Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pew Pew Plates

NJGF Vendor
  • Joined

  • Last visited

Everything posted by Pew Pew Plates

  1. Yes. Swivel I would interpret as something that would allow the rifle to turn 360 degrees around. Rotating, like the BRM-S allows, means you can simply tilt it left or right to adjust for uneven ground. Like, if you are laying on a hill, shooting along it, your rifle is going to be at an angle . You could rotate it on the bipod so that it is straight up & down.
  2. You are talking about left to right swivel, or rotating? The Harris BRM-S bipod is what I have on my 700 and its great. You can rotate the rifle if you are on uneven ground. For left to right, you just turn the rifle... I havent seen a swivel on a bipod (not to say they arent out there, im sure they are) but I see no need. It would make it very bulky and add nothing that you cant do by just...turning the rifle. Keep in mind that the ultimate in accuracy will be obtained with sandbags and not a bipod. If you insisnt on using a bipod off a bench pop some pill caps under its feet so they slide consistantly and easily. This will also help with your turning left-right "issue".
  3. having taken one apart...those things are the WORST gun design I have EVER SEEN. Who the hell designs a gun that you need to take the stock off to remove the bolt? and who in their right mind makes a 2 piece action bar? Jeez! But yeah other than that and the Sigma, S&W is da bomb-diggity
  4. I still believe that the bi-metal safe is %100 fine for your gun. People dump tons of that stuff downrange with no ill effect... Whatever, more for me
  5. Once I told a Mexican in that chat that Mexico is America's beard and he called me a fat American and to go eat cheeseburgers and then left lol. This was after a 15min normal conversation. Doesn't everybody know that Canada is America's hat and Mexico is America's beard!?!? Geez
  6. Amazing movie. I want to get a ak74 with triangle folder and beat it up after watching that movie.
  7. using img tags you dont need anything other than the direct web link to your pic like this
  8. Takes lots of planning... Its why I'm polling the popular sizes
  9. This is why I never suggest the SA 1911s no matter what caliber..... nothing but widespread problems
  10. Swaging is better because it simply presses the displaced brass back in versus cuting it out. Your primer pockets will thank you for it Also, it is faster, cleaner, and easier to swage than to cut. Its only downside is it costs more to get set up.
  11. Grafs is the best for hazmat stuff. Buy alot and you save alot. Buy too little and you get raped with hazmat fees.
  12. What do you guys think about this design for the round ones? I think im going to squish down the top a bit to save plate and because you dont need that much extra for the holes
  13. By a little less water, I literally leave out a splash, probably 4fl oz or so. Its really nothing but I can at least pretend im not overloading it as much Just gotta make sure theres SOME space between the water and the top. I believe that will help agitate.
  14. I wonder if it will work with wolf ammo lol I almost want one...
  15. No, I'm not going to have them made untill Im sure I can sell them... I gotta get 1020lbs of targets all or nothing lol
  16. torch table. will leave a minimal HAZ because it will run very smooth & fast
  17. Looks like I may change the 9" to 8" so they can fit in medium flat rates. The 12" will fit in large flat rate. A few can fit in each... hmm
  18. how many/size? I need to know what the trends are here
  19. Shouldnt be too much. Def wont be any more than an out of state vendor since I have a UPS account and ship from work. If you buy more than 60lbs then we can meet halfway perhaps. Im thinking a 25lb package to anywhere in NJ somewhere between $15-20. The plate weighs about 20lbs/sf
  20. This has the potential to morph into a group buy. I would like to see what shapes/sizes are the most popular and most importantly, how many people would be willing to put money down on some targets. Depending on sizes I need commitment for around 70 targets! This shouldnt be TOO hard considering some people may buy a few... the objective here is to buy and cut a 5' x 10' plate. I would require small deposits so that im not stuck with 1,020 pounds of steel targets and to help fund the buy. Anyways, pricing... $22 for 6" diameter plate ($20/each if 3 or more purchased) $52 for 9" diameter plate ($50/each if 3 or more purchased) $82 for 12" diameter plate ($80/each if 3 or more purchased) Square plates im not sure of on pricing but assume they will be very similar to the circles. Before anything is cut I will confirm pricing on squares but dont think they will change, but I dont want to bother the company with 500 different pricing alternates. There will be one link of chain welded to the backside of the target for hanging on request. Please take the poll for what size you would want (you can select more than one) and reply in the thread how many you would take. These plates are true AR500 and they are 1/2" thick not the typical 3/8"! These will take pretty much anything short of .50 BMG I can ship them or they can be picked up either in Plainfield or Bridgewater.
  21. Link of chain is possible. Plates can be square (shouldnt affect price much/at all). What sizes do you guys want?
  22. $22 for 6" diameter plate ($20/each if 3 or more purchased) $52 for 9" diameter plate ($50/each if 3 or more purchased) $82 for 12" diameter plate ($80/each if 3 or more purchased) AR500 spec, 1/2" thickness. Round plates, unpainted, no holes/hardware. Shipping available or can pick up in Plainfield or Bridgewater. Please post what size you guys would want/how many. Still figguring out if I should do this/how many of each size. Edit: I may be able to punch a hole for mounting in these for no additional cost. Currently investigating. What size hole do you guys want..?
  23. Guaging interest on a group buy for AR500 1/2" thick targets. They will probably cost the same as the 3/8" targets out there but they will last forever.... I need to get a 5'x10' sheet worth of orders to procede. Anyone in?

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.