Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pew Pew Plates

NJGF Vendor
  • Joined

  • Last visited

Everything posted by Pew Pew Plates

  1. Everything except goldenshits and thundercraps runs very well. I peek into the misfire container at my range often, and %90 of the .22 is remington that is duds. Usually with multiple rim strikes!
  2. Probably faster than the RSX-S though lol
  3. Full album here: http://s47.beta.photobucket.com/user/Glennp07/library/#/user/Glennp07/library/Sahsas%20Photoshoot%2011-24-12?&_suid=135394469404602696856719578022 Did a photoshoot yesterday with my buddy, heres a few teasers
  4. cute feet there mike http://www.eabco.com...022_tribute.htm Theres the link for the carbine goodies. Dont get the phoney stick mag things. I did because I thought it would look more proper but their dimensions are very cheesy and look nothing like an m1 carbine mag. Plus, you have to glue them on your existing mags. No thanks, I sent them back.
  5. 10/22.... Looks like im preaching to the choir lol
  6. Picatinny is best, in my opinion, One piece is the most solid in terms of scope mounting and actually makes the receiver (even) more rigid and yes, the military uses them. Picatinny is picatinny, weaver is weaver, etc etc. There are cheapy and super expensive rings for any mounting option. Second pic is 5 rounds at 100 yards. Its definately not a sloppy mount!
  7. I have a EGW 20moa picatinny on my 700 and its solid. Make sure to torque everything to spec.
  8. Tech sights (AWESOME) and M1 carbine stock
  9. I have a tag on mine, contacted the man it was issued to. He confirmed it was his, asked how I got it. I replied, asked him for pictures of him in the service or any other info he could possibly furnish....never replied again. Bummer
  10. Buy a utility pouch for a leather man type tool. They are like $5
  11. About the warrenty, S&W is best in the industry. What they say is not what they do. Their customer service is unbeatable! It also says they are not responsible for customer goof-ups and only defects in workmanship, but when I screwed up a pin in my S&W 1911, they removed the pin, replaced the pin, cleaned the entire slide, and gave me a new extractor (even though nothing was wrong with it... lol) No questions asked, 1 week from leaving my hands to back at my doorstep
  12. The hi-cap PAP with side rail (not junky dust cover rail) http://www.classicfirearms.com/long-guns/papriflews For $20 more than the "russian red classic" you can get yourself a milled receiver. Throw a slant brake on in place of that weird lookin' abortion on the end there and you have yourself a fine rifle http://www.atlanticfirearms.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=1663&virtuemart_category_id=23 Polish underfolder http://www.atlanticfirearms.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=1429&virtuemart_category_id=23 If you really want a saiga based rifle: http://www.atlanticfirearms.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=1538&virtuemart_category_id=23 These are a boat load of fun and LOUD but sorta drifting here with the theme lol http://www.jgsales.com/hungarian-amd-65-sa-2000m-ak-47-rifle,-feg-receiver,-tgi-import,-w-side-folding-stock.-p-3115.html All of these require modifications to be NJ legal before transfer
  13. Never said the rifle needed to be a Saiga Not saying the rifle is worth the $999, because its most definately NOT, but theres more than $200 of parts there It has a new $50 gas block, new front sight base $20, $100 of furniture and then the trigger stuff and retainer. (plus the brake and rod you excluded) and of course labor.
  14. To do it on a lathe you would need to remove the entire barrel from receiver to chuck it up. Use a die and thread alignment tool. Easier to buy a rifle already threaded but I digress http://forum.saiga-12.com/index.php?/topic/7652-barrel-threading-tutorial/
  15. They seem to have greatly improved now, with nothing being problematic except their old legacy lol
  16. OK, few things. Remove the dust cover and examine along the edge of ejection area. Do you see markings from cases hitting it? If you do, it may not be the problem anyways. Try shooting it with the dust cover off. If it doesnt happen with dust cover off, your ejection angle is funky. Thats only one indicator though, although I would troubleshoot that first before you start doing permanent changes. My hunch is your ejector is not shaped quite right. Remove dust cover and slowly pull the bolt back and look which part of the ejector goes through the bolt face first. This is what hits your case first. It should be be at the edge then work its way in due to the curve of ejector. Another way to see where its hitting is look at the face of the ejector, you will see where the cases have been smacking it. With the shape of yours its probably the tip, and thats wrong. Look at my ejector, see how it doesnt stick out like yours on the end? On my PSL, I had to relieve the top rail actually because it was stovepiping against it. Brass marks here will reveal the issue. To see what im talking about look on the right hand rail (bottom of picture). The relief starts on the top rail, just foward of the tip of the selector, and continues until it bulges out right before that rope you see. The first photo is from somewhere else but outlines the area. That cut is quite drastic though! I'de go a little at a time, beveled, untill it functions reliably (if this is your problem). The final photos are my PSLs cut. If you are super downright confused, send me a PM and we can talk on the phone. EDIT: It appears you have the relief cut already so I'm thinking you need to hack away at the ejector tip
  17. Opinions are like a-holes, everybody has one. So my bulk of info below is going to be opinion free My opinion though, is WASR-10. Grab and go. Its a military spec AK variant out of the box (unlike the other two) and ready to go. Why no other considerations? You can buy any AK and have it modified to be NJ legal. It opens up your options much broader. I am affiliated with JET Agent LLC (forum vendor here) and we modifty and transfer rifles all the time. Then you can get fun stuff like RPKs, AMD-65s, AK-74s etc. Vepr: Pros: 1.5mm receiver. Adds weight, lessens recoil, theoretically adds accuracy and strength (negligable) High quality build Cons: Not in "military" configuration out of the box Expensive Not a simple conversion to mil-spec Not possible to authentically make a clone of any military varient except RPK due to receiver design (not an issue for most people) Saiga: Pros: Cheap Good quality Cons: Must convert for it to be useful Converting makes a cheap rifle not cheap anymore full conversion to make it mil-spec (not just pistol grip) exceeds cost of an already built rifle, plus takes your time and energy Must have basic hand tools and basic mechanical abilities (not really a con, more of a requirement) WASR-10: Pros: Mil-spec out of the box, full blown proper AKM ready to rock Good quality Requires no work Cons: Older ones have spotty QC issues.
  18. So if you carry without a permit you automatically go to jail? ....you guys are off base. That only happens if you get caught.
  19. Im partial to the Cougars myself, my first handgun ever shot was a Beretta Cougar .45 Never having fired a handgun before, the .45 was still do-able. I think I was about 12-13?
  20. You sure could get away with it even easier than usual...
  21. For Irene I used a welding machine... Left it out running in the pouring rain, it didn't care. And I'll do it again!
  22. Nothing but the finest of cullinary experiences for me! I also just noticed what I believe to be a gay pride license plate frame. The colors are the same colors in the same order as the gay pride flag
  23. I saw this and I thought it was super awesome. Probably a coincidence, but for those of you whom may not know, the M76 is a yugoslovian sniper rifle. Bam!
  24. Lehigh valley has them for sale and I believe you can demo them as well!

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.