Everything posted by n4p226r
-
New Pump AR from Troy
I suppose the upper can have a flash hider and a bayonet lug. But I wouldn't chance the lower with folding stock if it's a standard lower
-
Shortest length NJ compliant muzzle brake
battlecomp specs list it as 2.125" and it adds 1.6" of overall length to give you 16.1" total on a 14.5" to really confuse you, some 14.5" barrels are actually 14.7" if you want to be exact so you need to figure out what your actual barrel is first. so you are really looking for a comp with an overall length between 2.125 and 2.025. i don't see any muzzle brakes or compensators that have less overall length than 2.125 and i assume that you may have a slight variation with that primary arms FSC 2.33" lantac dragon 2.57" smith enterprises 2.25" BCM mod 1 (can't find overall length but said to add about 2") etc. the great news is that if you are looking for a combination that works and works well, a 14.5" barrel and battle comp will be the best. i can measure the overall length on my noveske with that setup but don't know how i would accurately measure the barrel .
-
Good Entry Level "Off The Shelf" Buy
not really. as compared to most, i consider myself a noob when it comes to ARs as well. But i have done years of research (web searching) and read lots of reviews from people that use these in real life, in classes, or have thousands of rounds of experience. I've got to look over a large number of brands and guns and for me it's come down to 4 brands that i'd most likely look for when buying parts or complete rifles. colt, BCM, noveske, and daniel defense. it's hard to put it down on paper what the difference is between different guns of the same spec but when you hold them and shoot them it feels more apparent. for example, i've heard that BCM gas ports are on the small side and PSA are on the larger side. the advantage PSA will have is that with really cheap underpowered ammo, it will no short stroke it. the downside is that it's not as soft shooting of a gun. and the ejection may be more erratic. the BCM, with quality ammo, will most likely be able to put all the brass in one small area in the 4 o clock position. you can tune the effects of both gas systems with buffer weights but generally a mid length with the smallest gas port and heaviest buffer your lowest power ammo will shoot reliably will be your best shooting rifle. i'll be honest. the PSA would do 100% of everything i do with my rifle. i clean it, take it to the range, shoot it for 100-200 rounds, repeat. I'm sure its good enough for almost everyone here that doesn't use it as a duty gun. if a bolt brakes, i could replace it and still be in slightly cheaper than the BCM. if we are talking lower parts kits, that i see a significant increase in quality you can visually inspect when going with the top tier brands.
-
Good Entry Level "Off The Shelf" Buy
I'm not sure. I assumed heavy meant something like the socom or hbar style
-
Good Entry Level "Off The Shelf" Buy
The biggest difference will be the bolt carrier group choice and gas port size. The bcm is most likely gassed slightly less than the psa since the psa wants maximum function on the cheapest of ammo. I've heard good things about the fn barrels so I'm not going to say anything bad about them. Its probably true that the psa will do everything for you the bcm will do. Especially if you get a quality bolt like a bcm for $180. Since that is the part most likely to fail. That bcm will bring the price difference to $200. ARs are simple things with not much to differentiate with them. Especially since the receivers come from a few forgers and many companies farm out the machining work and are mainly assemblers. Bcm recently decided the upper receivers they got weren't high enough quality for them so they decided to source their parts earlier in the production process and have more control over the final finishing stages. It's things like that you can't see on paper and may not see in person.
-
Shortest length NJ compliant muzzle brake
i think if you want to get a 14.5" labelled barrel just get any of the usual suspects. my choice would be battle comp 1.5, if not get the BCM or FSC556. pin it, call it a day. done pick it based on any of your most desirable trait (muzzle control, flash suppression, side blast, looks). 1/8" should be the least important
-
Good Entry Level "Off The Shelf" Buy
you are comparing a budget upper to a top of the line upper. i can't quantify the value of the one over the other. the BCM is $810. that comes with everything you need except shaving the bayo-lug . so figure another $30 for that. your first link, if you wanted a heavy barrel (i wouldn't), to be equal to the BCM still needs a bolt carrier group $180, a backup sight $40, a charging handle $40, a compensator $50, the bayonet lug ground $30, the compensator pinned, $30 and turns out to be 17.5" thats for a savings of less than $200. plus the MOE hand guards are nice. i wouldnt even feel the need to upgrade them honestly. the last one is probably the best bet, but you are still almost $200 to make it compliant. leaving you about $200 less than the BCM. i'll even put my money where my mouth is. get the BCM, find a place that will grind the bayonet lug off for $25 and i'll send you the $25
-
New Pump-Action AR-15's
not in NJ. the magazines are illegal. not the gun.
