Everything posted by Pizza Bob
-
All Play and No Work Makes Bob Fall Behind
As has been pointed out, Torx head fasteners have been used in American cars for quite a long time. I was in the automotive industry for 35 years before I retired and encountered them a long time ago. This particular one was just hard to see clearly (couldn't be that my eyes are getting older....nah.) I probably already had a T30 bit lying around somewhere - but what the heck, now I have a full set, including security bits. While most people know about Torx, who knows what used Whitworth fasteners (no fair Googling)??? Or how about Huck bolts??? Adios, Pizza Bob
-
All Play and No Work Makes Bob Fall Behind
Despite what many of you may think, I actually own and shoot long guns on occasion. I used today to catch up on some rifle tasks that I had been putting off for a while. The first, and easiest, was simply installing a second charge handle (left side) on my Ruger PCC. A little blue Loc-Tite and an Allen wrench and we're all set. The second task was no more difficult, but more involved. Quite a while back, I came across and interesting CZ rifle with their mini-Mauser action. It was chambered in .223 and the twist rate was correct for the heavier bullets normally used in an AR. This was a 527 variation called the 527 Royale. Interesting looking and relatively rare. I don't think they ever cataloged it in the US and sources vary as to how many were imported. It came with the CZ rings that mate with their dovetailed receiver. One screw in one of the rings was stripped. I bought a set Burris rings, but had yet to remove the scope and remount it. So that got done this morning too. The last project wasn't difficult but it was frustrating. I have a Howa 1500 Axiom. This gun shoots terrific, but had a horrendous trigger (this was from before Howa's HACK trigger). I shot sub-MOA groups with the old trigger, so I figured I could probably do better with a better trigger. I ordered a Timney 1.5# trigger. Really simple one-screw installation, after you get the action out of the stock. That required purchasing a long .25" ball-end Allen wrench. Then came the frustrating part (my bad). The action screws appeared to be socket head Allen screws, but I couldn't find an Allen wrench to fit. I ended up going to Harbor Freight and buying a huge set of all kinds of bits (China - cheap). Still couldn't find one - then I looked a little closer at the screws....waaaaiiit a minute - those aren't Allen head, those are Torx. Sure enough a T30 bit had them out in a jiffy. While the action was out of the stock I also converted it from an internal mag with a floor plate, to a detachable box magazine. The kit came with one magazine - I got a ten-rounder - and then I ordered a second five-round magazine. Pretty slick. What I found was that the action screws weren't torqued anywhere near spec - so that got taken care of upon reassembly. That takes care of the long gun tasks. Later this week I have to sight-in my new Ruger GP100 Match Champion so that I can christen it at Saturday's IDPA match at Lower Providence. Adios, Pizza Bob
-
Sig P226 Replacement Mags
Mec Gar all the way. They used to be the OE supplier to Sig. Here is where you'll find them for a good price and get good service... http://gregcotellc.com/cart/sig-sauer-magazines-c-123/sig-sauer-p226-9mm-10-round-blued-finish-mecgar-mgp22610b-p-613.html get shiny ones for a dollar more, if it matters. Adios, Pizza Bob
-
Let's see those wrist clocks
OK, I'll play. I am somewhat of a watch junky, although those for daily wear are generally inexpensive to mid-range... Top row (L to R): Torgeon / Wenger (Swiss Army) / Tag Pro / Bulova Precisionist / Techno Marine Bottom Row (L to R): HOH Bedlam / Seiko / Victorinox (Swiss Army) / Lum Tec I discovered how comfortable silicone watch straps are, so have converted all my daily wear watches to them. They also come in a wide variety of styles and colors. I have a couple old-style (small case) Omegas and a number of Seikos that are all gathering dust on my dresser, but the nine pictured are in the regular daily rotation. Adios, Pizza Bob
- 2019 International Revolver Championship
- 2019 International Revolver Championship
-
S&W brining back 610
In IDPA it is simply the Revolver Division (all revolvers limited to six rounds), but the ESR sub-division, meaning that it has to make major power factor (155 in this case) and can be (really must be) loaded with moon clips. In USPSA it would shoot in Revolver - Major (165 in this case) and be limited to six rounds. ICORE would be Limited Six and make a PF of 120
- S&W brining back 610
-
S&W brining back 610
