Everything posted by Malsua
-
Aviation Fuel in my car
I used to swing by the airport before heading to the track and fill up on 100 octane but of course the engine was a 289 and had no cats or any other pollution control on it.
-
is the lc9 accurate..
I have to admit, I only shot Dan's. Probably the worst trigger I've ever felt on a gun built in the last 20 years.
-
is the lc9 accurate..
fixed it for you
-
Shots fired at capital building
As to the topic, they have the woman's baby so either she was black or the baby daddy was.
-
Synthetic Oil in Vehicles
I never changed the Radiator fluid in my 1992 Honda Civic. I sold it to a friend in 2008, he didn't change it until the bottom of the Radiator rusted out. It was still bright green and tested to -30 below. Of course when I sold it in 2008, the vehicle had 37,500 miles on it. When the radiator rotted out, it had around 80k miles on it and that was in 2011. I guess my point is, is that mileage seems to be what destroys the coolant rather than time because at 80k miles and 19 years, it was still just fine.
-
Synthetic Oil in Vehicles
2010 or older Turbo Subarus and mobil 1 or Royal Purple have known spun bearing issues. Rotella T6 is the oil you should run in your older Turbo Subaru. As far as one vs the other, I ran dino in my WRX for the first 70k miles and drained at 2500-3k and I have the service records to prove it.. At that point the turbo failed. The first thing the dealer said "that's usually due to lengthy oil drain intervals". Once I dropped the service notebook with 30+ receipts that show it was done at usually 2700 miles, I didn't hear another word. They just fixed it under warranty. My WRX has No tune, and is mostly old man highway driving. I've run T6 since then, no issues to report other than better cold starts, no weird cold weather noises, etc. I've always run Mobile 1 in my 2004 Dodge Ram 2500 and it is what I run in my wife's Civic and I do 10k changes.
-
Breaking Bad season finale tonight
I thought it was as good a way to end it as any. That #$%^% Lydia dying a slow and horrible death is perfect, but that one was predictable. The focus on "stevia" every time they were at the tea shop was a major giveaway. Stevia is not legal in the US as a pour in sweetner, so that's a factual goof. I notice that the bullet holes were high from the car to the building...seems like it should have done a few head shots
-
Breaking Bad season finale tonight
The first 4 seasons and half of the 5th are on Netflix.
-
Installing a wood burning stove in a fireplace?
You're talking about the Damper? The metal flapper that closes off the pipe when the fireplace is not in use. Yes, this has to go. Perlite has the the feel of squishy stone pebbles. It will absorb water but will release it if heated. Do not use vermiculite. Vermiculite is similar to perlite but can become water logged. Bad mojo there. The liner then connects to the insert/stove. You should use stainless the entire way. You want the surfaces to mate properly and have the same expansion coefficients. Do not cheap out on the liner. If you can't afford a proper liner, you can't afford the project, it's as simple as that. Shortcuts will get you a chimney fire or worse. Don't skimp.
-
Installing a wood burning stove in a fireplace?
My fireplace is stone masonry. Any of the heat that isn't sucked out by the fans winds up in the stones. They help average the temperature by absorbing heat when the insert is really hot and giving it back when the insert is cooler. I would expect that you don't get that effect in a stove...i.e. the stove goes cold, it gets cold in the room much faster.
-
Installing a wood burning stove in a fireplace?
Pellet stoves are nice, my mom has one. It does not put out as much heat as a similar wood stove and the auger has broken twice in almost 20 years. It is cleaner by far and you don't have to deal with firewood. It's easier to control the temps you want and keep the temp more stable.
-
Installing a wood burning stove in a fireplace?
