Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pew Pew Plates

NJGF Vendor
  • Joined

  • Last visited

Everything posted by Pew Pew Plates

  1. Striker fired doesnt mean DAO. On glocks (not sure about walthers) the striker is precocked to an intermediate position. If you dry fire it you cannot pull the trigger and keep dry firing, you need to cock it again. This is not double action.
  2. With a semi auto pistol round, the objective of a crimp is just to keep the bullet from seating deeper in the case upon chambering. With a revolver its actually the oposite, its to keep the bullet in the case and to prevent it from pulling out under recoil. Anyways, the revolver part is pretty irrelevent right now so lets go over the semi-auto strategy. This is what I did for my 9mm/.45 acp rounds First, you adjust the crimp die so that it straightens out the flare. Do the following with a dummy round with no powder/primer. The flare should not really be able to be seen but once you get a little squeeze out of the crimp and the rounds drop into a case guage (or your barrel) then you measure the round. Now, chamber it and measure it again. A teeny bit of change is OK. Now chamber it 10 more times. Is it setting back alot? If so, pull the bullet and start over again but this time crimp a little more and repeat. If its not setting back, any more crimp is just a waste and detrimental to accuracy and case life.
  3. If you were over-flaring, the mouth would fold. If you were seating too deep, nothing would happen visually except a deep seated bullet and high pressure. You are over-crimping. Try backing your crimp out a hair. When I was adjusting the dies for my 500 S&W for maximum crimp I just kept going down untill it bulged the case and it looked exactly the same as yours. Back out a hair and they dont bulge anymore and I know im getting the maximum crimp possible. You dont need that much crimp, though.
  4. Had a tree go down in our street and block the road so got the scout car out with chains and dragged it to the side. Was a fun way to help out the neighborhood!
  5. A chore boy punched through the bore with a jag will remove those last little deposits I see on your rifling with one pass
  6. I can help out, rifle pistol or shotgun
  7. I'll put my K38 up against any ruger revolver, there is no comparison
  8. Not quite... the law reads "Flash hider or threads to accept a flash hider" So if you have just threads or a flash hider on threads and its removable, its still just one feature either way. Now, if there has NEVER EVER been a flash hider made for a particular thread....fair game! This used to be the case for romanian muzzle threads and brakes during the federal ban. ATF said you can keep the threads because there were never flash hiders made for those threads therfore they arent threads to accept a flash hider... ...not that I would suggest doing so. If you did, I'de machine myself an oddball thread that does NOT exist anywhere else.
  9. Well, you dont really build ARs. You just assemble them. That being said, your best bet is so take one of these, they are actually a build and much cooler and build this for an ultimate fun PA toy
  10. 10 for pistol. I went as far as getting 10 round mags for my 1911. It makes it nice and easy, 5 mags for 50 rounds, 10 rounds per target. Its nice and even and at the end you dont have 2 rounds left just sitting there. 5 would accomplish the same thing but thats not enough, I dont want to break my grip to reload and screw up my group.
  11. My springfield works flawlessly also, but more than half the owners I have spoken to (probably more like 3/4+, im being generous here) have had to send their gun back at LEAST once for one reason or another. I dont want to be bothered by having to do that...
  12. For the money you cant beat a S&W I love my pro series. This is 10 rounds 25 yards offhand. For me, its pretty damn good. Ive put somewhere around 4k rounds through it without a single jam, and they are all dirty cast SWC reloads, 200 grains going a measly 726 FPS Avoid Springfield Armory at all costs. Nothing but problems.
  13. That would be so fun to bring to the range and try to tag plates at 100 yards with indirect fire
  14. dude, dont get ripped off there. you would save money even after gas by driving out to walmart in easton
  15. Damnit Eric, were building 5.45 mosins!
  16. Looks like vaporized lead from lead loads. Try GENTLY scraping it? If not, take a brass carraige bolt chucked in a drill and recrown it yourself. Use lapping compound then finish off with flitz
  17. Pansy grips. I shoot it one handed half the time with above-max loads (350 grains at 1900 FPS) and it has never doubled.
  18. Not with the cloths. I can get the front of my S&W 500 cylinder clean with just the cloths. When you are pushing 60k PSI loads out of it it really cooks that fouling on, and it just wipes off...never needed a brass brush
  19. I have a guaranteed solution: Lead-away cloths Tada. USE ON STAINELSS ONLY they will rub it to bare stainless super quick, through lead, fouling, anything. They will also "clean" the blueing on a steel gun right off if you use it on a steel gun so dont do that lol. It is a chemical, not abrasive cleaner. They even smell good lol http://www.midwayusa.com/Product/210159/kleen-bore-lead-away-gun-cleaning-patches
  20. My neighbor jumped off the GW. My friend at the RR (I believe) pulled him out after he floated. My friend is a NJSP on the water officer. Apparently in the area theres a few jumpers every week. He said once a guy jumped off a bridge (Not GW, i forget which) and it was low tide and the guy landed head first into muck and stuck upright. Eye witnesses say he survived the fall and his feet were flailing around for a minute or so. Crazy stuff.
  21. Tig will yeild the cleanest weld and coolest weld. Thats what I use (JETagent)
  22. AKM is your standard "AK47" AKM is saiga, wasr-10, SAR, arsenal, waffen werks, IO, etc AK47 is T1, T2, and T3. Of those only the T3 is available and thats the typical milled reciever guns you see. T2 is also milled and T1 is stamped but not many made and they were all full auto. I have only seen one T1 semi auto ever built. Infact, thats the only T1 at all I have ever seen in private hands.
  23. I <3 rubbernecking
  24. If that was the case your recoil spring would be worn out after 8.33 minutes of the slide being locked back. Thats how long the slide is compressed for 10,000 firings, and obviously that is not true. Recoil and magazine springs will behave the same as far as what wears them out. Compression/decompression cycles is what kills springs.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.