Everything posted by Pizza Bob
-
First Match & Public Thanks
Glad you had a good time and looking forward to seeing you next month. Adios, Pizza Bob
-
M1 Garand experts - please help
You asked for an expert, here you go... http://www.radomski.us/njhp/major.htm Adios, Pizza Bob
-
USPSA Class w/ DVC Performance
Or losing 40 years....but that ain't gonna happen either.
-
USPSA Class w/ DVC Performance
Chris, Really glad to hear how well it worked out for you. I know that you spoke of Tenafly, but you may want to consider Shongum, near Hackettstown, also. It happens on the first Saturday of the month. I shot it this past weekend (not well - maybe I should employ Aaron?). Ronny was there also. Hope our paths cross in the future. Adios, Pizza Bob
-
ICORE Match Saturday 06/08. Now 07/13
Yes it is hanging in there. There will be a match on 07/13 starting at noon. In order to increase the number of participants, there will be an unofficial division for 1911's - any caliber, but restricted to eight rounds total, (7+1 to start) and mags loaded with 8 rounds on your belt. Here is the ICORE web page for LPRGC https://lprgc.org/?page_id=3417 July's match will consist of the ICORE Postal match, found here... http://icore.org/postal/ICORE_IPM_2019.pdf Plus a "fun" stage. To give you an idea, last month's fun stage consisted of three paper targets, interspersed with three pepper poppers, a plate rack bracketed by two more paper targets and then two, yes two, Texas stars. A nice late start, so you can sleep in. With the addition of 1911's it will give you an opportunity to try it out before investing in a revolver - everyone needs at least one revolver. LPRGC is within a stone's throw from where the Oaks Gun Show is held. Hope to see you there. Adios. Pizza Bob
-
S&W Model 544 - A Completed Journey
About ten years ago I ran across a rather interesting revolver - a S&W Model 544. I'd never heard of it before, but I bought it because: 1) It was an N-frame; 2) It had a 5" barrel (a favorite of mine); 3) It was chambered in a caliber that started with a "4"; and finally 5) I couldn't pass up the price. This was the gun only, but that was fine by me as I bought it as a shooter. The 544 is the Texas Wagon Train and Sesquicentennial (1836 to 1986) Commemorative. There were approximately 4800 of them manufactured. This gun was significant not just because of the events commemorated, or the not common barrel length, but also because of the caliber: .44 Winchester Center Fire (WCF), better known by its black powder appellation the .44-40 (.44 being the nominal bullet diameter - actual .427" - and the 40 standing for the standard loading of 40 grains of black powder. This is the first, and AFAIK only, post-war gun made by S&W in that caliber. As I did my research, I found out that these came with a nice basswood case with a detailed inscription on the lid. Again - of little matter to me as I intended to shoot it and paid a "shooter" price for the gun. I think it made it to the range once, and then back into the safe. In my new incarnation as a S&W collector, all of a sudden that case, or more to the point the lack of the case, became important to me. Most collectors will tell you that generally commemorative guns usually are not more valuable than the non-commemorative counterparts - so when I buy a commemorative I look to pick it up for the same money or less, than I would if it weren't a commemorative. There is no non-commemorative counterpart to the 544 and it generally brings a little more than a regular N-frame, in any standard caliber, when it is complete with the presentation case. So off I go in search of the correct presentation case. I found one on eBay. It had some scuff marks and scratches, but beggars can't be choosers. The problem was the seller wanted stupid money for it, but there was a "make an offer" option - which I did, based on what the standard S&W mahogany presentation cases were selling for. The offer was declined. I waited a month or so (this had already been listed for about 4 months - you'd think the seller would have had a clue) and went back and sweetened the deal a little. This offer was also declined. I thought I'd let them stew for a while. Last week I checked to see if it was still for sale - it was, and at the same stupid money. But lo and behold, there was another one listed, and this one was in pristine condition. It was also overpriced, but not to the degree the first one was, and it, too, had a "make an offer" option. So I did - a little higher than what I had offered on the other case, but this one was in much better condition. My offer was declined. This time I contacted the seller and asked them how big they thought their market was for a case that was made for a very specific gun and which originally came with that gun. Also pointed out what you could buy a regular S&W presentation case for, which was not restricted to a particular gun. Within two minutes of my sending the message, he accepted my offer. LOL. Without further delay, here is the case... and here it is with the 544 ensconced... Have a happy fourth of July. Adios, Pizza Bob ADDENDUM: The above was the resolution of the "gun with no case" dilemma, but I have another, not so easy dilemma - that is the "case without a gun". I am looking for a 1981 S&W 629-1 Iditarod Commemorative revolver - just the gun. If you should run across one in your travels, PM me here. Thanks folks. PB
- Daily humor thread
-
Rifle / Handgun Complements
How about some photos of rifles and handguns chambered for the same caliber? I'll start... Marlin 1894 chambered in .44 Mag/.44 Spl While I have any number of .44's to pair with this, I think my S&W Heritage Series 24-5 is most appropriate to go with a lever gun... Next we go modern with a 9 mm Ruger PCC.. While, again, I have more than a few 9 mm's, in keeping with the "modern" theme, here is my only piece of "tactical tupperware", a Steyr M9 A1... And finally, an interesting pairing. A Cooper 57M LVT in .17 HMR (1 of 40 made with a maple stock)... And my latest S&W acquisition, a Model 647, only made for two years... OK, let's see what you have. Adios, Pizza Bob
-
Question for FFL's
I would imagine that most of us know that the most cost effective way to ship a handgun to an FFL in another state for delivery to an individual, is through an FFL in the state of origin. Since FFL's can ship handguns via the USPS and individuals are restricted to using a common carrier like UPS or FedEx - which require next day or second day. My question is that when an FFL accepts a gun for shipment, do they have to enter it in their bound book? Adios, Pizza Bob
-
Fun on the autobahn
Heck, I did that on Rt 31 while messing with a ZL1 Camaro
-
USPSA & IDPA: A Synopsis (Updated 03/29/2015)
Yes Maks has, as have I, and others that have responded to this thread. Is there a question?
