Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

BigBlueQ

Members
  • Joined

  • Last visited

Everything posted by BigBlueQ

  1. Welcome from Bergen County!
  2. Congratulations to you and your wife! (Also to all of the other imminent dads and moms on these here forums!) I have two daughters, 7 and 5. They don't play sports, but they both dance. I wouldn't trade either of them for a guaranteed NFL quarterback.
  3. Update: I went ahead and tried it on the trigger guard. I first tried to "crimp" one end slightly, then put Tetra grease on that end. Using the narrower diameter punch, I inserted the punch through the pin and lower and guard holes, aligning them. A couple of taps set it, and I finished the job with a roll pin punch. Success!
  4. Welcome to the forum from another Bergenite!
  5. Thanks Frank and everyone at NJ2AS! From your newest member.
  6. BigBlueQ replied to jds560's topic in Handguns
    That's gorgeous! Although I started with two Berettas I also picked up a BD about a year ago, maybe longer. Quite frankly, that pistol is hands down my favorite. It's almost impossible to have a bad shot with the CZ, it's so good. And you have the police model, lucky duck. Congrats, you made a VERY wise choice!
  7. I'm in the process of building my first AR and of course there are the roll pins to install. Some have recommended using needle nose pliers to hold the pin in place, others swear by the roll pin holder, for good reason. I was thinking, however, about using a smaller punch diameter, slip it through the roll pin and into the hole. For argument's sake let's say the trigger guard hole with the trigger guard in place. That way the punch can extend into the hole on the lower and the guard, aligning the roll pin at the hole, and it will give you area (at the base of where the thin punch meets the handle of the punch) that can be used to "push" the roll pin in when struck normally at the end of the punch. It seems like an easy solution, but my only concern would be that the base (larger than the pin) that was against the pin may deform the end of the pin. But wouldn't a larger sized punch used at the end of the pin do the same? Don't know, haven't tried it yet. Your thoughts?
  8. Thanks for the shout out:)
  9. Welcome from Ramsey! Where to go depends on your location. I'm fortunate to live in a town that uses the Waldwick range for police qualifications. The agreement amongst the towns that use that range allows a limited number of non-Waldwick residents each year to apply for membership. Check the the Waldwick Pistol and Rifle Club web page to see if you reside in one of those towns. Pistols and pistol caliber rifles only, but you can also test out your shotgun if need be. Good luck, and welcome!
  10. Plus you get the benefit of Rifleman1's avatars!
  11. Welcome from Ramsey!
  12. Welcome from another Bergenite! It's good to see so many from Bergen joining!
  13. My seven year old girl is named Reagan. When anyone asks her who she's named after she shouts, "Ronnie!" That's my girl!
  14. An update on my build... I went with the BCM low profile gas block, and the Spike's Dynacomp. For a free floating rail I ordered the Samson Evolution. I also ordered and received the Magpul BUIS, front and rear. I still have some parts shipping, but here's the kicker... THE EFFING USPS LOST MY COMPLETE BOLT CARRIER GROUP FROM MIDWAY! It was an AR-Stoner, and fortunately I have a stripped Phase 5 Bolt Carrier in Electroless Nickel, a gas key to install, and one of the RRA bolt assemblies. I also have a Fulton Armory stripped bolt carrier with a gas key to install and another RRA bolt assembly. So I do have the parts for two BCGs, but boy am I pissed. It shipped on 1/23/13 from Midway in MO, via UPS, took 2 days to get to Teterboro mail distribution center, and vanished. There is NO contact info for the center, and Midway had no luck contacting them as well. I'll wait for a few more days, and then Midway will reimburse me if it's not found.
  15. Welcome to the forum from a fellow Bergenite!
  16. Welcome from 10 miles north up 17!
  17. Welcome from another Bergenite!
  18. Hmmm, knowing this state the NJ Supreme Court will rule that due to the circumstances Christie has no authority to appoint a new senator, and that the people really want Torricelli in there.
  19. I agree about the BCG. Quite honestly, I was looking for a .223 Saiga in early December, thought I found one in stock online, ordered it and got an email saying that it actually was NOT in stock. After Ct. I started looking for parts for an AR build, but always seemed to be 3 minutes too late on items like the BCG. I'm on the notification list for Bravo, but I'm not always near a computer when any notifications come in. That said, I figured I'd build the BCG from scratch for now, and when stock fills back up (hopefully within the year!) I'll purchase a complete BCG, hopefully from Bravo, and use the separate bolt and carrier as spares if needed.
  20. Thanks to you all for the input. I was also considering the Spike's Tactical Dynacomp or the Griffin M4SD II Tactical Compensator. Both have great reviews, and are comparable to the Battle Comp, but easier on the wallet. The Spike's is pre-drilled for pinning and welding, but the Griffin is not. However, the Griffin is made out of 17-4PH stainless steel while the Spike's is made out of 303 stainless steel, which may be less durable. (I am not a metallurgist, nor do I claim to have any idea what these stainless steel numbers mean. The Battle Comp seems to be the standard in this range, and the Griffin is manufactured with the same steel.) A lot of you seem to like the Spike's, but I haven't found too many members here who have used the Griffin. I would be leaning towards the Griffin from the reviews that I have read, but will there be a major issue getting it pinned and welded if it is not pre-drilled?
  21. I've saved my 400th post to share my ideas about my first build. Although I've dabbled in replacing parts in my pistols and rifles, this will be my first "from scratch" build. I'm still missing a few parts, but I've been trying to piece together some good components: Code Red lower BCM Upper Receiver - M4 Flat Top (M4 Feedramps) BCM Standard 16" M4 Barrel, Stripped PSA MOE Lower Build Kit BCMGUNFIGHTER Charging Handle (5.56mm/.223) w/ Mod 4 (MEDIUM) Latch Magpul AFG2 (Angle Forward Grip 2) Complete RRA Bolt Assembly Fulton Armory stripped M16, GI Bolt Carrier I still need the remaining parts for the bolt carrier, middie gas tube, gas block, handguards, sights, and muzzle brake. Any thoughts, good or bad? Recommendations? I'm thinking of the Magpul MOE handguard, BCM low profile gas block, and maybe a Surefire Muzzle Brake. Please let me know if I'm forgetting anything, your input would be much appreciated!
  22. Snake Plissken would have a hell of a lot easier time getting in and out of that version. Nothing firing at him!
  23. The symbol for "Therefore? "

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.