Ha! Great minds think alike - which is why I pretty much committed revolver heresey by purchasing this... For a couple years I shot a Smith 646 in IDPA (that's a .40 S&W L-frame with a titanium cylinder). Ultimately decided to retire it as it has become pretty valuable. Shot my 625-8 PC instead. When Ruger came out with the 10 mm Match Champion I decided to give it a try. It has the heft of the 625 and the moon clips from my 646 are supposed to work with it (they do fit, but I haven't shot it yet). I am also going to try Federal's new SynTech ammo in .40 S&W with the coated 205 gr bullet. There are some upgrades on my new MC - most obvious is the Hogue Tamer Grip - this is patterned after the grip they make for the X-frame Smith and is the grip I use on my 646, my 625, and my 586 Brazil. Internally I have gone with a 10# main spring and an 8# rebound spring. The charge holes have all been chamfered - I know this is done at the factory - but that is just a start, I've had them opened up slightly more. And last, but far from least, is the replacement of the stock rear sight with a Bowen Rough Country sight. Better sight picture, all steel and very rugged with adjustments that are "locked down". I'll be sighting it in next week or the week after - I have some mods to perform on a long gun (waiting for parts) and only want to make one range trip. Hope to be able to try the MC at Lower Providence IDPA the end of the month. I think Smith was pressured into reintroducing the 610 by Ruger's move to chamber the RH, the BH and the GP100 in that caliber. This is the third time that S&W has "introduced" the 610. Adios, Pizza Bob
-
Sales soar after judge lifts capacity ban
Spending money needlessly in the face of an assured 9th circuit reversal is what is ridiculous. You think that they'll run out if the 9th circuit doesn't reverse it? Adios, Pizza Bob
-
Sales soar after judge lifts capacity ban
What happens when this gets overturned by the 9th Circuit Court of Appeals? We have enough experience her in NJ that they do not necessarily have to grandfather in standard capacity mags. Maybe I'm too conservative (or been around way too long) but I don't think I'd be spending a ton of money on mags based on a lower courts decision. Adios, Pizza Bob
-
S&W brining back 610
Just curious - are you talking about the polymer Bodyguard, or the real thing (49, 38, 638) - if the former, there's his problem right there. Plastic was meant for Tupperware, not guns. Adios, Pizza Bob
-
S&W brining back 610
The accuracy of the two piece barrel is a result of the actual barrel tube being held in tension within the shroud. This is/was more apparent with the Dan Wesson revolvers and the user changeable tube and shroud barrels and the reason why they were the preferred IHMSA revolver. MIM parts need little to no machining and they hold tighter tolerances, thus less tolerance stack and less hand fitting needed. I don't know why, in the mind of a lot of shooters, new = bad/cheap. New technology makes for better guns for less money. Not a fan of the lock, but I've never let it stand in the way of me purchasing a gun I want. If they bug you that much they are easily removed and even the hole can be cosmetically hidden. Welcome to the 21st century. Adios, Pizza Bob
-
First Time Handgun Purchase
We're not alone with this system. In fact PA is also a POC state, which is why there they call it "PICS". There are 13 POC states total. Not advocating or supporting this system, simply pointing out that NJ was not the originator, nor the only state that has to live with it. Adios, Pizza Bob
-
Car Guru's - 2019 Chevy Traverse - Auto Stop/Start
Maybe this will help... http://gmauthority.com/blog/2018/10/lets-talk-about-engine-stop-start-part-2-disabling-the-feature/ Google is our friend. Adios, Pizza Bob
-
Can I have a permit ? if i was a criminal
Call me tin-foil hat paranoid, but we need to stop this right now. Do you now how this looks, or how it will be interpreted by somebody like a member of "Moms Demand Action?" They'll say that we are helping/encouraging convicted felons to obtain guns. If the OP is not smart enough to contact a lawyer (and given the grammar and syntax of the post that may be) then i for one really could forego him joining the firearms community. Adios, Pizza Bob
-
friend lost/misplaced hid FIDC , is it needed to and from a range?
Without his FPID he will be restricted to going or coming directly between the range and home. With it he could ride around with a rifle in his trunk. Adios, Pizza Bob
-
Can I have a permit ? if i was a criminal
No is a qualified answer... N.J. Stat. Ann. § 2C:1-4 - No permit to purchase a handgun or FPIC shall be issued to any person who: Has been “convicted of any crime” (under New Jersey law, a crime is an offense “for which a sentence of imprisonment in excess of 6 months is authorized);” Save your money.