-
Best pizza you ever had?
The best pizza in Delaware is Grotto Pizza at the Delaware shore - of course it had its origins in NE PA.
-
Best pizza you ever had?
I don't know - I was never impressed with the pies put out at their Hamilton Ave and subsequently the Sloan Ave locations. OTOH I've had only great experiences at the original 'burg location (now closed) , the Robbinsville and now the Yardley/Lower Makefield stores. I kind of take umbrage at the other side of the family co-opting the "Burg" name with the Levittown store in an effort obfuscate exactly which Delorenzo's pies you'll be getting. Adios, Pizza Bob PS: Thanks for the kind words
-
Best pizza you ever had?
Delorenzo's Tomato Pies in Robbinsville, NJ. How can you not believe someone called... Pizza Bob
-
This week on GunForHireRadio #419 live from the Blade Show in Atlanta. Sivin joins me as cohost so I can retire to Guam, before it tips!
I had a friend who was stationed on Guam, and while he told me it's beautiful, he also said that it stands for: Give Up And Masturbate. He was single at the time.
-
USPSA & IDPA: A Synopsis (Updated 03/29/2015)
Stu is good people and a good shooter.
-
USPSA & IDPA: A Synopsis (Updated 03/29/2015)
Don't be bashful - I've been DFL more than I like to admit, but it's just a game. A bad day shooting is better than a good day doing anything else. Adios, Pizza Bob
-
ICORE Match Saturday 06/08. Now 07/13
CORE stands for International Confederation of Revolver Enthusiasts. Lower Providence Rod & Gun Club (LPRGC) has been trying to get ICORE matches off the ground. The MD has succeeded in convincing the BOD of the club to devote the second Saturday of the month to this endeavor. If they do not get a large enough turn-out for these matches, all his hard work may go for naught. ICORE is kind of a cross between IDPA and USPSA, but is contested with revolvers. Here is a link to the rules that explains the Divisions and equipment needed. http://www.icore.org/ LPRGC is located very near where the Oaks gun show is held. When you get off the ramp, from 422, you turn right instead of left. About a mile or so down the road is the entrance to the club, on the left. Below is the link to register... https://practiscore.com/lprgc-june-icore-match/register Grab that revolver, that has only been gathering dust, and put it to good use. Right now there are only 5 people registered for this match and that includes Sgt Toadette and myself. Adios, Pizza Bob
-
USPSA & IDPA: A Synopsis (Updated 03/29/2015)
For USPSA only three mags will probably not be enough - especially in the NJ gulag. Five would be better. You can get by with three for IDPA - but even there, four would be better. No need for a "concealed" holster. Almost universally, for those divisions that don't allow speed holsters, the go to holster is an OWB Kydex. There are rules on where and how high it is to be positioned on your belt. The most newbie friendly match in the area - IMHO - is IDPA at Somerset, a week from this Sunday. It is a long day, considering it is only 4 stages, but that is due to the constraints of shooting on an indoor range - which means it isn't weather dependent. Thanks for the kind words. Adios, Pizza Bob
-
Smith & Wesson Heritage Series Revolvers
Thank you, and no.
