Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. GRIZ - I think we agree on things far more than disagree. My thoughts were based on the OP's declaration that this was to be a HD gun. I envision that as someone who has never had a gun before, going out and buying what the counter guy is pushing that day, firing maybe a box of shells through it and then it goes in a drawer, never to see the light of day again. The OP at least is soliciting opinions and actually setting themselves up to be an informed consumer and make a wise purchase. I pointed out that a revolver would be a great range gun and by that I meant should be used only for that purpose until reasonable competence is obtained and then maybe be pressed into service as a HD weapon. Few people are willing to put in the time, nor are there many competent revolver instructors about, so recommending a bottom-feeder just makes more sense. I hope that the OP sticks around and keeps us filled in on both his and his wife's progress in this regard. They need to know that there is no right or wrong answer - it is only what works for them - and they seem to be working toward that. Adios, Pizza Bob
  2. IIRC you said that you are in Somerset. I'm not sure if they are accepting new members at this time (Krdshrk can let you know) but Somerset County Fish & Game Protective Association is probably close by and they have an indoor range. Adios, Pizza Bob
  3. Let me just say this about a revolver: First, GRIZ is 100% correct in his advice to stay away from buying a J-frame (small frame S&W) - a lot of gun store commandos are going to push you in that direction. Second: If this is to be used as a home defense weapon, I'd stay away from revolvers all together. To those that know me or my postings, that may seem counter-intuitive. Here's my reasoning: The double action pull of a revolver is not only heavy, but long - and DA is how it should be used in a defensive situation. To use it in single action mode, in a defensive situation, is to invite a negligent discharge and the possible ensuing lawsuit. The adrenaline is running high in this situation and the SA PULL of a revolver is pretty light (if it isn't you've bought the wrong revolver - LOL), just too easy to apply more pressure than intended on the trigger. As a range only gun, at least initially, the revolver is fine, and if you master using DA with the revolver (I'm still trying) just about everything else is easy to shoot. But to start off with one as a HD weapon is not a good idea in my opinion. I think the people steering you toward a 9 mm semi-auto are on the right track, but that still leaves a myriad of choices to be made. Follow Mrs. Peel's advice and attend one of the get-togethers and you'll be able to try many different guns at minimal cost. Good luck. Adios, Pizza Bob
  4. Wow, very nice. Love the Palma sight.
  5. Just thought I'd add some closure to this thread. I shot the match yesterday. I'm happy to report that my thumb is still attached and functioning and I somehow managed not to finish in last place. Being away from competition for three months I did make many neophyte mistakes. I had more procedural errors yesterday than I probably had in the last year. I shot too fast, at the expense of accuracy. Reloads weren't the smoothest, but overall I'm happy I got through it unscathed. Off to the doctor today for, what I hope, is my final visit. Acid test next Saturday when I break-out the Major PF revolver at Lower Providence IDPA. Thanks to all the well-wishers - three months is an interminably long time to not shoot. Adios, Pizza Bob
  6. Unqualified people who park in handicapped spots.
  7. For a bigger pool table?
  8. Or three or four, maybe five or six
  9. PM sent
  10. I'll be shooting Mr. Stu's IDPA match this Sunday (8/19) at SCFGPA. This will be my first match since the Somerset match in May. I broke the thumb of my strong hand in early June and it had to be surgically repaired (I'm now the $54K man - at least that's what it cost). So after months with it being held stably in various contraptions and then some physical therapy - I figure I am at about 97% and anxious to get back to it. I think the only thing that may cause a bit of pain is pushing the cylinder release forward for reloads - but it's a transient pain, so I should be OK. I'll be happy just to finish DFL - as long as I finish. I'll be shooting my 586-4 Brazil with mouse-fart .38 Spl loads. If all goes well, I'll break out the 625-8 PC (.45 ACP) next week for IDPA at Lower Providence. Adios, Pizza Bob
  11. Thank you. The alternate grip will be a while in coming yet. Kind of mimics the style of Pachmayr Compacs but in checkered wood. Seemed appropriate for a short-barreled revolver. Here's a stock pic... Adios, Pizza Bob
  12. This is an N-frame and as such is considerably larger and heavier than your Model 19. However, if I were to carry an N-frame in .45 ACP, I'd carry my Model 325 PD which gives you the punch of six shots of 230 grain goodness and weighs more than a quarter pound LESS than the 2.5" Model 19. I prefer to have my cake and eat it too. Why all the hate for the IL - if you dislike it that much, disable it - takes about 15 minutes. If you object on aesthetic grounds, there are plugs made to fill the hole. You are missing out on many fine revolvers if you let the presence of the IL dictate your buying preference. Adios, Pizza Bob
  13. Attended the Oaks Gun Show on 8/5 with a friend. He had some specific wants and I was just tagging along to see if anything "spoke" to me. We walked all the way through both rooms (this Oaks was advertised as being a 1000 table show). My friend's FitBit indicated we had walked almost 2.5 miles. Clear back in the corner of the first room was a small dealer with two handgun display cases. A quick perusal revealed a short-barreled revolver with ill-fitting grips. It appeared to be an N-frame S&W and when I asked to see it that assumption was borne out. A Model 25-14 which is chambered for .45 ACP. These had a 3" barrel, and a four-screw, square-butt frame. And the price tag was a bargain. I believe that it was overlooked by the previous day's crowd of shoppers because someone had fitted it with K/L-frame Smith target grips - which, while they will go on an N-frame look really bad. I didn't buy it right then because I wanted to do a little research before I "pulled the trigger." My research at home revealed that this was a Lew Horton Distributors special. In 2006 he had contracted for 500 total units - 250 in blue and 250 in nickel. The blue and nickel had unique serial number prefixes. These were made on what Smith calls their Classic frame - which just means the screw in the upper sideplate returns, making it a four-screw frame. Also it has striations on the front and back strap of the grip frame. I e-mailed the seller and told him that he could keep the grips and offered him $60 less than the asking price. He countered with a $10 increase and I couldn't figuratively reach my wallet fast enough. Ordered two sets of grips while I was waiting for the gun. Picked it up last night and installed the grips right at the dealer. So without further delay, here is number 63 of 250... The grips are Altamont bonded-ivory magnas with a BK grip adapter. The N-frames are taking over my safe. Adios, Pizza Bob