You need a stainless steel liner. It goes inside the flue if your flue is in decent shape. If you have to knock out the flue, you're rebuilding your entire chimney. Once the liner is installed, insulate it with perlite. Stuff the bottom of the chimney around the liner with fiberglass insulation and pour in the perlite. If you have a 6 inch round liner and a 8x10 flue, you'll need 1 cubic foot of Perlite for every 3 feet of chimney. Cap the flue at the top with steel and seal it. The liner will need something on the top of it. Get one with screens, we've had birds end up at the bottom of ours. You MUST insulate the liner otherwise it will clog up fast at the point it is exposed to cold temperatures. I would avoid the flex liners if you can. I bought my extension liner here: http://www.chimneylinerdepot.com/store/clbrd/903/category/Rigid-Chimney-Liner.html That place has the best price and shipped same day. I recently added 6 feet onto my chimney, this is how I have such specifics. Edit to add... Many chimneys have a clay flue liner...mine was 8"x10". The stainless liner goes inside the clay liner.
-
Laminate flooring question
I did something very similar when I did the flooring in my bedroom. Does the picture help? We went from the far wall and installed to the camera. The boards on the near side of the stairs had to be ripped to match the ranks on either side.
-
Installing a wood burning stove in a fireplace?
There's nothing wrong with a fireplace insert(I have The Earth Stove, it has 4 circulation fans). I heated my house with one for almost 15 years. We had a little electric heater in the bedroom and one in the crawlspace set very low, other than that it was all firewood. I burned 5-7 cords of wood yearly. The difference being the quality of the wood I burned. If I had Oak and Maple, and well seasoned, I used less. Poplar, ash, sorta green, whatever and it took more. It's a pain in the butt, it's dirty and you'll need your liner scrubbed probably every 3 months during the winter. Usually started burning at night in late September and then the fire that started October 15, burned non stop until about April 15 and then went part time again. It's also nice to walk around the house in shorts and a Tee-shirt when it's 0 outside. I installed a hot water baseboard, high efficiency propane boiler when I did my addition in 2012 but we still burned 3 cords last winter in the insert to help with fuel bills and for that "it's hot in here" feeling. It's definitely worth it to get a wood burner of some kind and have it installed properly.
-
Any tool fans?
I love tool, and this is a pretty good cover. Lets face it here, no one can do Maynard but Maynard. That said, if you watch "Blood into Wine", you can start to understand why Maynard is the way he is. It also turned me on to Puscifer since the song "The Humbling River" runs at the end.
-
Generators
I remember when you had to puncture the cardboard/tin cans with the spout and it made a huge mess. heh.
-
Generators
It depends on the additives. Unless an oil is advertised as low or no ash, it's not. For Mobil 1 synthetic, you have to get "ESP" to have low ash.
-
Generators
Looks like it's going to head out to sea.
-
Generators
The short of it is that when Natural gas and to a somewhat lesser extent propane burn in an engine, by products are different than when gasoline burns. Nat gas and LP interact with the oil and essentially will varnish the inside of the engine and starve surfaces of lubrication. Valve seats, rings, etc. This will ultimately lead to poor engine performance, burning oil and lots of blowby. It's NOT really a big deal for part time generators that run for less than 50 hours in a five year span. However if you want your generator to last longer than you, just use low ash oils and it will extend the life of the genset.
-
Generators
Speaking of...did anyone notice the Euro Model for this weekend? http://weather.unisys.com/ecmwf/ It's showing a pretty significant Nor'easter type of storm running up the Delaware valley after coming ashore around the Delaware bay? GFS is showing nothing, so it may be nothing, but if I were going to get ready for a power outage, now is a good time.
-
What to do with a rifle after 1500 shots?
If you've got enough bank to shoot out a barrel, the cost to replace it won't bother you much.
-
Travel with Guns Warning
Hence the reason to pack the dirty underwear on the return trip right on top. Call it the skid-mark deterrent.
-
Active shooter dc navy base
Is it sudden Jihad syndrome? Zawahiri was recently asking for stepped up attacks.
-
Coyotes
I've been at this location 17 years and I can say for sure, I've never noticed the cotote's obvious presence before. I'm sure they were around, but not in quantity and not making themselves known.
-
Show us What the inside of your Safe looks like.
I'd have to join the choir of no votes.