-
Smith & Wesson Heritage Series Revolvers
Just after the turn of the 21st century the S&W Performance Center manufactured a series of revolvers in partnership with some of their distributors and other vendors. These were not replicas or reproductions, but rather a homage to those revolvers of the first half of the 20th century. All but one model were done in classic revolver calibers – those being .38 S&W Special, .44 S&W Special and .45 Colt. The one non-classic, but iconic, caliber was .44 Remington Magnum. Also as a tribute to the Model of 1917, .45 ACP models were included. The Heritage Series were done in limited numbers, with issues running from as low as 102 guns to a maximum of 327. The largest purveyor of these was the distributor Lew Horton. There was also a run of Model 25’s for the distributor Sports South. Contributing vendors were Doug Turnbull Restorations, who did the real color case hardening of the frames on some models, and Altamont, the supplier of the stocks, most of which were, what are called, Legacy Panels – finely checkered minimal stocks with outstanding grain. The majority of these guns were delivered in gold cardboard boxes with blue metal reinforced corners. These were similar to the boxes used during the early 20th century and bore the likenesses of Horace Smith and Daniel B. Wesson on the lid. Some of the early production guns were delivered in Performance Center aluminum cases rather than the gold boxes. There were three finishes used on the Heritage Series guns. Not all finishes were available on all models. The finishes used were, of course, a deep lustrous blue and a shiny bright nickel. Those along with the previously mentioned Turnbull color case hardened frame that was used in conjunction with a blued cylinder and barrel. One model was a tribute to Ed McGivern. The Model 15-9 (available in all three finishes) has a plate affixed to the gun’s side plate, commemorating his setting of a speed record, which has yet to be broken. That record is for five shots on a playing card at fifteen feet, in two-fifths of a second. He backed it up with another five shot run of nine-twentieths of a second. This was set in 1934 when McGivern was 57 years old. These revolvers first captured my attention when I was just perusing various sites looking for revolvers chambered in .44 S&W Special – a favorite caliber of mine. I found the Lew Horton Model 24-5, with the color case hardened frame, shown here. It was from early in the production run (#25 of 327) and as such came in the PC aluminum case. This piqued my interest in these guns, so I started looking for others. I soon found one of the blued Sports South Model 25-10’s in .45 Colt. Unfortunately it did not have its original case, but it was an especially low number gun, being #10 of 150. It has been hard to determine what stocks this gun came with originally. It came to me wearing faux ivory Magna’s with medallions and a Tyler T-grip. In the package was also a set of the Altamont Legacy Panels, which I suspect were original to the gun. However, I have seen pictured, and referenced, Altamont Target stocks – replicas of S&W target stocks used from the 50’s to the 80’s and duplicated by Altamont for S&W on the Classic line of revolvers. Since I already have revolvers with the Legacy panels, and not in love with Altamont’s Target stocks, I went another direction and installed the set of Altamont Roper tribute grips, in Pau Ferro, that you see pictured. These are in keeping with the nature and time of the gun. Both of the above revolvers were built on my favorite frame – the N-frame. But there was something missing in my meager collection. What better to fill that hole than the model that was a tribute to the author of Fast and Fancy Revolver Shooting, Ed McGivern, the K-frame Model 15-9. I was fortunate to find one in pristine condition, in the nickel finish, complete with gold box and all documents. This is also equipped with the Legacy Panels and was #81 of the 139 produced. I didn’t realize it until I was in pursuit of the 15-9, that is, there was no set design from the outset, but what I ended up with is the trifecta of revolvers. The three iconic revolver calibers (.38 / .44 / .45) in Heritage Series, target version (adjustable rear sights) guns, in each of the three finishes available (color case hardened / blued / nickel). I think I’m done for a while. Just as a side note, the 24-5 came from Missouri; the 25-10 from Colorado; and the 15-9 from Massachusetts. ADDENDUM: Well, that didn't last long , what is glaringly absent from the above is a rimfire revolver. Smith did make a Heritage Series Model 17, but a unique opportunity presented itself this past weekend - a gun auction at a local (to me) auction house. Among the offerings was a post-war (1950) K-22 revolver in excellent condition. Not quite of the period of the Heritage series, but close and genuine... Now, maybe I'm done - but doubtful. Adios, Pizza Bob
-
Picked up this Masterpiece today
You did real good!
-
Top optics ready guns, what do you have in your toy box?
Truer words were never spoken. If you are just going to use this as a range gun - stand in one place and shoot at stationary targets, fine - just about any combo will do. But, if you intend to try some gun games, or actually carry this as a defensive hand gun, there is a huge learning curve and you have to devote yourself to lots of practice to get even semi-proficient. I shoot IDPA and USPSA and I am amazed at how well the people shooting carry optics do - but in examining who they are, you'll find that most are top-tier shooters and do put in a ton of practice. I am at a point where I have become a collector of arms - not necessarily a user of all I purchase. I bought this (P226 Elite Rx SAO) because it was at a good priced and I wanted to try an optic. I have two revolvers with red dots, but they have only been used for static shooting. I was in for a rude awakening when I attempted to use this at an IDPA match - went right back to my revolvers (but not looking to get rid of it). So, if you are going to get a handgun with an optic, and plan to use it for anything other than static range use, be ready to dedicate yourself to a lot of practice. Adios, Pizza Bob
-
I think you can technically have a collapsible stock in NJ..
OK, who wants to be the test case??? Raise your hand............just as I thought.
-
Newbie here, need help!
Sorry, no. You should have told me on Sunday. You really expect this old codger to retain something you told me 4 weeks ago????