-
80% AR15 or AR10 experience
even if they have, nobody will admit to it, since its not legal to complete in NJ.
-
Video of Unreleased Ares Defense SCR surfaces
i'll be honest, i don't hate it.
-
Good Entry Level "Off The Shelf" Buy
yea. the bayonet lug shouldn't be more than $25 to $30. its literally a 5 minute job and some color applied over the ground area.
-
Sig P228 West German Up In Value?
It implies it's an awesome gun just newer and not as collectible but way better than the m11-a1
-
Good Entry Level "Off The Shelf" Buy
Bcm is the way to go. But you still need to shave the bayonet lug. Although for not much more you can get a 6920 and have to make it nj compliant. I'd still choose the bcm with a quality lower. And while I chose a battlecomp on my upper, I see no reason to choose that or the dynacomp over the bcm when you can get the bcm from the factory that way.
-
SAF v NJ (MULLER et al v. MAENZA et al)
. I assume you don't own any stocks then? Because most places probably get a feed from bloomberg
-
Post PICs of your SPR style rifles
are you ever in northern NJ? i have some aero-shell grease and just got in today a few containers to split it up into half oz sizes.
-
pretty much decided i want to go with night force nxs 2.5-10x32. which reticle?
5.56 AR. 18" barrel. i doubt i'll use it for much longer than 200-300 yards for now just based on thats how far we have around here to shoot but i wouldn't mind trying out to 500.
-
pretty much decided i want to go with night force nxs 2.5-10x32. which reticle?
seems pretty simple. I'm leaning towards mil-r and mildot but I'm not against any of the reticles since i know so little about it. i can use any of them. thoughts?
-
Thoughts on this stock for an SPR
so at its shortest it is a2 length. if i feel the need for a cheek riser, this may be the way to go. although i have a feeling both this and the A2 will be a little long for me
-
Thoughts on this stock for an SPR
How long is the stock at its shortest compared to a1 or a2 length?
-
How much did your build cost you?
more than $2k but less than $3k with micro t1 and mount. the truth is i don't really know. i did buy the lower right after sandy hook and paid a small fortune for it. when i added everything up last time, it was weird, because i came out only slightly more expensive than if i ordered it from the factory. and the factory rifle wouldn't have had a geissele trigger or ambi safety. so really the only difference is i didn't have a spare safety or gi trigger. my second build so far has been $140 for stripped upper $170 for lower $130 for colt lower parts $70 for bad-cass $180 for Geissele SSA $150 for colt A2 stock and colt forged receiver and buffer and spring (all colt) $180 for BCG $45 for charging handle $30 for grip i figure i have left $500 barrel $270 rail $200 iron sights $240 scope mount $1650 optic
-
Post PICs of your SPR style rifles
nice. I'm glad you posted that pic because i am considering the same scope for my SPR style build and wanted to pick up a mount. i didn't know if i should get the offset one or not. looks like i should. now i just need to decide on the reticle. i know nothing about long range shooting so i need to learn how you use the reticles before i make a decision. is that scope also illuminated?
-
My first AR build
nice looking rifle. definitely add a light. even if you never use it. it would be helpful getting used to it being there in case you add it later. I'm not sure what solutions work on a MOE but you can probably get a nice mount and any regular flashlight.
-
Is this muzzle device legal??
I think this happens more often than people think. I may know someone that unknowingly bought a similar armalite thatat have had an unpinned flash hider from a store in south jersey that recently opened a new range. I don't believe he told them. I think he just pinned a fsc556 instead
-
Post PICs of your SPR style rifles
What's the specs on the nightforce and mount?
-
SAF v NJ (MULLER et al v. MAENZA et al)
How so? Was he the guy that wrote the majority opinion on peruta?