  14. For precision loading with a single stage press, there are none finer than the Forester Co-Ax press and a good set of bench rest dies. https://www.forsterproducts.com/product-category/case-sizing-lubricating/co-ax-reloading-press/ Look around for the best price on the press. Adios, Pizza Bob
  15. I don't have any newer Smith rimfires, but if your 617 has a floating firing pin (frame mounted), then remove the side plate and pull out the firing pin and spring. Inspect the pin for breakage and the spring to make sure it isn't broken. Clean the firing pin channel and retainer. Do not lube on reassembly. Beyond all the above suggestions, a trip back to the mothership is called for. Adios, Pizza Bob
  16. As the law is written they are simply complying. The funny part of this is that, I was told, the inclusion of slingshots in this statute was a typographical error. The original text of the bill called for Slung Shot to be banned... https://en.wikipedia.org/wiki/Slungshot ...an overzealous secretary or an auto-correct program changed it to slingshot. So, as Paul Harvey used to say, "Now you know the rest of the story." Adios, Pizza Bob
  17. Sent PM. Welcome to the forum and this hell we call NJ. Adios, Pizza Bob
  18. You need to rehab for any joint injury if you want it to return to 100% functionality. As a shooter, that's rather important to me. The fragment of bone to which the ligament is attached need to be reattached using titanium inserts and screws. The thumb is a rather important digit, try living without it - not fun. Adios, Pizza Bob
  19. It doesn't take much heat to make it pliable. He used hot water and started molding it by hand until he deemed it cool enough to the touch to directly mold to my wrist/hand (it was warm!). It may not be Kydex per se, but a very close thermoset plastic relative - looks like a duck, quacks like a duck, etc. Adios, Pizza Bob
  20. I broke the thumb of my dominant hand on 6/8 playing pool. Yes, that's what I said: playing pool. I was breaking and hooked my thumb on my pocket, hyper-extending it and the ligament broke the bone. Had it surgically repaired on 6/18 (I'm now part titanium) and have been in various thumb-immobilizing devices ever since. Yesterday I went to the therapist who will be rehabbing my thumb (starting 7/16) and he custom formed a splint made out of, you guessed it, Kydex. Held in place by two Velcro strips, which make it easier to remove for showering. I think I'll have about four weeks of therapy, once we commence, and will probably be back at the pool table long before they will allow me to shoot guns again. The therapist does take hobbies and pastimes into consideration and he was interested to learn of holsters made of the same material as he used for splints. My summer competition season is pretty well shot - if you'll forgive the pun. At least my senior pool league team finished first in the league, undefeated with a perfect 20-0 record. We play other senior centers around central NJ. I may pop up at a match just to spectate, when I get to missing it too much - otherwise I should be back shooting in the fall. Adios, Pizza Bob
  21. Chris - How about laser engraving? I think you can duplicate just about any electronic file so the sky is the limit as to what you could have engraved, as long as the part would fit in the engraver's machine. Adios, Pizza Bob
  22. The reference and employer requirements on the STS-033 are probably the most abused pieces of information garnered from that form. This is as a result of having 500+ municipalities that issue permits and FPID's and their individual interpretation of how they are supposed to use the information gained. The employer requirement is to be used for employment verification ONLY. It is not to be used as a defacto reference, nor should the reason for the inquiry ever be disclosed. The questionnaires that some PD's send out to references likewise should not disclose the reason. These are for character reference purposes. The legality of the such letters or questionnaires is questionable. They may be considered an illegal additional requirement or form. My township stopped using them and I understand it was as a result of being contacted by the State AG. Here is the language in the Administrative Code that bears on the privacy of your application and, by my interpretation, means the fact that firearm permits are involved should never be disclosed because they are breeching confidentiality in violation of NJAC 13:54-1.15, which states: Any background investigation conducted by the chief of police, the Superintendent or the county prosecutor, of any applicant for a permit, firearms identification card license, or registration, in accordance with the requirements of this chapter, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such investigation, including the applicant. Any application for a permit, firearms identification card, or license, and any document reflecting the issuance or denial of such permit, firearms identification card, or license, and any permit, firearms identification card, license, certification, certificate, form of register, or registration statement, maintained by any State or municipal governmental agency, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such documentation, including the applicant, except on the request of persons acting in their governmental capacities for purposes of the administration of justice. IANAL Adios, Pizza Bob
  23. I knew Steve pretty well. He used to post on here under the moniker of Cave Diver. This is a real shock and my heart goes out to him. Adios, Pizza Bob

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.