wanted perfection. He even did the right side over, because he was not happy with the first application.... Enjoy the pictures...
  17. HE.... Going to Google Photo..... works well
  18. Thats all well and good..... but what about what it looks like on a PC...... I dont care about the app... Where are the folders for sorting and storing photos in an organized matter....
  19. Well..... so far all my links are active....
  20. So whats going to happen on 7/28..?... I assume they will just kill the links to the 3rd party postings...... but our PB should still work fine for storage.......
  21. Yeah.... I looked at the website today...... Very little info as far as photo storage, so I did not go any further.... For now.... sticking with PB, until something better comes along, or someone can explain how Imgur works
  22. Get a room.....
  23. Yep..... just got done with $300 upgrade to Patron
  24. So yeah..... when I was searching for my GTO..... I wanted either White or Silver with a Black Vinyl roof..... and I was happy with the look..... But..... a few years before I painted the car, I went to the Atlantic City Car Auction and walked past a 67 GTO in the Convention Center that was a beautiful light blue and a painted white roof..... I had never actually seen a Two-Tone GTO, and upon further investigation found that you could order the cars like that, and the factory two-tone cars left the vinyl roof trim and just used paint instead of vinyl on the roof.... It really was a neat look.... And I vowed to try the look on my car whenever I had the car painted. It was an easy decision because I would be retaining the trim, and if I hated the look, all I had to do was scuff the roof and lay down the new vinyl roof.... When I made the decision to do it..... I got a TON of flak from everyone that I was crazy..... that it would not look right.... but I stuck to my guns.. Well, when it came out of the paint booth with the roof painted.... I was sold 100% that it would be staying that way. Once the car was completely painted, everyone actually apologized and said it was an awesome look. To this day..... I really think it's what sets my car apart from other cars as shows and cruise nights....
  25. So as you can see by the pics, I had uncovered some issues that were covered by trim. Once removed and blasted, the ugly came out. Areas of rot - Bottom of both front fenders behind front wheels, Bottom of 1/4's behind rear wheels, Panel behind the rear window, and finally the rear sail panels on each side of the rear window. All common areas of trouble for this type of body style. Good thing is, all areas the aftermarket has addressed with prefabbed patch panels....... Except for the Sail Panels. But one thing my body guy did was not use the whole patch panel, he cut down each panel to just use what was needed. The panel behind the rear window we did use the whole replacement panel, it was needed. To address the sail panels he had to do old school, he fabricated his own metal panels and welded them in, he did a wonderful job. Once the metal work was done, the car was then sealed with Primer and made ready for paint....

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.