Everything posted by njJoniGuy
-
Daily humor thread
- Need a little help on what to do
And just to remind Mrs. Peel the quickest way to a man's heart... Straight through his chest wall with a sharp steak knife!- Daily humor thread
- New Gun Control Law Would Require Gun Owners in NY to get Mental Health Evaluations
Politicians everywhere have their fingers on the "ON" button of the Tree of Liberty's sprinkler system, and many don't even give a crap.- Good work by Howell PD responding to "brandishing" 911 call
Burn that lying nervous nancy for false reporting! Make an example of them!!- Bill to ban Assault Weapons in Virginia advances in House
I think both Blackface and Gopher would relish the idea of dispensing death rather than liberty.- NRA Board Election
Done!- Airsoft legalities
From the Wiki article on "Airsoft Pellets" "6 mm airsoft pellets[edit] 6 mm is the industrial standard size used in almost all spring, electric and gas airsoft guns. A wide variety of pellet masses are also available for different usages. 0.11 g — Manufactured by HFC, same use as .12 gram. Extremely Uncommon. 0.12 g — Extremely common, standard weight for all low-grade AEG's and spring guns. Not to be used in any small arms beyond low-cost, low quality replicas firing under 250 fps. These pellets are notorious for breaking inside high-powered guns because they are not hollow inside. The low weight of this pellet also causes it to be extremely inaccurate because they are easily affected by the slightest of breezes.[7] 0.135 g — Same uses as 0.12 g. Extremely Uncommon. MFI standard. Not to be used in most guns. 0.15 g — Same uses as 0.12 g. Uncommon. Made only by Air Venturi and Black Ops USA. 0.16 g — Essentially the same as the 0.15 g pellets. Made only by Air Venturi. 0.20 g — Second-most common weight. Standard for all chronograph tests in regions, where gun power output is measured in feet per second (FPS). AEGs are able to use these, however, most players will use heavier masses due to the increased accuracy and range. Biodegradable versions made by Green Devil or G&G being one of the most popular makes in the Scandinavian countries and many other parts of Europe & UK. 0.21 g — Homemade by covering .20 g with pencil lead. Great for "paintball" but leaves residue in barrel. 0.22 g — Available from Pyramyd Air. [8] 0.23 g — Heavier pellets for AEGs. Blends speed of 0.20 g with range and accuracy of 0.25 g. Made popular by Tsunami Airsoft. Used less now in favor of .20 g & .25 g 0.24 g — Only known manufacturers are Airstrike (a subsidiary of Daisy) and Crosman 0.25 g — Third-most common weight, especially popular for the higher-powered AEGs used in America. This is the heaviest mass for lower-powered AEGs, blowback and spring guns. Tokyo Marui standard AEGs, gas and spring guns are set at the factory for 0.25 gram pellets, and they usually include a package of 200 of these with the gun. These are available in bio- and non-biodegradable versions from many sellers including Valken, EliteForce, 6mmProShop and Matrix. Biodegradable versions made by Green Devil or G&G being one of the most popular makes in the Scandinavian countries and many other parts of Europe & UK. 0.26 g — Made by TSD in biodegradable form. 0.27 g — Made by Bioval BBBMAX. They are (ostensibly) considered to be of the same grade, if not higher than the Maruzen SGM, while being significantly less expensive. 0.28 g — Most used weight in Northern Europe. Suitable for modern standard AEGs. Typically cheaper than 0.30 g but yields similar performance. Biodegradable versions are made by most manufacturers. 0.29 g — Maruzen Super Grandmaster pellets, designed for their Air Precision Shooting series of airsoft guns. O 0.30 g — Standard mass for most sniper rifles. Also recommended weight for tuned AEGs. Have become more common in recent times with some of the top brands like Bioval and Bioshot, Biodegradable versions made by various manufacturers including G&G and Tokyo Marui. 0.32 g — Also standard for sniper rifles. Offers excellent balance of velocity and stability for most spring and gas sniper rifles. A well-known brand is Goldenball. 0.36 g — Heavier pellets for sniper rifles. Slower, but have high stability. Produced by Madbull Airsoft, among others. BB Bastard manufactures a ceramic pellet in this mass class. 0.40 g — Heavy pellets for airsoft sniper rifles. Mad Bull is a known producer. Even slower than 0.36 g but even more stable and maintains its velocity better. 0.43 g — For the highest level of upgrades in spring and gas sniper rifles. Usually graphite-coated. 0.66 g — For extreme long-range shooting, not used against human targets. This is a CNC-machined ceramic pellet made by BB Bastard. 0.90 g — Nickel-plated steel BBs sold by UK's Abacus Claysports. Air gun grade, not used against human targets." Given the higher mass pellets available for airsoft "guns" it would seem to me that it is only by the discretion of prosecutors that airsoft is NOT considered a "firearm" as defined in 2C:39-1, as quoted in an earlier post by me in this thread. As with "real" firearms, one should proceed with all caution in the use of airsoft, as one may find oneself in a world of legal trouble under the PRNJ's firearms laws. IANAL, YMMV.- Airsoft legalities
