Everything posted by Pew Pew Plates
-
storing ammo at home
I stack it on my basement floor. I had it upstairs but there was concern over a floor collapse from the weight. No, not kidding lol
-
M&P thumb safety
Well.... I wouldnt pack a loaded gun in a case. And if I did, under the assumption that it was unloaded, I wouldnt put the safety on anyways. As for holding suspects at gunpoint... would you do that with the safety on anyways? It would be off, in which case it wont be preventing anything...
-
Great pic
In WWII, we dropped bombs on europe. derpderp awesome pic
-
M&P thumb safety
You cant just leave the safety off. Part of my problem with them is that they can be put on by accident or break in the on position at the worst times. Anything mechanical can and will fail. Less devices the better. Its not like with a safety you can all of the sudden point it around unsafely or anything so whats the appeal? Keep you booger hook off the bang switch and it wont go bang!
-
New Jersey Gunsmiths that build Milled AKs?
JG sales has them. Sometimes when it says out of stock they are in stock and visa versa so its best to call and ask. http://www.jgsales.com/product_info.php/rifles/ak-pattern-rifles/p/polish-ak47-1960-model,-7-62x39,-w-milled-receiver-backordered-/cPath/209_214/products_id/4082?osCsid=e615a8aa957df418f52449af9f1f32e7 JET agent (forum vendor) can recieve it and modify it to be NJ legal. The brake has to be welded on and the bayonet lug nuetered.
-
New Jersey Gunsmiths that build Milled AKs?
Never heard of Ted. I would go out of state, theres alot of talent out of NJ... Do you already have a kit? I bought one of the Century polish milled and I must say it is a VERY well built rifle. Theres a few nitpicks I have with it (lightening cuts were done with end mill vs horizontal key cutter, parked not blued, etc) but for the price you cant beat it
-
Range trip to Philly Archery & Gun Club
I shot my very first pistol there when I was quite young, a Beretta Cougar m8045. I remember Jessepe, an old italian guy, teaching me how to shoot it. My sister lived right around the corner from there so every time we went to visit her my dad would take me there and we would rent guns. Eventually when I turned 16 my dad got "me" a mosin and we would bring it there. We joined, too. But my sister moved out and I stopped going. They left a foul taste in my mouth when they wouldnt let me function test my 1919 there. I was going to sandbag it or tripod it (both of which are less likely to shoot stray than any conventional rifle) and they looked down at me like I was a retard and said "you need a stock to safely shoot that thing!" and wouldnt let me shoot it. Ignorance and attitude mixed together is just icky. Also, another aside (although not really negative towards this place since it happens everywhere...) I was probably 16 because I had just gotten my mosin, had experience shooting the mosin, a garand, SKS etc and when I asked to rent the AR15 the guy says you cant handle that, its an ASSAULT RIFLE!
-
9/18 SCFGPA IDPA
Man, if I didnt shoot the damn hostage I woulda had a wicked score. but still didnt do bad and I got most accurate first time I've seen my name up top Bob, props to you for shooting a wheel gun. That just looks crazy hard!
-
9/18 SCFGPA IDPA
I feel that I did well untill I blew a hostage away...lol...but at least the round went through and killed the bad guy Scores still arent out. Tom normally has them out at like 8pm the same day
-
saiga 7.62x39 muzzle brake?
http://mygunsnorthwest.com/ He does it for $20 IIRC, gotta ship it though. I would trust him more than anyone though. He builds AKs from scratch.
-
My new to me rifle...
So that they slide the same every time otherwise they will grab the bench and give you inconsistant forces/harmonics The bottle caps will make your resistance much less, and also much more consistant
-
My new to me rifle...
Look like thats the one! MUCH better than the piece of trash it comes with. It doesnt float and it puts uneven pressure on the barrel IIRC. Someone did a side by side comparison at 100 yards once by shooting the rifle stock, then throwing on the HS stock and shooting. Shrunk groups by HALF. Insane. It is the first thing I would do to this rifle. I dumped the original stock on gunbroker for $20. Make sure to use a torque wrench to install it so that if you ever take it off you can torque it to the same spec and not lose zero. If you want to borrow mine you can come up here and use it.
-
My new to me rifle...
I have the exact same rifle. Before I fired a single round I replaced the stock with an HS precision stock. It has an aluminum bedding block and the barrel floats right off the bat. This is my list: Remington 700 SPS varmint .308 Buschnell 6-18x scope EGW Picatinny rail 20MOA Burris rings, with the 6 screws each Scope lapped in, everything torqued to spec HS precision pro stock, torqued to spec Harris BRM-S bipod with podlock (make sure to put the feet on pill bottle caps for max accuracy from a bench) Blackhawk cheek pad/bag And, it does this with 5 rounds at 100 yards:
-
saiga 7.62x39 muzzle brake?
If you want a '74 style brake you have no choice but to replace the front sight base with one of these http://gunbroker.com/ then grind off the bayonet lug ears and weld on a brake
-
saiga 7.62x39 muzzle brake?
Because the barrels aren't threaded, the FSB is threaded 24mm assuming you are talking about the '74 style brake. You can't mount that to the barrel unless you do some real bubba stuff to it.
-
AK-47 NJ?
AK-47 is and AK-74 is not banned by name. Avtomat kalashnikov types were banned by name (and who is to say the AK on your gun doesnt stand for something else...?) UNTIL the list was deemed too vauge by that sussex county case so the list does not matter, as long as it meets the evil feature requirements. Even if it says "AVTOMAT KALASHNIKOV" on the side of the rifle it is NOT IDENTICAL TO ITSELF if it does not have 2 or more features. If I write COLT AR-15 on my air gun is it illegal? NO. Of course, IANAL, but this is pretty solid... Either way, I have yet to see an AK style rifle actually say AK on it at all except those IO rifles.
-
9/18 SCFGPA IDPA
I'm in!
-
Wolf 9mm
AIM has it for 7.95 a box IIRC. Wolf is fine. It wont wear out your gun, it wont blow up your gun, and its more accurate than winchester and blazer brass so why not?
-
Here's my latest
- Florida non-resident CCW courses
Hunters ed courses are FREE and are held across the state- Need gunsmith in North Jersey (Oakland area)...
They are expensive, but for something like fitting I would go nowhere else. General gunsmithing anyone can do but fitting is different.- Need gunsmith in North Jersey (Oakland area)...
Griffin & Howe, accept no substitutes!- The Official NJGF Photo Thread!
10 rounds, 25 yards offhand, S&W 1911 pro. I love this thing!- Zombie Shoot with Black Powder
Thats %100 badass!- Help deciding
Those were the century Tantals that had the keyholing issues, just the tantals. They were US barrels and the bore diameter was to 556 spec not 545. They were made by green mountain, not surplus barrels.... Breaking a tap off isnt the rifles fault, its the idiot turning the taps fault. You can break a tap off in an AR too, or a Ferrari... Now...if your friend had a WASR and not a saiga he wouldnt have to be tapping the trunnion in the first place! - Florida non-resident CCW courses