Everything posted by joshg138
-
AK Variant Single Stack vs. Double Stack
I'm far from an expert, but to the best of my knowledge it is perfectly legal to purchase a variant that allows double stack mags. The problem you may run into are FFL's that are afraid/unwilling to do the transfer.
-
a few pics
I was a little bored, so I took some pics of my 2 handguns. First, the CZ 75B (9mm) And now, the XDM-40
-
Pictures of AK's
Back in October I picked up a MAK 90. I meant to post pics, but I never got along to it. It may be a little overdue, but here you go. I replaced the furniture with a walnut stock, grip, and handguards from Ironwood. The small mags are from Tapco, the 15/30's are from Glenn's group buy.
-
15 round AK-type magazines
Is there any benefit to 15/20's over 15/30's? Count me in for a pair of 47 mags if this group buy goes through
-
Pictures of AK's
:laugh: :laugh:
-
AK's at CR
+1 on modding the safety selector. It was really easy to do and only took about 15-20 minutes with a dremel. Here's some step by step directions. http://hunting.about.com/od/guns/ss/ak_safety_notch.htm
-
Mak-90
I used Matt at Constitution Arms in Maplewood to transfer mine. He just wanted me to be sure that it was NJ legal before he would do the transfer.
-
New Essex County Member
Welcome from West Orange!
-
Glocks or XD's
I have no experience with the m&p, so I can't comment on that. I found myself asking this same question a few years ago when I was looking to purchase my first pistol. What I really loved about the Glocks was the ease of use and myriad of accessories available. When I tried the XD(m), I really liked the striker & chamber indicators (2 things I think the Glock lacks). What it came down to was comfort. I have small(ish) hands, and the glock just felt like a brick in my hands. I read a lot about both of these guns, and I don't see much argument about one being significantly better than the other. I suggest testing them both out (if you can) and choosing the one that is most comfortable for you. That's my $0.02
-
CZ 75 mags
I just checked out the CZUSA website, and they have a special on 15 round Mecgar CZ75 mags. They usually sell for $40, but right now you can pick them up for $24.99. http://shop.cz-usa.com/SearchSaleItems.aspx
-
mac 90 jersey legal ?
That's exactly it. IF there were ever a problem, at least there is a CHANCE that the engraving would help.
-
mac 90 jersey legal ?
I picked one up in October from Gunsamerica for about $500. I put some money into it and replaced the thumbhole stock with a walnut stock & pistol grip Ironwood. It has a welded on muzzle nut, so it certainly meets the NJ evil features requirement. Once I replaced the stock all I had to do was put in a Tapco double hook FCG and ironwood hand guard, and there you go...922 compliant. Thanks to glenn, I have 2x 30 round mags that have been blocked to 15. Just to be on the safe side, I used my dremel to engrave CAP 15/30 on them. I didn't want to, but the last thing I need is any trouble with mag capacity. I also picked up 2 Tapco 10 round mags. They needed a little filing to fit well, but once that was done, they fit perfectly. I absolutely love it. Now I'm thinking about converting a 5.45 Saiga.
-
WASR-10 article
I found this article today during some down time, and thought it should be shared. It is a fairly nonpartisan journalistic piece about WASR-10's making their way from the US to Mexico. It touches on a bunch of topics (straw purchases, 922r, AWB. I found it pretty interesting and informative. At the very least, it should be interesting http://www.publicintegrity.org/articles/entry/2857
-
decided to ask you guys for quick prayer
I'm sending out some good thoughts your way.
-
FINAL CALL FOR 15 ROUND AK MAGS
Mags arrived today. 15 rounds fit fine...now I just need to get to the range to test everything out! Thanks Glenn
-
Looking for a buttplate
I went thought desert fox sales and picked one up, along with some other odds and ends I needed. I'm thinkg about heading to the Valley Forge show in December, if there are any other little things I need, I should be able to get them there. I'm just afraid that the things I "need" will make me leave the show with $1000 less in my pocket.
-
Looking for a buttplate
I'm working on my new Ironwood stock, and I was test fitting all the pieces and discovered that my Tapco buttplate won't fit on the new stock. My guess is that the Tapco buttplate is not a standard AK size. The problem is that I'm having a hell of a time finding a replacement buttplate. Anyone have an idea where I can find them?
-
replacing trigger group on Mak 90
Once I realized that the shepherd's crook was the problem, the whole conversion was really easy. I have a Tapco stock and Tapco SAW grip on it, but those are just temporary. I got a black walnut furniture set from Ironwood that I'm in the process of finishing. I'm keeping all the original parts, and the only permanent mod I made was cutting a notch in the selector switch to make a bolt hold open. I still haven't had a chance to take it to the range. I gotta get on that.
-
New Mak 90
fI just sent in my order to ironwood yesterday. Now I just have to wait. I hate waiting
-
New Mak 90
I tapped in the pin and it is much more secure now. Thanks for the tip on using steel wool. I'll try that later this week. I'm not thrilled about the stock either, but since I'm planning on replacing it with wood in a few months anyway, I'll deal with it.
-
New Mak 90
I picked up my Mak 90 last week, and I spent the last few days doing a little work on it. I got rid of the thumb-hole stock, and replaced it with a Tapco SAW pistol grip and an Arsenal buttstock. I also replaced the fcg with the Tapco G2 double hook fcg. The only thing that was any major trouble was the buttstock. The tang on the receiver stopped it from being fully seated within the receiver...there is a 1/8 inch gap between the buttstock and receiver. It isn't perfect, but since I plan on replacing everything with wood furniture at some point (I'm thinking about the Timbersmith brown laminate), it is fine for now. There are 2 things that I have some concern about. 1) The bolt carrier seems to be discolored/corroded. Is this a problem, or just normal wear and tear from a 20 year old rifle. 2) When I was field stripped the rifle, a pin came halfway out of the firing pin assembly. I was able to remove it with no resistance. I wiped it clean and reinserted it. This doesn't seem like something that should happen. Am I right to be worried? I circled the pin on the last picture.
-
replacing trigger group on Mak 90
I got it from AuctionArms for $475. Here's the auction link if you want to check it out. http://www.auctionarms.com/search/displayitem.cfm?itemnum=9935593&oh=216543 The same seller had one on Gunbroker that was in slightly better condition for $600, but since I wanted to change out some parts and I'm on a budget, I went with this one. I've done a bunch of research, and for my budget, the Mak really was the best bang for the buck. Today I've got some ammo coming in from cheaperthandirt, and I need to work on installing the tapco stock, and then I just need to get to the range. It has a stamped straight cut receiver, and I'm thinking about getting a nice stock set from Ironwood or Timbersmith...but that's down the road a bit. Sorry, but I'm going to hold onto the thumbhole stock. If I do end up selling/trading it in the future, I want to have all the original parts to go with it.
-
replacing trigger group on Mak 90
I finally figured out the shepards crook. Once I did that, everything was pretty easy. The safety came out easily, once the trigger assembly was out, so I just had to reverse the order a bit. Everything is now good to go. I've had the Mak for about 5 hours, and I've replaced the fcg and pistol grip. Now I just need to file down the buttstock a bit to get it to fit right and I'll be good to go.
-
replacing trigger group on Mak 90
I just got a Mak 90, and I'm trying to replace the fcg with a Tapco G2. I'm having 2 problems right off the bat: 1) The safety won't rotate to the position where I can remove it 2) I can't remove the pins that keep the fcg in place. Anyone have any tips?
-
Czech 8mm
Good Eye tony. Thanks