-
Can I have a permit ? if i was a criminal
No
-
$300 FID Card???
He says from his home in Pennsylvania.
-
A Tribute to Leo
I’m sure that most of you have shooting buddies. People in the firearms community with common interests with whom you can freely talk about guns, gear and whatever trips your trigger. Leo was that person for me. I’ve known Leo for 47 years. We met, as one would expect, at a turkey shoot in Harvey’s Lake, PA. He was as enamored with S&W then as I am now. He was my teacher, whom I eventually eclipsed and became his teacher. That was only because Leo was somewhat of a luddite and never explored, or even knew how to explore, the Internet. It was a knowledge base that he denied to himself. That only slowed him down slightly as I helped bird dog for him and arrange for some primo S&W purchases. Always fun spending OPM. When I met Leo, he was a SS Disability Claims Examiner. Was married and owned his own home. Over time he confided in me that the two things that he wanted most in his life were to join the military (he had an appointment to West Point, but couldn’t pass the physical because he was color blind), and to become a nurse. This came about because of a teenage job as an orderly at the local veteran’s hospital. Also, when I met him, he was about as tall as he was wide. He was one of the most single minded of purpose people I’ll ever know. After I moved to NJ (with my future ex-wife) we kept in touch by phone, but hadn’t visited in some time. He started to fulfill his life’s ambitions by getting his Associates Degree in nursing and passing his boards to become an RN. Then one day I got a call from him in which he imparted that he had divorced his wife, sold his house and joined the navy. He made the age deadline by two months – probably the oldest ensign in the navy. I queried him about his weight – he told me he had dropped 90 pounds. When asked how, he said a lot of salad and a lot of Nautilus. He became a navy nurse. He intended to be a lifer. His first duty station was Camp Lejeune and he spent, I believe, six years there. It was during this time that it was later revealed, the water was contaminated by all sorts of nasty things – benzene to name but one. This wasn’t discovered until years after his tenure there and the military gave those stationed there special dispensation when it came to future medical problems. From Lejeune he was stationed in Guam. He once wrote to me and told me that he finally had figured out what Guam stood for: Give Up And Masturbate. I think that, as with many in the medical field, Leo was a bit of a hypochondriac. He was constantly having himself checked for this or that malady – including several trips back from Guam to Bethesda. I always say, that if you give doctors enough opportunity, they’ll eventually find something. Such was the case with my pal Leo. After eleven years in the navy, he was diagnosed with MS. He got a medical discharge, which eventually rose to 100% disability. Still didn’t slow him down too much – just changed calibers, from the big bores to .32 S&W Long. Bought a house out in the country and became somewhat of a hermit. He eschewed TV and the movies but was a voracious reader – amassing over 3000 books in his small house. Most rooms in the house were floor to ceiling book shelves – except for his reloading room, which was floor to ceiling components, loaded ammo and about five presses – so he kept busy and had a few close friends that kept an eye on him. He used to drive down to visit my SO and me and stay for several days at a time. We would do the rounds of the LGS’s. He was especially fond of our dog Maggie. Over the last seven or eight months, he grew increasingly hard to contact. I’d call and get his voice mail, leave a message that was seldom returned. Finally, there were no return calls at all. This sent me to the Internet to check the obituaries, as I feared the worst. No obit to be found. In my last visit to him, he had showed me a Trijicon RX30 red dot sight and offered it to me at a great price. I came home and thought about for a while and decided to buy it from him. I sent him a check. It was after this that he dropped from sight. One day I get a text from an unknown person. They told me that Leo was in the hospital and had instructed this person to send me the sight. I knew the name and had maybe met him once, but this guy turned out to be a saint. He found Leo sitting in the dark at his house. The electricity had been turned off because he hadn’t paid the bill. There was no telling how long he had been sitting there, but the food in the refrigerator had spoiled, so it was at least a couple days. Money wasn’t really the problem – although it was later found out that an unscrupulous care giver and a waitress at a restaurant he frequented, had taken him for several thousand dollars with their tales of woe. End game was that Leo became less and less lucid and even became combative. He was eventually 302’d and that was extended several times. He was diagnosed with dementia. It took them a while to sort out