Everything posted by autoxnyc
- Macbook Pro Vs. Macbook Air
- Admit It.... Safe Queens
-
357 Revolver Poll
I love GP-100s. But everyone should have a blued Python! That thing is work of art!
-
Colt python Trigger job.
It'll be hard to find someone local who are familiar with these Colts. They were not made for a while now. I would send it to Colt. OTOH, The Python needs a trigger job? The one on mine feels great!
-
Experience with Sig X-Change kit?
OK. I know there's no difference if you get the non X-change pistol. but on TGS for the 229 is says the X-change kit slide won't work with regular framed 229. I was just wondering if that's the case with the 220. I am interested in getting the Xchange kit 220 carry slide and use it on the SuperMatch frame
-
Experience with Sig X-Change kit?
http://www.topgunsupply.com/sig-sauer-p220-carry-caliber-x-change-kit-.45acp.html Out of stock now but put a stock watch on it. I did that and every now and then it's in stock on TGS.
-
1911 v sig 220
Unless you are looking at the SAO 220. The DA 220 is totally different in terms of operations as you are already aware. If this is only a range gun, yes you can just cock the first shot and fire every shot in SA mode. But in terms of potentially carrying, it's a DA vs SAO debate. You can carry the 220 loaded and decocked and the 1911 will be cocked and locked. So in case of carrying or in competition, the 220 will have different trigger feel on the first shot. The alloy framed 220 will be lighter than most 1911s (most are steel framed) and most 1911s will have a better trigger(in SA mode).
-
Experience with Sig X-Change kit?
Bry@n, Do you know for the 220 if the frame for the regular model and X-change kit is the same? I know for 229 it's not. If I were to buy a 220 Carry slide for the X-change kit, will it fit on the frame of my 220 Super Match? thanks! - Daniel
-
1911 Swap Possibilities/Suggestiions
What's your budget? Colt is overpriced but they are nice. They don't have any guns right now that comes with lot's of bells and whistles. Sig is not in the same league, AFAIK they are mass produced and have mostly MIM parts. I personally don't have much experience with S&W but I hate the way they look esp with the external extractor. You should really take a look at Les Baer and Dan Wesson Valor. Baer starts out between 1k to 2k and are really well made. They are a little rough on the external details like checkering and such when compared to Wilson or Brown. The Valor has pretty much everything you want, comes with some Ed Brown parts and is highly regarded. Not all 1911s are the same and you can definitely tell a difference. From the factory I think Wilsons have the nicest trigger, and Browns has the nicest fit and finish.
-
First ever deer, DOWN! :-)
Nice shot man!
-
WWII P-38 at AIM Surplus
Home come RC P38s still have major parts matching unlike the K98s? Is it because they captured a lot less pistols? Also did Ivans put on any markings? Is the X on some of them put on by the Russians?
-
WWII P-38 at AIM Surplus
Really? I don't really know the going price and haven't check gun show. What's the going rate for these? Last time I checked at a store (The one in Stirling but I think they moved to PA) they wanted 1k+. But those might be all matching.
-
WWII P-38 at AIM Surplus
I know it's not a Luger No way in hell with my luck to be able to find a Luger in decent shape at that price.
-
WWII P-38 at AIM Surplus
serial on main parts match. decent shape and $540. Dunno if this is really that great of a deal but I ordered one http://www.aimsurplus.com/product.aspx?item=F3P38CYQ&name=German%20WWII%20P38%209mm%20Pistol%20CYQ%20%28Spree%20Werke%20Factory%29
-
MecGar(Italy) 15RD magazines for Sig Saurer P226
BTW never seen a 229 SAS with SS frame? Did you get it coated? Nice looking Sig!
-
MecGar(Italy) 15RD magazines for Sig Saurer P226
That's not a 228 is it? Looks like a 229SAS. Anyway MecGar makes mags for 228 and they hold 15 rounds.
-
Permit Shotgun season opener doe
Are the trajectory of 20 and 12 GA slugs around the same? I was looking at the specs of the Hornady slugs and it looks about the same. You would think the 20 would shoot flatter but I guess in a slug the case volume is also a lot smaller for the 20ga since it's not like a necked down rifle case.
-
Worlds Smallest V12
I agree about the not running part. If you notice the cam shafts and crank shaft are geared 1:1.
-
Permit Shotgun season opener doe
Nice one.. Is that a H&R Ultra Slug? 20 or 12? I want to get one to start hunting as well. I am deciding between this and the Savage 220.
-
CCW and Hunting Classes in North Jersey?
I want to get into hunting and was wondering if there are any hunting classes in NNJ? Also looking into getting a FL CCW permit and would appreciate it if anyone know any courses offered on weekends that also includes the application of the premit. TIA!
