Everything posted by njJoniGuy
-
.223 Reloading.
I let my Giraud trimmer decide all the time. If my newly sized and delubed brass is long enough to make it to the cutting surface, it gets trimmed, chamfered and deburred. Otherwise it never touches the cutting surface. Next step, prime with the RCBS handheld and stand each piece up to be certain of no high primers (AR slam fires are not a good thing!)
-
Are Rifles in Parades exempt?
Reminds me of the scene in Animal House at the homecoming parade, with Flounder taunting Niedermeyer, who pulls a live round out of his pocket and loads it.
-
Great 223 deal
I'm not on Facebook, so I cannot see their 'deal' But you do understand, don't you, that 'Remington .223' is NOT a specific brand of ammo but is in fact a CALIBER DESIGNATION
-
Great 223 deal
Is it XM855PD? They've been known for selling repackaged bulk 'floor sweepings' in the past.
-
Any manuals have data for 95 gr. JHP .380 ACP?
The datasheet that is included in the Lee 380acp carbide die set shows for 95gr jacketed: 2.7-3.3 max gr Titegroup (my pistol powder of choice) 953 fps (at max) min .0970 OAL The only data for IMR 700-X on the sheet is for 100gr jacketed: 2.7-2.7 max gr 840 fps 0.980 OAL I plink (Ruger LCP) with Rogers Better Bullets 95 gr LRN over 2.9 gr Titegroup and Lee Factory Crimped. YMMV
-
Rifle legality flowchart! Did I get it right?
Currently, yes your flow chart works
-
What Will SCOTUS Do
Delaware County PA And if you're up for JungleLife, the City of Chester is just the ticket.
-
How many FFLs are in NJ?
Ever had an unannounced visit from the NJSP because of this?
-
Freedom Munitions - Reman .223 55gr
Looks like the brass may not have been chamfered during the remanufacturing process. Another reason to DIY (and not skip steps along the way) The body parts you save (esp those that don't grow back) may be your own.
-
Talk to me about 7mm rem mag
Last year, during a 600yd MidRange prone match at Cumberland Riflemen, a shooter on a 7mm Rem Mag was squadded on the firing line just to the right of me. A very disconcerting match I'd like NOT to repeat. Even without a muzzle brake, the noise and concussion were brutal. I began to time my shots BETWEEN his to avoid the induced flinch.
-
8mm mauser brass from .30-06
http://www.midwayusa.com/product/770975/rcbs-trim-and-form-die-8x57mm-mauser-8mm-mauser-from-30-06-springfield Haven't tried it (don't have either caliber) but Midway generally is a good source
-
fid to look at gun?
I witnessed the same behavior at Dick's in Deptford last week when a guy wanted to look at a pellet rifle. Boy, was he surprised!
-
So, has ammo ever been available? (In the past decade)
And bricks of .22LR for $5 in the '70s and $10 in the 90's pretty much everywhere!
-
Justified season premier Tonight 10pm
Good on Wendy for putting 2 shots into Darryl Jr, especially the first one!
-
Did dicks lose their ffl?
I was told today that the problem in Christiana is a Delaware State License renewal issue.
-
Is this muzzle device legal??
The Auto Ordnance ML Carbine WAS Jersey-legal ... for about 3 days! Then everyone and their brother started calling W.Trenton and asking about its status. And suddenly, as quickly as it 'became' legal, it was ILLEGAL again. In the immortal words of Dianne Fine-Swine: "Ladies and Gentlemen of America, TURN THEM ALL IN!!" Fat friggin chance you old hag!
-
Kudos to Leatherman
That was the last I heard, and I've not found anything to refute it. For my money, F-leatherman.
-
Did dicks lose their ffl?
You're right My mistake I confused the Dicks with the new Cabelas mea culpa
-
Did dicks lose their ffl?
Christiana DE is their NEW location. Each location has a separate FFL. Obviously, the new store hasn't been fully approved and papered yet. Be patient. I'm sure it will happen soon.
-
Accurate AR for Newbie
An outstanding choice. It's the same one I use (except mine is the left-handed version) to shoot Across The Course (200-300-600yd) and MidRange Prone (600yd) matches at Cumberland. And I made Master (94-97%) with mine the end of last season. Add a good match trigger (like a Geissele HiSpeed) and front and rear match sights and you'll find that the shooter is the weak link in that chain, not the gun. On the other hand, there are shooters using Service Rifles (20" bbl A2's) and kicking butt out there at 600 slow prone. But they are the exception rather than the rule. And all this in .223Rem! Come on down to Cumberland this weekend. Opening match for the new season for both High Power Disciplines. PM me for more details.
-
Removing Bayonet Lug
Then you'd want 12 of us on your jury. Otherwise, don't forget to grab the jar of Vaseline on your way to court.
-
Removing Bayonet Lug
Since the statute does not define "bayonet lug" and one without ears cannot lock a bayonet onto the rifle, it can still be secured to the ear-less lug with a piece of duct tape. Do yourself a favor and take the entire lug off, just like the compliant models come from the factory.
-
Sports Authority Coupon 25% off single item
Says right on the coupon (which expires in 4 minutes) that it excludes firearms and ammunition, among other things.
-
Powder for .45, 230gr JHP
To answer the OP's original question: In my .45acp 230gr FMJ (that I generally only shoot in my XDM45 and Springfield GI-replica WWII 1911) I use 4.6gr Hodgdon Titegroup At close to $.20 per bullet, I more often shoot Better Bullets 200gr (45LC) LRNFP over 4.5gr Titegroup in the rest of my .45acp pistols, and 5.2gr Titegroup with the same bullet in my Beretta Storm CX4 and HiPoint carbines. That's my story and I'm stickin' to it! YMMV
-
Look what BS they're teaching our kids now
You and I are the same age. You pretty much described my 2 daughters (age 29 and 33) in talking about yours. The question I've been pondering is: Will we go out with a BANG or a whimper? I expect to go out either with a cardiac event (had a triple CABG at 46) or by someone's lucky shot returning fire. I ask again, as I do in my sigline: IS THE LINE READY ON THE RIGHT?