Not being a paintball user, I did a search online and found a dimension listed on Wiki (yeah, yeah, I know!): "Paintballs come in a variety of sizes, including of 13mm (0.50 in) and 17mm (0.68in)" That would put them outside the realm of the "smaller than three-eighths of an inch in diameter" definition for firearm projectiles I quoted in the 2C:39-1 statute in a previous post. Maybe that's why Trenton included that dimension in the statute, specifically to exclude paintball from the definition of a firearm. IDK for sure, but it seems logical.- Airsoft legalities
Enacted within the last couple of weeks So recently that the Chapter Law hasn't been published yet.- Airsoft legalities
You're right. I forgot about that new POS law. Here it is from the Bill section of the NJ Leg site. The Chapter law has not been published yet. https://www.njleg.state.nj.us/2018/Bills/A4500/4260_I1.HTM An Act concerning the sale of certain imitation firearms and supplementing Title 56 of the Revised Statutes. Be It Enacted by the Senate and General Assembly of the State of New Jersey: 1. a. As used in this section: “Toy gun” means a facsimile or reproduction of a firearm that is marketed as a product intended for children or is substantially similar in appearance, size, and shape to a genuine firearm. b. A person shall not sell, transfer, or assign a toy gun or imitation firearm as defined in subsection v. of N.J.S.2C:39-1 unless it is: (1) a color other than black, blue, silver, or aluminum; (2) marked with a non-removable orange stripe that is at least one inch in width and runs the entire length of the barrel on each side of the barrel; and (3) equipped with a barrel at least one inch in diameter that is closed at a distance of at least one-half inch from the front end of the barrel with the same material from which the toy gun or imitation firearm is made; or (4) is regulated under and conforms with the provisions of 15 CFR 272.1 et seq. c. The provisions of this section shall not apply to the sale of theatrical firearms for which a permit is issued by the Superintendent of the New Jersey State Police. The provisions of paragraph (3) of subsection b. of this section shall not apply to water guns. d. A person who violates this act shall be subject to a penalty of not more than $500 for the first offense and not more than $1,000 for each subsequent offense, to be collected in a civil action by a summary proceeding under the “Penalty Enforcement Law of 1999,” P.L.1999, c.274 (C.2A:58-10 et seq.). 2. The Director of the Division of Consumer Affairs in the Department of Law and Public Safety shall adopt rules and regulations pursuant to the “Administrative Procedure Act,” P.L.1968, c.410 (C.52:14B-1 et seq.) to effectuate the provisions of this act. 3. This act shall take effect immediately. STATEMENT This bill prohibits the sale of toy guns and imitation firearms that appear to be genuine firearms. An “imitation firearm” is defined in New Jersey’s firearm statutes as an object or device that is reasonably capable of being mistaken for a firearm. The bill defines “toy gun” as a facsimile or reproduction of a firearm that is marketed as a product intended for children or is substantially similar in appearance, size, and shape to a genuine firearm. The bill prohibits the sale of a toy gun or imitation firearm unless it meets certain specifications. Under the bill, a toy gun or imitation firearm is required to: 1) be a color other than black, blue, silver, or aluminum; 2) be marked with a non-removable orange stripe that is at least one inch in width and runs the entire length of each side of the gun’s barrel; and 3) have a barrel that is at least one inch in diameter and closed at a distance of at least one-half inch from the barrel’s front end with the same material of which the toy gun or imitation firearm is made. The bill provides that a toy gun or imitation firearm that does not meet these standards is required to meet the federal standards for the appearance and configuration of toy guns and imitation firearms established pursuant to 15 CFR 272.1 et seq. Under federal law, it is unlawful to manufacture, enter into commerce, ship, transport, or receive a toy gun or imitation firearm unless it has one of the following characteristics: a) a blaze orange or orange color permanently affixed to the muzzle end of the barrel as an integral part of the entire device and recessed no more than six millimeters from the muzzle end of the barrel; b) a blaze orange or orange color permanently affixed to the exterior surface of the barrel, covering the circumference of the barrel from the muzzle end for a depth of at least six millimeters; c) is entirely constructed of transparent or translucent materials which permits unmistakable observation of the device’s complete contents; or d) the entire exterior surface of the device is colored in white, bright red, bright orange, bright yellow, bright green, bright blue, bright pink, or bright purple, either singly or as the predominant color in combination with other colors in any pattern. The bill exempts theatrical firearms which are used in movie and film productions. The bill establishes penalties for violations at a maximum of $500 for the first offense and $1,000 for each subsequent offense.- Airsoft legalities