-
Sig P229 Elite
If you want the bling factor you can always get a Nickle 228 IMO Sig's factory nickle guns are the most tastefully done pimp guns Esp if you add the Nill grips. They are a little more rare but they do come up from time to time on Sigforums.com. I am still looking for one myself. 229 differs from the 228 mainly in the slide. The 228 was made the old way where the slide was "folded" or stamped carbon steel sheet and had the muzzle end welded to it. There's a separate breech block insert that's secured to the slide with 2 concentric roll pins. The 229 uses a slide milled from a solid block of SS. If I am correct the 229 was Sig's answer to chamber .40 and .357 on the 228 platform. It eliminates the breech block insert and also has external extractor vs internal. SS itself is more corrosion resistant than carbon steel. Older Sigs are known to rust if you don't keep them well oiled. The 228 were all made in Germany if I remember correctly where as only the initial batch of 229 were. Later ones had the frame imported from Germany and the gun was assembled in Exter. From people's consensus QA took a tumble after Mr. Kimber took over Sig USA. 228 had forged internals where as later guns has MIM parts. You can tell the difference in quality immediately from the trigger pull. Old German Sigs came with an excellent trigger out of the box where as the newer ones will need a trigger job to match that. The slide to frame tolerance were also consistently better on older guns.n There were a batch of later take down levers that were known to break esp on the .40 and .357 guns and as a result the slide would fly off the frame as the slide returns to battery. Like others have said. If you want .357 just get a .40 and buy an .357Sig barrel. That's the cool thing about either caliber, they are interchangeable. .357Sig is a fun round to shoot
-
Sig P229 Elite
In terms of grip size from my experience.. smallest to largest Sig E2 < Hogue G10/aluminum < Nill < Standard Sig < Elite Wood Grips I never tried Hogue finger wrap grips but I think those are definitely chunkier than standard Sig grips. I installed an E2 on one of my 229 and I am a bit disappointed after trying it for a bit. It definitely seems like an afterthought and is a Band-aid they applied without changing the frame. While it is slimmer, the back strap curves in more but also forces you to grip it lower if you want a good firm grip. It does help reaching the trigger on the DA pull very slightly. The Hogue and Nill are the best grips in my opinion.
-
Sig P229 Elite
There are plenty of used Sigs out there. Sigforum.com is a good source for it. You can tell how used a gun is generally from the pictures and these are sturdy guns and usually won't have any issues. The parts do not require fitting so if something is wrong you can easily replace it. Topgunsupply also sell police trade ins which are good value. Generally speaking older Sigs have higher quality than newer ones. But newer ones with milled slide are more resistant to rusting (not really an issue if you take care of your gun). If you want the regular (Nitron) guns and if you are sticking to 9mm. 228 is a better choice than 229 in my opinion. It has a thinner and lighter slide which will balance better. The 229 feels the same as a 226 in hand (grip is slightly shorter but doesn't make too much of a difference) with the only practical difference being a shorter slide. It is bulky for it's intended purpose and IMHO is not as good as a 226. The SRT kit can now be purchased directly from Topgunsupply. It is very easy to install yourself if you can detail strip a P series gun. I have done the conversion to 2 of my Sigs and also performed trigger jobs on them - New SRT kit will make the trigger pull gritty until you break it in.
-
Sig P229 Elite
You can actually hold the gun slightly higher on a Sig without a beavertail. For me I can put the web of my hand all the way up on a regular 226 where on the Elite the beavertail is in the way. It really doesn't make that much of a difference though and yes the bore axis is higher on Sigs. But they are heavier than more modern pistols with lower bore axis so I never felt Sigs have a disadvantage there.
-
Sig P229 Elite
I do have a regular 226. Although it's a much older West German version. The SS Elite basically have the following features: Beavertail - nice to look at but functionally it doesn't really make any difference. There's no hammer bite on the 226. The beaver tail does make holding the gun slightly more comfortable. Wood grip - cosmetic feature and ergonomically it's not that great. Too thick for an already thick grip. You are better off getting an aftermarket Nill grip which looks better and is very slim. SRT firing system - super short reset compared to the regular version. Great feature to have Night Sights - Elite comes standard with night sights Front cocking serration - the serrations on the 229 are rather thin and I don't know how functional the front ones are but looks kinda cool on a 229. I think that's about all the difference there is. The trigger is not any nicer on the Elite version, it's the same with SRT kit standard. For exclusivity I think you are probably better off with one of the 226 X5s. Shooting both the Elite with the SS frame has slightly less recoil than the alloy frame version. It will work better with the 22 conversion kit since the aluminum slide of the kit with the alloy frame will result in a super light gun which is no good in my book. Other than that there really doesn't much of a difference other than cosmetic upgrades. Here's a pic of my 226 SS Elite. I put on Nill grips and Sig nickle controls and had action work done by Sig. The nickle controls itself made the operation a lot smoother. I didn't change the hammer but I think that'll make the trigger even smoother.