Everything posted by Pizza Bob
-
FS: MINT SW 19-5
Yes it is, as well as a RR and WO. Somebody needs to buy this. Great gun at a great price. Adios, Pizza Bob
-
Anyone Looking for a High-End Lever Gun?
I visited my enabler this evening to pick-up the S&W 296 Ti that I previously wrote about. In the normal course of events I asked him what was new. Seems that they got some very nice guns from an estate of a local veterinarian - one of which I bought, but that's fodder for another thread. He pointed me to three rifles on the rack. These still had the hang tags on them and had never been fired. All three were Browning / Winchester / Miroku recreations. They are (stock photos): A Model 95 in .30-06 A Model 1886 in .45-70 A Model 71 in .348 Winchester They are all priced fairly - but not for the feint of heart. If there is any sincere interest in any of these, PM me and I'll give you the contact info for my FFL. Just a disclaimer - I have no vested interest in these guns or this dealer - this is just a PSA. Adios, Pizza Bob
-
Looking for a dual 30mm scope ring
If you are dispensing with the irons, why do you need a QD mount? And, if you want it as low as possible, why not just use rings, of the desired height, mounted directly to the rail on your receiver? That would give you the greatest mount position flexibility. Adios, Pizza Bob
-
Time for a lever action, need some input
My PC lever-action carbine is a .44 so I can't comment on actual performance, but I can on your barrel length question. Especially if you are using factory ammo, the shorter the barrel, the better. Don't forget that this ammo was designed for use in handguns with typical barrel lengths of 4" - 6". You may find that you actually lose velocity with the longer tubes and pistol ammo, due to "barrel drag". If you are a handloader, you can use slow burning powders to help mitigate this, but you still only have so much powder capacity. I vote for the short tube. Adios, Pizza Bob
-
Pistol Pemit Changes
OTOH, I wrote a similar letter to the township attorney in the municipality where I live, pointing out where they were in violation of the issuance statutes. I got a reply that he had reviewed the contentious areas and made the determination that they were acting within the law. Two years later ANJRPC sent out their letters, at which point my local PD stopped the illegal activities that I had pointed out previously. So, in that instance, a letter from a lay person, even though correct, carried less weight than one from an attorney. Adios, Pizza Bob
-
Pistol Pemit Changes
Golf Battery was advising a friend in an adjacent township about applying for an FPID and found several additions to the process. I wrote a letter to the chief of police and the mayor. They not only responded but dropped all the illegal additions immediately upon receiving my letter. Just ignorance of the law. When I politely pointed out the discrepancies and the statutes that forbade them, they were very appreciative and cooperative. So no, it doesn't always take legal intervention. Adios, Pizza Bob
-
Pistol Pemit Changes
I've attached the findings of Jeremy Perez - vs - Patterson, NJ that address a situation similar to the OP's. IANAL and don't know if this is precedence setting - but it should be. Adios, Pizza Bob Jeremy-Perez-vs-Patterson-NJ-for-a-Firearms-Purchaser-Identification-Card.pdf
-
Pistol Pemit Changes
With regard to added conditions: Many of these requirements are in direct contravention of 2C:58-3,f which states, in part: There shall be no conditions or requirements added to the form or content of the application, or required by the licensing authority for the issuance of a permit or identification card, other than those that are specifically set forth in this chapter.
-
Pistol Pemit Changes
See Matthew Lutz's response, but I want to add that this is the most time consuming check and the only legitimate reason for the extended issuance time some people report. It is my understanding that this is a manual records search - not automated, no comprehensive database - and is done for each county in which you have lived for the past ten years - hence the requirement for prior addresses on the SP 066. The more places you have lived within the last ten years, the longer the search process lasts. Adios, Pizza Bob
-
Pistol Pemit Changes
These are some of the most blatant abuses of the system and this PD needs to be reported to the ANJRPC. Adios, Pizza Bob
-
Ugly Duckling
The frame may be Scandium (in S&W parlance). Scandium is a rare metal and those guns that have "scandium" frames are actually an alloy of aluminum and scandium. Just the barest hint of scandium is all that is used in the alloy. It makes the metal harder/stronger. In reading various reviews on this model, just as with the weight, it has been referred to as scandium in some and aluminum alloy in others. The laser engraved atomic orbital diagram on the side plate is used on Scandium guns as is the tag line "Airlite". I thought I'd just play it safe and say aluminum alloy, which covers all bases. Adios, Pizza Bob
-
Ugly Duckling
Happy New Year forumites - and what better way to start the new year than by buying a new (to me) Smith & Wesson? As the title says, this one is a real ugly duckling. It's a model that I didn't know existed until I ran across one in a gun shop in New England in 2007. I should have bought it then, because they have about doubled in price since then. Water under the bridge. I was poking around the Internet, not looking for anything specific, when I ran across this one at a relatively good price. I made an offer and it was accepted. It will be several weeks until I get my hands on it - payment/shipping/transfer - OGAM. This is the big brother to the Centennial series of J-frame revolvers. It is built on an alloy L-frame with a 5-shot titanium cylinder. It is DAO with an internal hammer. It has a 2.5" barrel and is chambered in .44 Special. Only made for a couple years - introduced in 1999 discontinued in 2001 (probably because it was so ugly) - which means it has no internal lock. Depending on whose review you read, I've seen the weight stated at everything from 18 ounces to 27 ounces. I think it probably is in the 20 - 21 ounce range as my 325 PD is 25 ounces (bigger frame but bigger holes and one more of them). So here it is... A S&W 296 Ti I hope that your new year starts off as well as mine. Adios, Pizza Bob
-
Are there kits to DIY reduce cap of our Mags?
