Everything posted by HODGIE
-
anyone need PSL mags
I was actually looking at the ones in Harbor freight the other day. I think it was like $29.99 or something like that, Looks like I will add it to the list right behind the sand blasting cabinet.
-
anyone need PSL mags
Off topic but how does the ultra sonic work for cleaning gun parts? I was looking at a rather inexpensive one the other day at Harbor Freight but was not sure how good it would work on grease and cosmo. I have used them before but more towards the medical field.
-
best place/price for new upper
Ordered mine on Tuesday! Well which one did you get? My Armlite comes in today, and I got my lower yesterday.
-
best place/price for new upper
Here is some good info for barrel twist and ammo loads I use a 1/9 twist but shoot surplus from 55gr to 62ge which is the most common I see sold online. The rate of twist for any given barrel is specific to the projectile diameter, length and velocity. For a 55gr 5.56 NATO round (M193), the proper twist is somewhere around 1/10 to 1/12. The original M16A1 came in a 1/12 twist. However, for the heavier 62gr M855 round, 1/12 does not work. The M16A2 went from 1/12 to 1/7 twist, allowing for this round. Truth be told, the 62gr penetrator (SS109) is actually the length of a 69gr bullet, but weighs less because it has a steel core instead of a lead core. This round will tumble wildly in a 1/12 twist barrel. Testing showed this fast twist rate will show premature throat erosion, so commercial barrel makers decided to make their barrels 1/9 twist since they did not need to adhere to the strict military requirement of 1/7. This worked, and the throat erosion seemed to be mitigated. However, with the newest advances in bullet design pushing the envelope to 75gr and 77gr projectiles, 1/9 is not quite getting the job done reliably. Due to tolerances for rifling a barrel, some barrels marked 1/9 can shoot the heavies with no ill effects, but others marked 1/9 throw them down range tumbling wildly. This is not good. A tumbling bullet is not a consistent bullet, and consistency is what produces both accuracy and controlled expansion. So if you want to load your rifle with the most advanced anti-personnel loadings you can, you will want a 1/7 marked barrel. If your duty load is only 55gr or 62gr at most, then 1/9 is probably alright. 1/12 is unsat. You will be stuck with 52-55gr. While this is not an ammo post, but a rifle post, I will keep it short. A good rule of thumb for the AR-15 is to get the heaviest bullet it will reliably stabilize, as it will penetrate deep enough to reliably hit vital organs, which is your actual target in a gunfight. Ballistic tips do NOT reliably penetrate deep enough to hit these targets when conditions are "imperfect." Stick with BTHP (OTM) ammo, and get the heavies. Our duty load is the Winchester Ranger 69gr BTHP (which works well in 1/9 twist barrels), but my personal choice is 75gr OTM (which I carry in my 1/7 twist LWRC and CMMG.)
-
New toy in the mail!
The mini maglite LED's are amazingly bright for their size, the damn thing lights up my entire 1st floor with no issues at all.
-
Where in NJ is a good place to buy a .223/5.56 AR15?
What's it pretending to be? Your very witty. :roll: Fixed it for ya, at work type fast no proof reading my bad.
-
Where in NJ is a good place to buy a .223/5.56 AR15?
Yeah you would be wrong with that assumption. Yes a custom built rifle from the Big Boy's will be better then the average build but with some know how and research into the part's you choose you can blow away any plain Jane AR-15 sitting on the walls of your local shop. Building does not often save you a ton of cash what it does it get you a better custom rifle that would cost more then buying a base and then adding what you want.
-
R.I.P. to the greates Captain of all time!
I like Capt Morgan better, but Lou was alright too.
-
Looks like things are geting back to normal
If you pick it ip from Ammo man then you will also have to pay 7% NJST so it's never really worth it from him between gas and time.
- AR stock choices for NJ
-
AR stock choices for NJ
The same reason people buy quad rails and put lazers, lights and other BS all over their weapons for looks and another is for comfort the post ban solid stocks can be uncomfortable for some depending on your size. I am 6' 3" log reach so measuring and pinning my own makes for a way better fit.
-
Looks like things are geting back to normal
From what I have read it's made by the same company as wolf they are all pretty much the same. I will probably pick up a case to test it out, I don't really need any but what the hell.