his meds (not sure they really have) and he is now living in a veteran’s home in Scranton, PA. I found all this out after another flurry of trying to track him down and/or see if he had died. I finally got hold of the fellow that mailed my sight (Scott). Scott related this whole sad story to me. He had been taking care of Leo all these months. Had gotten power of attorney and straightened out his finances. Helped him (he has periods of lucidity) liquidate his considerable firearms collection (at one point he had over 70 N-frame Smiths alone), go through the commitment process and eventually get him admitted to the veteran’s home. Looking back over what I have written, I noticed that I keep referring to him in the past tense. Make no mistake, he is still alive. I actually spoke to him today – which was the impetus for this lengthy post. He is not the Leo that I once knew, with whom I shared shooting experiences and discussed the pros and cons of one caliber over another, or the benefits of a particular Smith & Wesson and whether or not it was worth the asking price. I don’t know if it was the meds they have him on or just his condition, given the dementia, but it was just sad. I’m glad that he is being taken care of, in what Scott describes as a wonderful facility. But I have to wonder if it is all worth it. If Leo were cognizant of his condition, and still in possession of some of his prized S&W’s, I’m not sure that this wouldn’t have ended another way – and the sad part about that, is that I’m not sure that would have been a bad thing. I miss my buddy. If you have stuck with this, this long, thanks for reading this. I have to go, my keyboard seems to be leaking. Adios, Pizza Bob
-
The .44 Special is....Special
It's not a matter of "like", it's a matter of value. When I can get an equal quality clip at a dollar savings per unit, why wouldn't I avail myself of it? I'm surprised that Tom is letting S&W undersell him by that much on his product (he gets $2.50 per). Maybe since he has, once again, become a full custom shop, he isn't interested in selling the nickel dime stuff direct anymore. From what I gather, there are only four producers of moon clips - many sellers, but only four actual manufacturers. 1) TK Custom 2) Ranch Products 3) Revolver Supply (I believe that he is having them made, but they are proprietary) 4) David Hearth There are probably some coming in from China, at least for .45 ACP, and that's what you'll get buying them off eBay or GB. If the clips are die cut they will be considerably less expensive. If they are EDM (electro discharge machining) cut, you can expect to pay $5 - $8 per clip. For rimless cartridges the extractor groove dimensions are SAAMI specified, which is why you can usually use a variety of brass in the same clip and have it work well. For rimmed cartridges there is no SAAMI spec for the groove ahead of the rim. In some rimmed cartridges there isn't even a groove. These clips have to be more precise and usually are one or two headstamp specific. Ranch Products used to be the OEM supplier of clips to S&W. I imagine as they got deeper into moon clip guns they needed access to EDM cut clips and it didn't make sense to have multiple suppliers and since TK does both die stamp and EDM, he got the business. Although I believe that Smith is sourcing the 8-shot .38 Super clips from Hearth. AFAIK, Ranch only makes die stamped. Of course there is the snob appeal of having those little initials stamped in every clip. That's not worth a dollar to me. Adios, Pizza Bob
-
The .44 Special is....Special
They are probably buying their clips from Ranch @ $.38 ea. and making a dollar on every one that you buy. Yes I am!!! And quite happy to stay that way.
-
The .44 Special is....Special
You could save about $6+ per clip for your 1917 by using Ranch Products clips. Last I checked they were $40 per 100 - a lifetime supply. I have never had a problem with Ranch Products .45 ACP clips. With calibers that don't start with a "4" you need a clip that holds the rounds rigidly and that is where you end up paying $6 - $7 per clip. For the .45 and pretty much the .40, a little cartridge jiggle is a good thing - helps the rounds self-align. The cost of the clip is indirectly proportional to the length of time until a RO steps on it - the more expensive the shorter the time period. Adios, Pizza Bob
-
The .44 Special is....Special
I'll let you know. Spoke with a friend shooting one in IDPA. He told me that he had not had one light strike - and of course at that match he did. He was using expensive TK moons and TK said that they had some reports of light strikes. Their clips are .040" and they were talking about increasing them to .050". When I get set-up, I'll be using the inexpensive clips from Ranch Products that I already have on hand for my S&W 646. The people that I've heard from have not had any problem with Ranch clips - we'll see. My gunsmith is still working on the right spring combination and polishing to give 100% reliability. Like any new venture, you learn as you go. Adios, Pizza Bob