Everything posted by Pizza Bob
-
Shongum - USPSA - 03/03/2012
Ron will send out a status e-mail on Friday after 5
-
When is a magazine not a magazine?
I'm not going to argue the point, but your argument falls apart when you say it has "the capability to be reassembled into a working magazine which can continuously feed...." When it is a box of parts it is not capable of feeding anything. It must first be assembled and it is at that point that it becomes illegal - according to the statute. We're not going to convince each other, so I'll leave you with this thought. I know of a case where a man was arrested for possession of a model 1918A4 - that the police claimed was a machine gun. Along with the gun, multiple links were confiscated. He was NOT charged with any magazine related charge. It may very well take a test case to set precedent - but to my knowledge that hasn't happened yet. Adios, Pizza Bob
-
When is a magazine not a magazine?
Vlad: Again, you are arguing "constructive possession". If the two 15 round belts are not linked together, they do not have the ability to continuously feed more than 15 rounds. The statutes only address complete entities, nothing about components.
-
When is a magazine not a magazine?
OK, I've been cogitating on this since I last posted - and contrary to what I may or may not have said in the past, I feel that a disintegrating belt is not a "high capacity magazine" as long as it does not exceed the 15 round limit when assembled. What we are talking about here is "constructive possession" and there is nothing in the statutes or the AC that addresses unassembled ammunition feeding devices. About the closest you can come would be 2C39-9,h... h.Large capacity ammunition magazines. Any person who manufactures, causes to be manufactured, transports, ships, sells or disposes of a large capacity ammunition magazine which is intended to be used for any purpose other than for authorized military or law enforcement purposes by duly authorized military or law enforcement personnel is guilty of a crime of the fourth degree. ...and in this statute it only addresses magazines in their entirety - not parts, components or kits. The magazines must be assembled - or caused to be assembled - before any penalty attaches. As to Maks' point, I'm sure that is the vendor erring on the side of caution. Legally, it would seem, a kit with components to build a high capacity magazine would be fine - only when it is assembled, within the state, would it be illegal. IANAL, but it seems there is nothing in the statutes or AC that says one can be prosecuted for constructive possession. One point that I came across in the link about the Thompson Center SBR case, provided by Stickle was this interesting factoid... This circumstance caused the court to apply the rule of lenity since the NFA carries criminal penalties with it. This meant that ambiguous statutes are interpreted against the government. ..would it be safe to assume this applies at the state level? Adios, Pizza Bob
-
When is a magazine not a magazine?
RE: Disintegrating link belts: I think there may be some, on here, that will argue that point. I won't name names, I will let it up to them if they want to get involved.
-
Best 22 revolver???
Not something that can be imparted in a sentence, a paragraph, a page, or possibly even a book. Something that has to be lived and experienced. I've been a shooter for over 50 yeras and find that if you are only looking at the dollars and cents side of the equation, you are missing the big picture. You chose a good example because Harley riders as well as S&W and Colt revolver shooters "get it". Give it time Grasshopper. Adios, Pizza Bob
-
Is the call to references nesessary?
It is really up to the PD as to whether they follow-up with the references. It is totally within their purview as part of the background investigation which is why the STS-033 asks for two references. As has been pointed out, some PD's may make contact initially, but not on subsequent applications. Some do it for every application. Some don't bother at all - afterall, you'd have to be a complete moron to list a reference that may badmouth you, so what's the point? While recommended by the NJSP, it is at the discretion of the PD that accepts your application. Adios, PIzza Bob
-
Window shopping for a .45
Nah, they were only used through two world wars, Korea and Viet Nam - no mud draggin' there. Depends on which 1911, just as it does with any gun.
-
Best 22 revolver???
Ahhh, Grasshopper. So much to learn, so little time.
-
I Didn't Think Cats Liked the Water
Yeah? Well my amphibious attack tiger would smack your honey badger around like a mouse.
-
Shongum - USPSA - 03/03/2012
Absolutely - just bring eyes & ears. WARNING: You will kick yourself for not participating. You gotta dive right in. Lots of friendly folk at Shongum and we were all new at one time. Come on down (or up - depending on where you are). Adios, Pizza Bob ETA: Doh! You beat me to it j0n.
-
Best 22 revolver???
One of the market conditions that drives pricing on guns, is ammo cost. As centerfire ammo prices increase, people gravitate to rimfires causing a demand and subsequent price rise in the cost of rimfire arms. I think that is partially what we are seeing now.
-
Is a permit needed if
You can do a FTF without an FFL providing you are both NJ residents and the buyer has a P2P. Seller is responsible for properly distributing the copies of the P2P.
-
Is a permit needed if
To legally transfer it, yes you do.
-
Best 22 revolver???
MSRP is the same for both guns at $829. Street price is driven by the market.
-
Best 22 revolver???
I've been sniping from the sidelines throughout this thread but haven't really put in my $.02 worth on what I would like in a .22 revolver. I would absolutely love to have a Colt 4" Diamondback in .22. That being said, they're out there, I just don't want to pay today's going rate should I actually stumble across one. Another nice, but somewhat rare .22 is a Dan Wesson. It will be interesting to see how much of the DW revolver line CZ decides to bring back. Adios, Pizza Bob
-
Best 22 revolver???
That's correct, except the 617 would have a full underlug and the 19 just an ejector rod shroud - so the 617 may be heavier.
-
Best 22 revolver???
Not quite. 686 = L-frame / 617 = K-frame
-
New .357
They are nice and I've already stated my taste for G-10 grips, but these are for concealed carry in a boot-grip configuration for a snubby. Only two fingers around the grip, pinky underneath. The full-length grips that came on her gun are better suited to her intentions and a gun with adjustable sights and a longer barrel than most J-frame snubbies.
-
I Didn't Think Cats Liked the Water
- 9mm 1911
- Best 22 revolver???
I stand corrected. I was going by S&W's normal numbering pattern and this is the only example that I (now) know of where it goes outside the normal model numbering scheme. The model 17 is a .22 built on a K-frame. The prefix number 6 indicates stainless, thus a 617 is a stainless K-frame .22. The 3 prefix usually indicates a lightweight variation, so I was thinking that a 317 was a lightweight K-frame .22. Things started to get muddled when they went to 3-digit model numbering schemes. There may be other examples of this cross-frame model numbering, but since I was unaware of this one, it stands to reason that I'm unaware of any others. The 317 would indeed be considered a lightweight variant of the kit gun. The blued lightweight was called the model 43. There is no model 643. Why the 317 is an exception to their model numbering scheme is anybody's guess. Even with that, the 317 is 15 years old having been introduced in 1997. Thanks for the correction. Adios, Pizza Bob- Best 22 revolver???
That's a K-frame. Kit guns have always been built on the small frame (I or J) so they fit in your "kit".- Shongum - USPSA - 03/03/2012
Wish I could get a job where I could be wrong 50% of the time and not get fired.- New .357
Fixed it for you - it's a J-frame. Full length rubber grips cover the backstrap thus increasing the LOP - something critical for people with small hands. The Altamont wood grips that came on the Pro series 60 are full length and have an exposed backstrap.