Check these out... http://www.magazineblocks.com/magento/ Adios, Pizza Bob
-
Stock Question
Yes, adjustable - not collapsible or telescopic. Stocks like the Magpul PRS with a screw adjustable length-of-pull are perfectly legal. The LOP adjustment on the PRS is only 1.4" (current specs). Remember that information gained on the Internet is only worth what you paid for it. Adios, Pizza Bob<---IANAL
-
Daily humor thread
Just wanted to thank CMJeepster for his contribution to this thread. When I saw the picture with his meme I thought, "That's not historically accurate". Living where I do (within walking distance of where this occurred) I have seen the re-enactment numerous times, supposedly in the boats of the type used. The picture caused me to do some research and I found the painting used in the meme and the story behind it. Seems we have been misled all these years ("lied to" is such a strong condemnation) and the painting in the meme is likely the more historically accurate depiction. For anybody else that's interested, here's a link... https://cityroom.blogs.nytimes.com/2011/12/23/a-famous-painting-meets-its-more-factual-match/ Not sure that I'll ever view the re-enactment the same - LOL. Merry Christmas to all. Adios, Pizza Bob
-
Wait... What... The Mag "fix" law for LEOs is 17 rounds, not 15...
This so easily disproven when you look at percentage of hits to shots fired, LEO's vs. civilians that I wonder if ANJRPC used this tactic in their challenge.
-
Federal Black Label 223 55grain - 300 round $64.99 AR + Free Shipping $4.33/box
Plus - Background check from whom??? It is prohibited to use NICS for anything but firearm purchases. That would mean that a whole new, state created, owned, administered database would have to be established. Ah, who cares? It's only money. LOL. Adios, Pizza Bob
-
Good 22LR Revolver
Boy, I've been out of touch about rimfires or Rugers or both. Looking on Ruger's website, $600 is almost MSRP for the Single Six Convertible ($629). Street price on that should be around $500 - $550, and that gives you dual caliber capability. For some reason people seem to think that rimfires should be cheaper than the centerfire counterparts. Unless the manufacturer is using cheaper materials like cast zinc alloys (Rough Rider?), it is just as difficult and the materials are just as expensive as a centerfire - guess I was guilty of that in this case. The S&W 617 would make a fine companion to your 686 (good choice - I have a few S&W's myself), but it is definitely a buy once cry once proposition. A model 63 won't save you any money, but if you have kids or a companion with small hands, the 63 is a great choice. Good luck with whatever you choose. Adios, Pizza Bob
-
Another Bogus Article
https://www.msn.com/en-us/news/us/2018-is-worst-year-on-record-for-gun-violence-in-schools-data-shows/ar-BBQH4Ht Please note a couple things: 1) Who released this 2) That this is a British newspaper 3) The criteria used in determining what constitutes a school shooting Talk about fake news. Read and wretch. Adios, Pizza Bob
-
Glock 35 Feed Failure help needed
I think I spotted it............ there is no cylinder. Just another useless response. Adios, Pizza Bob
-
Percentage of Gun Ownership Per State
This^^^^^ Where are they getting their numbers? An all-encompassing database violates federal law and anything less is only partial and thus inaccurate. Maybe from NICS requests - but that does not mean a firearm was purchased. Polls? Who of you out there would answer a random pollster as to whether you owned guns? Plus, they can't poll everybody, meaning there would have to be extrapolation. This is all BS. Adios, Pizza Bob
-
OK - I'm Legal
Just so LEO knows, I've taken all my high-capacity revolvers and restricted them to either 6 or 8 rounds. Hope that you're happy Murphy. Seriously though, contrary to popular belief, I do own a fair number of bottom-feeders,and an AR or two, also. I spent about three hours on Thursday combing the house for any mags >10 rounds, and then bagging and tagging them. They all now reside, happily, with my son in PA. I then placed an order for some compliant mags for those guns for which I didn't already have some on hand. I really have a problem with wrapping my mind around making a law that applies retroactively. How we are made felons by the mere stroke of a pen, based on goods that were 100% legal when purchased, and worse yet - still legal in the majority of locales in this country. It really galls me to be able to walk out of my house with items that could put me in jail, walk less than 3/4 of a mile and be legal again. Here's hoping that the Supreme Court rectifies this injustice. I'd wish for the liberals to get their collective heads out of their a$$es, but that doesn't seem very likely - they're too busy trying to appear to be "doing something" even though it has zero impact on the problem. Rant off. Adios, Pizza Bob
-
Daily humor thread
- Long Gun Purchase Cabelas DE?
Yes, PA is a POC state also, but most dealers, whether going through an intermediary or going direct, do not show that charge on the gun invoice / receipt. For sure it's rolled into the price of the goods and is considered the price of doing business. Welcome back Maks. Shooting Shongum this Saturday? Adios, Pizza Bob- Long Gun Purchase Cabelas DE?
Not new - a federal mandate that has been around for 20 years. Brady Bill was passed in 1993, but infrastructure for NICS was not in place until 1998, - Long Gun Purchase Cabelas DE?