-
Looks like things are geting back to normal
Well after the self induced panic buying price gaouging and ammo shortage looks like things are getting somewhat back to normal, well not really in NJ but every where else. 1000 rounds of 7.62x39/219.00 shipped to my door. http://www.aimsurplus.com/acatalog/Tula ... n_FMJ.html
-
AR stock choices for NJ
I am perfectly confident in saying drilling a hole using a roll pin and filling it in with Black epoxy is just fine. I know at least 2 01ffl gunsmiths that have done it this way for customers. Yes it can be removed but it is considered permanent since the stock is fixed. I can tell you how to make an AK into FA in about 30 minutes but they are still legal in their correct configuration. Just do not alter the completed work and you are fine. Forgot to mention I have meet one of the local State Police 01 inspectors at more then one occasion at Shore shot I have bounced many questions of his head and he should know the answers. Last time I ran into him he was buying a lower receiver and having the stock measured to be pinned. Not sure why since he is LE but I guess he follows the rules for his personal arsenal.
-
AR stock choices for NJ
It is not illegal for you to buy or posses a collapsible stock only to use it on a "ASSAULT" type weapon. I just ordered one yesterday as I am building an AR, Before completed assembly it will have to be pinned.
-
best place/price for new upper
I also don't see anything that looks NJ compliant. You can have the upper shipped to yourself in any configuration, just have to remove the bayonet lug and the flash suppressor and replace with a compensator, much easier VS buying a post ban upper pre-made and cheaper to. Easiest way to get around it is order one with a weaver gas block and ditch the A2 FS and just run flip up back up sights. Noveske is top of the line stuff prices are usually very high, I agree not worth buying non mil-spec uppers and receivers, mil-spec parts are to abundant and cheap to pass them up. However all the receivers on that site are Milspec the barrel twist really is not going to effect the integrity of the receiver or the upper. http://www.bravocompanyusa.com/AR-15-16 ... -s/132.htm All their 16" complete uppers are with a 1/7 twist.
-
AR stock choices for NJ
That's one way, cut the pin a bit smaller then the length of the hole then fill it in with black epoxy on both sides. It can also be reversed with some minor drilling if you ever get the hell out of NJ.
-
Heres the 2-10/22 crank fire
Can I be your new best friend. Never a big fan of the 10/22 but that has now changed.
-
Police: Man tried to sell gun to bank patrons (Jackson Twp)
yeah meth or crack. This guy was probably looking to unload it to get his next fix.
-
Where in NJ is a good place to buy a .223/5.56 AR15?
Man you really do not know what the hell you want huh.... From .45 to AR, to a Storm, then to a Glock, I would sit back and take a breather and buy something that you will use and want.
-
Where in NJ is a good place to buy a .223/5.56 AR15?
What if these liberal nut cakes decide to make AR's illegal...then what? Nothing really, it already happened under Clinton and the manufactures got around it with little trouble just altering and renaming things. We just went though a self induced shortage of ammo and rifles with over inflated prices for nothing. They are not going anywhere, NJ is a post ban state anyway so what's to worry about, that is the worst they did on the last ban and it really didn't effect us in any way our gun law's always sucked. As far as brand's there are a million out there, I personally feel Bushmaster & Smith and wesson are over priced, they are excellent rifles but so are STAG, Rock River, DMPS, CNNG and many others at a much lower cost, they are all milspec and been making parts for larger companies for years.
-
best place/price for new upper
You can also check out aimsurplus and Stag, they have nice uppers in stock and a good assortment.
-
best place/price for new upper
Armlight complete upper: $507.59 shipped. http://dsgarms.com/index.cfm/product/63 ... ceiver.cfm I just bought this yesterday, Armlites are shooters. they shipped the same day, Del-Ton has good prices and post ban config's but they have a 12 to 14 week delay on all completed uppers and rifles. DPMS has some really nice build options but they get into the high range. I have everything I need except for flip up back up sites and spend a bit over 800.00 with shipping and transfers on the lower.
-
Where in NJ is a good place to buy a .223/5.56 AR15?
Better off reading on some AR forums and building your own. NJ AR prices are out of control in my opinion for low line post ban AR's. You can build one to your specs for hundreds cheaper and better then most ones you will find in local shops.
-
Charter Arms anyone?
I hope it does work out, please keep us posted.