Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

autoxnyc

Members
  • Joined

  • Last visited

Everything posted by autoxnyc

  1. You should be able to just ship them the barrel. When some of these rimfires are dry fired, it will peen a slot on the chamber face and the protrusion into the chamber area can cause jams. They'll simply grind the protrusion off. If you're handy with a Dremel you should be able to do it yourself.
  2. Nice review. So I take the ACR is ok to have in NJ as long as the AWB evil features(bayo lug, folding/tele stock, flash hider) are defeated? I guess the SCAR would be too since it's not explicitly on the ban list?
  3. I'm looking to get the Spike ST-15 stripped lower with Safe/Semi/Auto pictogram since that one is on sale on their site. Is that legal? I'm not even sure if there are physical difference between a semi and full auto receiver. Shouldn't the holes for the pins be different? thanks, Daniel
  4. autoxnyc replied to s8n's topic in AR Discussion
    The MT6400C although named "match target" is hardly a gun good for any type of marksman competition. It's essentially a NJ legal 6920/M4 clone. It has a carbine length gas system and comes with a non-match trigger. Colt does make a 20" NM rifle with HBar bbl although I don't think it's the best NM AR15 out there with stock components. For competition there are better options out there for less $$$, the RRA NM is probably a better buy since it comes with a good free float tube, a Wilson bbl I believe and much much better stock NM trigger.
  5. autoxnyc replied to s8n's topic in AR Discussion
    It is the best M4 to get in terms of Mil spec features. You get the best parts and it's "made right". However you probably won't be able to tell a big difference between the Colt M4 and most other big names from shooting it at the range. It shoots slightly smoother than others because it comes with a M16 full auto bolt carrier and H buffer. The compensator works really well too. If you want to upgrade and get rails for it I suggest you looking into the MT6400R. It is NJ legal and comes with full length rails and folding sights from the factory.
  6. That's one sweet looking gun!
  7. I went to the Forks of Delaware show in Allentown today. This show is HUGE, must have been several hundred tables there. A lot of C&R stuff, a lot of WWII rifles to pick from. They had crates of Yugo Mausers and Mosins there as well. $129 for laminated stock 91/30 and $115 for regular stock. I was there for some AR stuff, they wouldn't sell me a stripped AR lower because I'm from NJ. Does anyone know if it's legal for me to buy a stripped AR lower at a PA gunshow?
  8. autoxnyc replied to autoxnyc's topic in Rifles
    So if I shoot the corrosive stuff through my AR, will salt get on parts of the lower receiver? The steel parts lke the fcg, mag release and assorted pins are parts that can rust. Since the direct gas system blows the gas back into the receiver, how bad is it? Do you guys with AK clean the fcg and parts in the lower receiver after shooting the corrosive stuff?
  9. How do you like the P7? I love it. Other than very slight holster wear near the leading edges it's practically brand new. It's a very high quality pistol and the trigger is also really sweet. Has very good balance points very natually for me. will bring it to the range as soon as I can.
  10. 1945 M44 HK P7 West German Police Trade-in Grade A
  11. autoxnyc replied to autoxnyc's topic in Rifles
    Thanks. Yeah I wanted to just use it to shoot to the Mill surp stuff. Seems like the Wolf/Silver Bear stuff is no cheaper than their 223s so I'm considering shooting the corrosive stuff. They go for $120 for 1080 rounds. I will be using it for practice/plinking so I figure the accuracy is more than enough. Since the barrel/chamber/bcg are chromelined on the upper I am not too worried about it. I think the only thing I won't be able to clean easily is the gas tube. Probably have to pay more attention to steel parts in the lower too.
  12. autoxnyc posted a topic in Rifles
    How's the accuracy of the Soviet 5.45x39 when compared to 5.56NATO and 7.62x29? I bought a S&W 5.45x39 AR upper and am planning on shooting Silver Bear non corrosive ammo through it.
  13. I was at Hackettstown Guns and Ammo and they had a really clean 91/30 round receiver for $120 with sling/bayonet.
  14. I would like to change out the stock on my Colt MT6400 to a Sully stock. Do I just need a castle nut spanner wrench to take the tube off? The castle nut is staked I believe, will I need to replace the nut? thanks! - Daniel
  15. I have a 226 Elite with stainless frame. I go t a 22 conversion for it and it's been flawless. I did upgrade to a stainless guide rod and last round lock mag followers. I think the SS guide rod might have something to do with reliability. I think any alloy/plastic gun in 22 will be way too light. (Walther P22 and Sig Mosquito). Someone already suggested, the CZ75 with their 22 conv kit is probably the way to go if you don't want to get a Ruger/BuckMark/SW.
  16. They sell them in 5x100 boxes. Never in bricks. But the Walmart prices you listed is probably the lowest I have seen recently.
  17. Hmmm, when I was searching people are selling it close to $7/100. Do you know any place selling it at $25 for 500? I don't see it at Cabelas right now but they sell 22LR non bulk at about $7/100 on sale. http://www.cabelas.com/cabelas/en/templ ... hasJS=true I thought CCI Mini Mags are at higher end ammo. At $36 per $500 it is roughly 2x the correct price. Cabelas has them sometime for $19.99 which is the right price. Up to maybe $25 / 500 is reasonable. At $36 per 500, they are absolutely raping you...
  18. Georgia Arms has them in stock. I stocked up last time when they had it in stock. Dunno if it's the best price but I think it's fair. Link for both hollow point and round nose: http://georgia-arms.com/cci22longriflem ... brick.aspx http://georgia-arms.com/cci22longriflem ... brick.aspx
  19. CCI Mini Mags are high velocity. I believe there are 2 versions, hollow point and standard. Both are lead core with copper plating. HP version is 36 grains and MV is 1260ft/sec. It will cycle better than standard velocity on some semi autos due to increased recoil. I run the non hollow poing in my 22s. I have a Sig 226 Conversion kit which is very picky with ammo and known to have feed/eject issues with many types of ammo. However it runs flawlessly with MiniMags. I have put 900 rounds through the kit with only 2 cleanings and have no feeding issues at all. They also run well in my GSG 5 SD. I put 200 rounds through it last weekend and not a single issue.
  20. Nice. Is that a Colt WWI 1911 replica?
  21. How long ago since your last acquisition? With only two permits, you might be better off waiting the 30 days for each. The issuing authority retains the permits and sends in the forms, so you are relying on 2 government agencies to do a simple task. What do you think the turn around time might be? :roll: I have 2 left and got an extension on 4/15. I suppose at this point one will just go to waste. I doubt they'll get them back to me before 7/15. Might as well apply for new ones. Can I apply for exemption when I apply for new P2P? It seems like they require that you know in advance exactly what I am getting including serial numbers.
  22. Removable mag on the Enfield is a moot point since it holds 10. Try removing one of these 'removable' mag and reinserting a loaded one =) Not so removable lol Will be faster reloading those with stripper clips. Do they hold any matches that allows AR15 NM? How many shooting positions are there? standing/prone and with slow and rapid fire? thanks!
  23. No problem with an Enfield... Mad minute with 10 rounds in the mags. Or 12 if using the Ishapore 308 Enfield 10 rounds in 60 seconds does sound really difficult especially at 200 yards. You're right, having peep sight definitely will help lots. Those little black dots are hard to see with iron sights that far away.
  24. Say if I already have P2P, can I submit these 2 forms and get permission? Do I send these to my local PD or NJSP? I hope the turn around is fast so my permits don't expire
  25. Wow that looks like fun! Do you have to be a member to participate in one of these? What rifles are allowed? Are they all shot at 200yards?

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.