Welcome to the "gray area" of 2C:39 and 2C:58 Airsoft is not specifically called out in the statutes as illegal, but the bill(s) to specifically call them "not a firearm" have never even had a hearing in a Law & Public Safety Committee. If someone were to be seriously injured by an airsoft discharge, a prosecutor could pursue firearm charges against the shooter under the current definition of a "firearm" under 2C:39-1f as follows: f. "Firearm" means any handgun, rifle, shotgun, machine gun, automatic or semi-automatic rifle, or any gun, device or instrument in the nature of a weapon from which may be fired or ejected any solid projectable ball, slug, pellet, missile or bullet, or any gas, vapor or other noxious thing, by means of a cartridge or shell or by the action of an explosive or the igniting of flammable or explosive substances. It shall also include, without limitation, any firearm which is in the nature of an air gun, spring gun or pistol or other weapon of a similar nature in which the propelling force is a spring, elastic band, carbon dioxide, compressed or other gas or vapor, air or compressed air, or is ignited by compressed air, and ejecting a bullet or missile smaller than three-eighths of an inch in diameter, with sufficient force to injure a person. A 6mm airsoft ball is 0.236" in diameter, which is less than the statutory 3/8", making Airsoft a firearm if a prosecutor chose to pursue the matter. IMHO he'd be a fool to, as that would open a whole new can of worms here in the Glorious Peoples Republik of New Jerseystan. IANAL but I did spend the night with one a long time ago at a Holiday Inn Express. YMMV.- Police trade in handguns
Most police trade-in handguns have more holster-wear than usage-wear. And with a department armorer, proper functionality is rarely an issue.- Fatal accident In Toms River
Just goes to show that you've got to be pretty high to get a Porsche to fly! Play stupid games, win really stupid prizes (like an eternal dirt nap)- ANTIFA and NYC Finest...
Soon enough, I believe Esp with the goings-on in DC. Time for Snake Plissken to make a reappearance- Can't handle gun IN A GUN SHOP without showing FID card??
You are correct @Sniper . No FPID card is needed to purchase a handgun. Your SBI number is clearly shown on the PPP. I meant to quote the post above yours, from @Indianajonze who asked "Since when?" about buying handgun ammo.- Nine MInute Video of 43 Full Autos
Now THAT'S a day at the range! Great rate of fire from the Kriss Vector I wonder why he didn't shoulder the BAR? And in the immortal words of Ricky Ricardo: "Lucy - you got some cleanin' to do!"- Can't handle gun IN A GUN SHOP without showing FID card??
January 13, 2008 https://www.njleg.state.nj.us/2006/Bills/PL07/318_.HTM- New 2020 Bills- not good
Both S747 and S98 are essentially the same POS bill. Both are resubissions of bills (747=last term's S2229/A3689; 98=last term's S548/A3697) that went nowhere (thank G-d) S98 is the work of Nia Gill, an female attorney of color who has made a career of sitting in the NJ legislature (1994-2001 in the Assembly and 2002 till now in Senate Dist. 34) where she is well past her expiration date imho. S747 is the work of Vin Gopal, a non-attorney with only a BA from Penn State (along with 100,000,000 other people) who has been in the Senate (Dist. 11) only since 2018. Looking at the list of bills each of them has sponsored is making me sick, so I think I'll leave it here. Pardon me while I vomit at both their legislative records.- Va. .......what a mess.
Did someone mention "heads on pikes"?- Kobe Bryant dead...
Check for hotel maids who recently purchased stinger shoulder fired missiles.- New 2020 Bills- not good
The Senate Law and Public Safety (LPS) Committee has a meeting scheduled for later today (Thursday 1/23) Currently, nothing is listed on the agenda The Assembly LPS Committee has a meeting scheduled for Monday 1/27 There are 4 bills on the agenda right now, none 2A related These agendas of these committees are ultimately controlled by the Speaker of the Assembly and the President of the Senate This is where the bad sh!t will start at the behest of Gov Gopher and the Swarmi- So Much For The Rally, VA Senate Approves Red Flag Law
The pot continues to heat up in VA But the frogs know what is happening I expect bloodshed is coming- Daily humor thread
- Trump Rally in Wildwood
He was the catcher on his HS baseball team because he was as wide as the backstop, so wild pitches couldn't get past him! - Need a little help on what to do